热压烧结制备SiC增强石墨复合材料及其性能
Fabrication and properties of SiC reinforced graphite composites by hot-pressing sintering

DOI: 10.13801/j.cnki.fhclxb.20150120.003

Keywords: SiC,石墨,热压烧结,复合材料,摩擦性能
SiC,graphite,hot-pressing sintering,composites,friction properties

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	Ma W, Liu F S. Fffecf of porosity on the attenuation coefficient and mechanical properities of glass fiber reinforced composites[J]. Acta Materiae Compositae Sinica, 2012, 29(5): 69-75 (in Chinese). 马雯, 刘福顺. 玻璃纤维复合材料孔隙率对超声衰减系数及力学性能的影响[J]. 复合材料学报, 2012, 29(5): 69-75.
[2]	Yamamoto O, Imai K, Sasamoto T, et al. Preparation of carbon material with SiC-concentration gradient by silicon impregnation and its oxidation behaviour[J]. Journal of the European Ceramic Society, 1993, 12(6): 435-440.
[3]	Wang M, Woo K, Kim D, et al. Study on impregnation of polytetrafluoroethylene in graphite for use as fuel cell collector[J]. International Journal of Hydrogen Energy, 2005, 30(9): 1027-1030.
[4]	Liu Z J, Guo Q G, Song J R, et al. Effect of Ti dopant on shrinkage and performance of MCMB-derived carbon laminations[J]. Carbon, 2007, 45(1): 146-151.
[5]	Markevich E, Pollak E, Salitra G, et al. On the performance of graphitized meso carbon microbeads (MCMB)-meso carbon fibers (MCF) and synthetic graphite electrodes at elevated temperatures[J]. Journal of Power Sources, 2007, 174(2): 1263-1269.
[6]	Ge Y C, Yi M Z, Huang B Y. Tribology properties of C/C composites and graphite at non-lubrication wear environment[J]. Acta Materiae Compositae Sinica, 2004, 21(6): 93-97 (in Chinese). 葛毅成, 易茂中, 黄伯云. C/C 复合材料与石墨材料干态摩擦磨损行为[J]. 复合材料学报, 2004, 21(6): 93-97.
[7]	Zhu Z G, Xu H J, Bai S, et al. Influence of surface state on the mechanical seal properties of the resin impregnated graphite composites[J]. Carbon Techniques, 2013, 32(2): 23-25 (in Chinese). 朱振国, 徐红军, 白朔, 等. 表面状态对浸树脂石墨复合材料密封性能的影响[J]. 炭素技术, 2012, 32(2): 23-25.
[8]	Hu Y F, Liu Q, Jiang W W, et al. Study of friction and wear properties on three kinds of antimony impregnated graphite[J]. Journal of China Coal Society, 2011, 36(2): 351-354 (in Chinese). 胡亚非, 刘颀, 蒋文武, 等. 3 种浸锑石墨材料的摩擦磨损性能实验研究[J]. 煤炭学报, 2011, 36(2): 351-354.
[9]	Zhou X K, Tong M X. Microstructure of graphite brush impregnated with silver and its friction-wear behaviour[J]. New Carbon Materials, 2000, 15(1): 28-34 (in Chinese). 周序科, 佟明欣. 浸银石墨电刷的显微组织结构与摩擦磨损的研究[J]. 新型炭材料, 2000, 15(1): 28-34.
[10]	Hu Y F, Wang Q L, Liu Q, et al.Graphite materials lubricant film friction and wearing stability[J]. Journal of China University of Mining & Technology, 2010, 39(2): 223-226 (in Chinese). 胡亚非, 王启立, 刘颀, 等. 石墨密封材料润滑膜形成规律及摩擦磨损研究[J]. 中国矿业大学学报, 2010, 39(2): 223-226.
[11]	Favre A, Fuzellier H, Suptil J. An original way to investigate the siliconizing of carbon materials[J]. Ceramics International, 2003, 29(3): 235-243.
[12]	Fan X, Yin X, He S, et al. Friction and wear behaviors of C/C-SiC composites containing Ti3SiC2[J]. Wear, 2012, 274: 188-195.
[13]	Deng Z Z. New carbon graphite sealing anti-wear materials-siliconized graphite[C]//Colloquium on the 22th of Carbon-Graphite Material, 2010: 65-67 (in Chinese). 邓祖柱. 新型炭石墨密封抗磨材料--浸硅石墨[C]//第 22 届炭-石墨材料学术会论文集, 2010: 65-67.
[14]	Moraru V, Lebovka N, Shevchenko D. Structural transitions in aqueous suspensions of natural graphite[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2004, 242(1-3): 181-187.
[15]	Guo H, Li X, Xie J, et al. Effects of Ni substitution on the properties of Co3O4/graphite composites as anode of lithium ion batteries[J]. Energy Conversion and Management, 2010, 51(2): 247-252.
[16]	Siegrist M E, Amstad E D, Lffler J F. Tribological properties of graphite-and ZrC-reinforced bulk metallic glass composites[J]. Intermetallics, 2007, 15(9): 1228-1236.
[17]	Chen W, Yan Z G, Yu J K. Effect of B2O3 addition on graphitization of pitch coke[J]. Journal of Materials and Metallurgy, 2007, 6(2): 158-160 (in Chinese). 陈伟, 颜正国, 于景坤. B2O3 对沥青焦石墨化影响的研究[J]. 材料与冶金学报, 2007, 6(2): 158-160.
[18]	Zhang Y D, Zhang T. Preparation of graphite composite by Ti-Cu alloy pressureless infiltration method and its microstructure and properties[J]. Journal of Materials Engineering, 2011(6): 39-42 (in Chinese). 张雅丁, 张涛. 钛铜合金无压浸渗石墨基复合材料的制备及其组织与性能[J]. 材料工程, 2011(6): 39-42.
[19]	Zhang Y H, Xiao Z C, Wang J P, et al. Effect of pyrocarbon content on thermal and frictional properties in C/C preforms of C/C-SiC composites[J]. Wear, 2010, 269(1): 132-138.
[20]	Bao Y W, Cao Z C, Ma J R, et al. GB/T 6569-2006 Fine ceramics (advanced ceramics, advanced technical ceramics)-Test method for flexural strength of monolithic ceramics at room temperature[S]. Beijing: Standards Press of China, 2006 (in Chinese). 包亦望, 曹增辰, 马眷荣, 等. GB/T 6569-2006精细陶瓷弯曲强度试验方法[S]. 北京: 中国标准出版社, 2006.
[21]	Song Z F. Properties and applications of carbon and graphite products[M]. Beijing: Mechanical Industry Press, 1987: 18-24 (in Chinese). 宋正芳. 碳石墨制品的性能及其应用[M]. 北京: 机械工业出版社, 1987: 18-24.

Full-Text