短切碳纤维增强尼龙66复合材料注塑成型工艺模拟
Simulation of injection molding process of chopped carbon fiber reinforced nylon 66 composites

DOI: 10.13801/j.cnki.fhclxb.20160802.001

Keywords: 碳纤维,复合材料,尼龙,注塑成型,毛细管流变仪
carbon fiber,composite,nylon,injection molding,capillary rheometer

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	张其, 王孝军, 张刚, 等. 碳纤维增强尼龙PA6T/66共聚物复合材料的制备及性能研究[J]. 塑料工业, 2015, 43(4):124-126. ZHANG Q, WANG X J, ZHANG G, et al. Preparation and properties of carbon fiber reinforced PA6T/66 composites[J]. China Plastics Industry, 2015, 43(4):124-126(in Chinese).
[2]	KOBAYASHI D, HSIEH Y T, TAKAHARA A. Interphase structure of carbon fiber reinforced polyamide 6 revealed by microbeam X-ray diffraction with synchrotron radiation[J]. Polymer, 2016, 89:154-158.
[3]	水兴瑶, 刘猛, 朱曜峰, 等. 水性上浆剂对碳纤维表面及碳纤维/环氧树脂复合材料界面性能的影响[J]. 复合材料学报, 2016, 33(2):273-279. SHUI X Y, LIU M, ZHU Y F, et al. Effect of waterborne sizing agent on carbon fiber surface and properties of carbon fiber/epoxy composites interface[J]. Acta Materiae Compo-sitae Sinica, 2016, 33(2):273-279(in Chinese).
[4]	COLUCCI G, OSTROVSKAYA O, FRACHE A, et al. The effect of mechanical recycling on the microstructure and properties of PA66 composites reinforced with carbon fibers[J]. Journal of Applied Polymer Science, 2015, 132(29):42275(1-9).
[5]	林志勇, 黄丽丹, 肖凤英, 等. 炭纤维表面官能团异氰酸酯化及阴离子接枝尼龙6研究(Ⅲ)——接枝对CF/PA6复合材料中PA6多重熔融行为的影响[J]. 高分子材料科学与工程, 2004, 20(3):92-94. LIN Z Y, HUANG L D, XIAO F Y, et al. The isocyanation of chemical functions on carbon fiber surface and its anionic polymerization of polyamide 6(Ⅲ)——The effect of grafting carbon fiber on the melting behavior of PA6 in CF/PA6 composites[J]. Polymer Materials Science and Engineering, 2004, 20(3):92-94(in Chinese).
[6]	ISOGAWA S, AOKI H, TEJIMA M. Isothermal forming of CFRTP sheet by penetration of hemispherical punch[J]. Procedia Engineering, 2014, 81:1620-1626.
[7]	KARSLI N G, AYTAC A. Tensile and thermomechanical properties of short carbon fiber reinforced polyamide 6 compo-sites[J]. Composites Part B:Engineering, 2013, 51:270-275.
[8]	FU S Y, LAUKE B, MADER E, et al. Fracture resistance of short-glass-fiber reinforced and short-carbon-fiber-rein-forced polypropylene under charpy impact load and its depen-dence on processing[J]. Journal of Materials Processing Technology, 1999, 89-90:501-507.
[9]	彭树文. 碳纤维增强尼龙66的研究[J]. 工程塑料应用, 1998, 26(9):5-7. PENG S W. Study on PA66 reinforced with carbon fiber[J]. Engineering Plastics Application, 1998, 26(9):5-7(in Chinese).
[10]	MOLNáR S, ROSENBERGER S, GULYáS J, et al. Structure and impact resistance of short carbon fiber rein-forced polyamide 6 composites[J]. Journal of Macromolecular Science B, 1999, 38(5-6):721-735.
[11]	钱春香, 赵洪凯, 李志刚, 等. 碳纤维增强尼龙复合材料渗透模型的研究[J]. 材料导报, 2009, 23(12):63-68. QIAN C X, ZHAO H K, LI Z G, et al. Research on in-filtration model of carbon fiber reinforced in-situ polymerization nylon 6 composite[J]. Materials Review, 2009, 23(12):63-68(in Chinese).
[12]	王莲英, 李玲, 董风云, 等. 透明尼龙熔体流变性能的研究[J]. 华北工学院学报, 2005, 26(4):289-291. WANG L Y, LI L, DONG F Y, et al. Study on rheological properties of transparent nylon[J]. Journal of North China Institute of Technology, 2005, 26(4):289-291(in Chinese).
[13]	梁基照. 聚合物材料加工流变学[M]. 北京:国防工业出版社, 2008:80-86. LIANG J Z. Polymer materials processing rheology[M]. Beijing:National Defence Industry Press, 2008:80-86(in Chinese).
[14]	路书芬, 王利霞, 申长雨. 注塑工艺参数对PP塑料件拉伸强度的影响研究[J]. 工程塑料应用, 2013, 41(1):51-53. LU S F, WANG L X, SHEN C Y. Research on influence of process parameters on tensile strength of PP plastic parts[J]. Engineering Plastics Application, 2013, 41(1):51-53(in Chinese).
[15]	徐英凯, 朱姝, 袁象恺, 等. 纺织结构碳纤维增强尼龙6(CFF/PA6)复合材料的模压成型工艺[J]. 塑料工业, 2015, 43(7):48-51. XU Y K, ZHU S, YUAN X K, et al. Compression molding processing of carbon fiber fabric reinforced nylon6(CFF/PA6) composite[J]. China Plastics Industry, 2015, 43(7):48-51(in Chinese).
[16]	GONCALVES J, DOS SANTOS J F, CANTO L B, et al. Friction spot welding of carbon fiber-reinforced polyamide 66 laminate[J]. Materials Letters, 2015, 159:506-509.
[17]	李海梅, 高峰, 申长雨. 注射成型工艺对制品质量的影响[J]. 工程塑料应用, 2003, 31(5):51-55. LI H M, GAO F, SHEN C Y. Influence of the injection molding technology on the product quality[J]. Engineering Plastics Application, 2003, 31(5):51-55(in Chinese).

Full-Text