|
|
- 2017
聚氨酯-聚乳酸共混物的制备及性能
|
Abstract:
| [1] | 刁华鑫. 聚乳酸复合材料的制备与性能研究[D]. 扬州:扬州大学, 2011. DIAO H X. The properties and preparation of PLA composites[D]. Yangzhou:Yangzhou University, 2011(in Chinese). |
| [2] | ABE H, TAKAHASHI N, KIM K J, et al. Thermal degradation processes of end-capped poly(L-lactide)s in the presence and absence of residual zinc catalyst[J]. Biomacromolecules, 2004, 5(4):1606-1614. |
| [3] | 陈一, 罗礼发, 曾广胜, 等. PLA-g-GMA/Ope-POSS/PLA复合材料的制备与性能[J]. 复合材料学报, 2016, 33(1):61-70. CHEN Y, LUO L F, ZENG G S, et al. Preparation and properties of PLA-g-GMA/Ope-POSS/PLA composites[J]. Acta Materiae Compositae Sinica, 2016, 33(1):61-70(in Chinese). |
| [4] | 徐朝华. PLA/PEO共混物的结晶行为研究[J]. 广东化工, 2012, 39(6):68-70. XU C H. Crystallization behavior investigation of polylactide/poly (ethylene oxide) composites[J]. Guangdong Chemical Industry, 2012, 39(6):68-70(in Chinese). |
| [5] | HAO X, KASCHTA J, LIU X, et al. Entanglement network formed in miscible PLA/PMMA blends and its role in rheological and thermo-mechanical properties of the blends[J]. Polymer, 2015, 80:38-45. |
| [6] | 廖双泉. 热塑性弹性体及其应用[M]. 北京:中国石化出版社, 2014. LIAO S Q. Thermoplastic elastomer and its application[M]. Beijing:China Petrochemical Press, 2014(in Chinese). |
| [7] | VLADISLAV J, CVETINOV M, SRDAN R, et al. Bio-plastics and elastomers from polylactic acid/thermoplastic polyurethane blends[J]. Journal of Applied Polymer Science, 2014, 131(22):547-557. |
| [8] | 李雅琼, 赵鑫, 王标兵. PLA/环氧化蓖麻油基聚氨酯共混物的动态流变性能[J]. 工程塑料应用, 2014(9):52-54. LI Yaqiong, ZHAO Xin, WANG Biaobing. Dynamic rheological properties of PLA/epoxidized castor oil-based polyurethane blends[J]. Engineering Plastics Application, 2014(9):52-54(in Chinese). |
| [9] | 李红月, 卢秀萍, 杨华, 等. 细菌纤维素/聚乳酸互穿网络复合材料的结晶与熔融[J]. 复合材料学报, 2015, 32(5):1294-1300. LI H Y, LU X P, YANG H, et al. Crystallization and melting of bacterial cellulose/polylactic acid composites with interpenetrating network[J]. Acta Materiae Compositae Sinica, 2015, 32(5):1294-1300(in Chinese). |
| [10] | SOLARSKI S, FERREIRA M, DEVAUX E. Characterization of the thermal properties of PLA fibers by modulated differential scanning calorimetry[J]. Polymer, 2005, 46(25):11187-11192. |
| [11] | 蔺海兰, 朱庆兰, 卞军, 等. 共混型石墨烯-nano SiO2/TPU复合材料的制备与性能[J]. 复合材料学报, 2016, 33(7):1382-1389. LIN H L, ZHU Q L, BIAN J, et al. Preparation and properties of blended graphene oxide-nano SiO2/TPU composites[J]. Acta Materiae Compositae Sinica, 2016, 33(7):1382-1389(in Chinese). |
| [12] | MANO J F. Structural evolution of the amorphous phase during crystallization of poly(L-lactic acid):A synchrotron wide-angle X-ray scattering study[J]. Journal of Non-Crystalline Solids, 2007, 353(26):2567-2572. |
| [13] | 欧忠星, 郑玉婴, 肖东升, 等. 功能化改性还原氧化石墨烯-碳纳米管/热塑性聚氨酯复合材料膜的制备及性能[J]. 复合材料学报, 2016, 33(3):486-494. OU Z X, ZHENG Y Y, XIAO D S, et al. Preparation and properties of functional modification reduced graphene oxide-carbon nanotubes/thermoplastic polyurethane composite films[J]. Acta Materiae Compositae Sinica, 2016, 33(3):486-494(in Chinese). |
| [14] | 李明, 李玉芳. 聚乳酸增韧改性研究进展[J]. 乙醛醋酸化工, 2016(5):25-28. LI M, LI Y F. The research progress of toughening modified polylactic acid[J]. Acetaldehyde Acetate Chemical, 2016(5):25-28(in Chinese). |
| [15] | 王成成, 李梦倩, 雷文. 3D打印用聚乳酸及其复合材料的研究进展[J]. 塑料科技, 2016, 44(6):89-91. WANG C C, LI M Q, LEI W. Research progress on 3D printing polylactic acid and its composites[J]. Plastics Science and Technology, 2016, 44(6):89-91(in Chinese). |
| [16] | 余洁, 韩建, 朱斐超, 等. 可全生物降解的PLA/PBAT/PHBV共混材料的结构与性能[J]. 复合材料学报, 2016, 33(8):1608-1614. YU J, HAN J, ZHU J J, et al. Structures and properties of fully biodegradable PLA/PBAT/PHBV blends[J]. Acta Materiae Compositae Sinica, 2016, 33(8):1608-1614(in Chinese). |
