|
|
- 2017
对称非均匀层合板梁的弯扭耦合效应
|
Abstract:
为了研究复合材料风力机叶片的弯扭耦合效应，将风力机叶片简化为对称非均匀铺层层合板梁，采用实验和数值分析方法研究耦合区域对叶片弯扭耦合效应的影响。给出了对称非均匀层合板梁的铺层方式及其制作工艺，设计了对称非均匀层合板梁的弯扭耦合效应实验，给出了实验原理及测量方法，测量了对称非均匀层合板梁的挠度和扭转角。基于ANSYS软件建立了对称非均匀层合板梁的有限元模型，计算了在集中力载荷作用下梁的变形。通过有限元数值分析结果与实验结果对比，结果表明：耦合区域对对称非均匀层合板梁的变形行为产生重要影响，采用中部耦合区域铺层方式可以获得显著的弯扭耦合效应。 The composite wind turbine blade was simplified to a symmetric un-uniform laminate beam for researching its bend-twist coupling effect. The influence of coupling area on bend-twist coupling effect was studied by experiment and numerical analysis method. The ply layouts and manufacturing method of symmetric un-uniform laminated plate beams were presented. The bend-twist coupling test of symmetric un-uniform laminated plate beams was designed, in which the principle and measuring method of the experiment were given. The deflection and twist angle of un-uniform symmetric laminated plate beams were tested in the experiment. The finite element models were established based on ANSYS software and their deformations were got under the concentrated force. Comparing the numerical results with the experimental results, it shows that coupling area has an important influence to deformational behavior of symmetric un-uniform laminated plate beams and coupling in central region can obtain remarkable bend-twist coupling effect. 国家自然科学基金（51675179）；河北省科技支撑技术项目（16214304D）；中央高校基本科研业务费专项资金（13MS82；2014ZD33）
| [1] | KARAOLIS N M, JERONIMIDIS G, MUSSGROVE P J. Composite wind turbine blades: Coupling effects and rotor aerodynamic performance[C]//Proc EWEC' 89, European Wind Energy Conf. Glasgow: Scotland, 1989: 244-248. |
| [2] | LIN H J, LAI W M. A study of elastic coupling to the wind turbine blade by combined analytical and finite element beam model[J]. Journal of Composite Materials, 2010, 44: 2643-2665. |
| [3] | WALSH J M. Composite material bend-twist coupling for wind turbine blade apllications[D]. Wyoming: University of Wyoming, 2009. |
| [4] | ONG C H, TSAI S W. Design, manufacture and testing of a bend-twist D-spar[R]. SAND-1999-1324, Albuquerque: Sandia National Laboratories, 1999. |
| [5] | BOTTASSO C L, CAMPAGNOLO F, CROCE A, et al. Optimization-based study of bend-twist coupled rotor blades for passive and integrated passive/active load alleviation[J]. Wind Energy: 2013, 16(8), 1149-1166. |
| [6] | 许德伟, 郦正能, 崔德刚.非对称非均衡层板弯扭耦合效应研究[J].北京航空航天大学学报, 2001, 27(2): 167-170. XU D W, LI Z N, CUI D G. Bend twist coupling effects of unsymmetric and unbalanced laminate[J]. Journal of Beijing University of Aeronautics and Astronautics, 2001, 27(2): 167-170 (in Chinese). |
| [7] | 李艳菲, 李敏, 顾轶卓, 等.风电叶片用真空灌注型环氧树脂及其复合材料性能研究[J]. 玻璃钢/复合材料, 2012(04): 109-114. LI Y F, LI M, GU Y Z, et al. Study on properties of epoxy resin and composites with vacuum assisted resin infusion molding for wind turbine blade[J]. Fiber Reinforced Plastics/Composites, 2012(04): 109-114 (in Chinese). |
| [8] | 熊美蓉, 段跃新, 董安琪, 等. 真空辅助树脂灌注工艺成型泡沫夹芯结构工艺设计与控制[J]. 复合材料学报, 2013, 30(03): 28-34. XIONG M R, DUAN Y X, DONG A Q, et al. Process design and control of the VARI forming foam-core structure[J]. Acta Materiae Compositae Sinica, 2013, 30(03): 28-34 (in Chinese). |
| [9] | 王竹林. 数字采样云纹法及其应用[D]. 大连: 大连理工大学, 2013. WANG Z L. The digital sampling moire method and its application[D]. Dalian: Dalian University of Technology, 2013 (in Chinese). |
| [10] | 崔深山, 万爽, 张涛, 等. 全复合材料主承力梁结构研制与分析验证[J]. 宇航材料工艺, 2016, 46(1): 52-56. CUI S S, WAN S, ZHANG T, et al. Manufacture and verify of composite main loading-bearing beam[J]. Aerospace Materials & Technology, 2016, 46(1): 52-56 (in Chinese). |
| [11] | 杨将新, 杨世锡, 唐贵基, 等. 机械工程测试技术[M].北京: 高等教育出版社, 2008: 109-126. YANG J X, YANG S X, TANG G J, et al. Mechanical measurement technology[M]. Beijing: Higher Education Press, 2008: 109-126 (in Chinese). |
| [12] | 尚洋, 于起峰.多能高效的测试新军-摄像测量的研究及应用进展[J]. 中国测试, 2013, 39(1): 1-7. SHANG Y, YU Q F. A multi-function and high-leverage force for measurement and test-videometrics and its research and application progress[J]. China Measurement & Test, 2013, 39(1): 1-7 (in Chinese). |
| [13] | 罗鹏, 高兰宁, 李贤德, 等. 真空灌注低成本成型工艺及其应用研究[J]. 玻璃纤维, 2014(01): 32-35. LUO P, GAO L N, LI X D, et al. Research and applicaion of low cost vacuum infusion molding process[J]. Fiber Glass, 2014(01): 32-35 (in Chinese). |
| [14] | 戴福隆, 沈观林, 谢惠民.实验力学[M]. 北京: 清华大学出版社, 2010: 111-119. DAI F L, SHEN G L, XIE H M. Experimental mechanics[M]. Beijing: Tsinghua University press, 2010: 111-119 (in Chinese). |
| [15] | 宋劭.基于影子云纹法的封装基板翘曲测量系统研究[D]. 武汉:华中科技大学, 2012. SHAO S. Study of warpage measurement system for packaging substrate based on shadow moire method[D]. Wuhan: Huazhong University of Science and Technology, 2012 (in Chinese). |
| [16] | 徐荣章, 关志东, 王仁宇, 等. 翼肋支撑对复合材料加筋板轴压性能的影响[J]. 复合材料学报, 2016, 33(4): 893-901. XU R Z, GUAN Z D, WAN G R Y, et al. Effects of rib support on axial compression behaviors of composite stiffened panels[J]. Acta Materiae Compositae Sinica, 2016, 33(4): 893-901 (in Chinese). |
| [17] | FEDOROV V A, DIMITROV N, BERGGREEN C, et al. Investigation of structural behavior due to bend-twist couplings in wind turbine blades[C]//Nafems Nordic Seminar. Simulating Composite Materials and Structures. Denmark, 2010:1-9. |
| [18] | 苑云, 张小虎, 朱肇昆, 等.大型风力发电叶片变形的摄像测量方法研究[J].计算机应用, 2012, 32(S1): 114-117. YUAN Y, ZHANG X H, ZHU Z K, et al. Deformation measurement of large-scale wind turbine blades using videometrics[J]. Journal of Computer Applications, 2012, 32(S1): 114-117 (in Chinese) |
| [19] | International Organization for Standardization. ISO 527—5 Plastics—Determination of tensile properties[S]. UK: British Standards Institution, 2009. |
| [20] | International Organization for Standardization. ISO14129 Fibre-reinforced plastic composites—Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method[S]. Switzerland: International Organization for Standardization, 1997. |
