基于超细晶硬质合金钻头的AFRP钻削性能
Drilling performance of ultrafine cemented carbide drill in machining aramid fiber reinforce polymer composites

DOI: 10.13801/j.cnki.fhclxb.20170307.002

Keywords: 超细晶硬质合金,芳纶纤维,钻头,钻削力,钻削温度
ultrafine cemented carbide,aramid fiber,drill,drilling force,drilling temperature

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	AZMIR M A, AHSAN A K, RAHMAH A. Effect of abrasive water jet machining parameters on aramid fibre reinforced plastics composite[J]. International Journal of Material Forming, 2009, 2 (1): 37-44.
[2]	陈燕, 葛恩德, 傅玉灿, 等. 碳纤维增强树脂基复合材料制孔技术研究现状与展望[J]. 复合材料学报, 2015, 32 (2): 301-316. CHEN Y, GE E D, FU Y C, et al. Review and prospect of drilling technologies for carbon fiber reinforced polymer[J]. Acta Materiae Composite Sinica, 2015, 32 (2): 301-316 (in Chinese).
[3]	LI Z, CHENG X D, HE S, et al. Aramid fibers reinforced silica aerogel composites with low thermal conductivity and improved mechanical performance[J]. Composites: Part A, 2016, 84(84): 316-325.
[4]	YANG H, SONG H W, ZHANG S. Experimental investigation of the behavior of aramid fiber reinforced polymer confined concrete subjected to high strain-rate compression[J]. Construction and Building Materials, 2015, 95: 143-151.
[5]	HIROGAKI T, AOYAMA E, INOUE H, et al. Laser drilling of blind via holes in aramid and glass/epoxy composites for multi-layer printed wiring boards[J]. Composites Part A: Applied Science and Manufacturing, 2001, 32(7): 963-968.
[6]	YANG J, ODEN M, JOHANSSON M P, et al. Grinding effects on surface integrity and mechanical strength of WC-Co cemented carbides[J]. CIRP, 2014, 13: 257-263.
[7]	XIONG J, GUO Z X, YANG M, et al. Tool life and wear of WC-TiC-Co ultrafine cemented carbide during dry cutting of AISI H13 steel[J]. Ceramics International, 2013, 39(1): 337-346.
[8]	涂俊翔, 林伟, 楼宇舟. 高速钻削碳纤维复合材料的钻头温度测量研究[J]. 福州大学学报, 2014, 42 (5): 732-736. TU J X, LIN W, LOU Y Z. Research on temperature measurement of high speed drilling carbon fiber reinforced plastics[J]. Journal of Fuzhou University, 2014, 42 (5): 732-736 (in Chinese).
[9]	温泉, 郭东明, 高航, 等. 碳纤维/环氧树脂复合材料制孔损伤综合评价方法[J]. 复合材料学报, 2016, 33(2): 265-272. WEN Q, GUO D M, GAO H, et al. Comprehensive evaluation method for carbon/epoxy composite hole-making damages[J]. Acta Materiae Compositae Sinica, 2016, 33(2): 265-272 (in Chinese).
[10]	ZHOU X K, WANG K, XU Z F, et al. Effect of powder particle size on gradient formation and grain growth in ultrafine crystalline gradient cemented carbide[J]. Int. Journal of Refractory Metals and Hard Materials, 2016, 56: 63-68.
[11]	ANTONOV M, VEINTHAL R, YUNG D L, et al. Mapping of impact abrasive wear performance of WC-Co cemented carbides[J]. Wear, 2015, 332: 971-978.
[12]	LIU C, LIU N, HE Y H, et al. The effects of micron WC contents on the microstructure and mechanical properties of ultrafine WC-(micro WC-Co) cemented carbides[J]. Journal of Alloys and Compounds, 2014, 594(4): 76-81.
[13]	AKHTAR F, HUMAIL I S, ASKARI S J, et al. Effect of WC particle size on the microstructure, mechanical properties and fracture behavior of WC-(W, Ti, Ta)C-6wt% Co cemented carbides[J]. International Journal of Refractory Metals & Hard Materials, 2007, 25(5-6): 405-410.
[14]	JOARDAR J, KIM S W, KANG S. Effect of nanocrystalline binder on the microstructure and mechanical properties of ultrafine Ti(CN) cermets[J]. Materials Science and Engineering A, 2003, 360(1-2): 385-389.
[15]	LV M, ZHENG F, WANG Q H, et al. Friction and wear behaviors of carbon and aramid fibers reinforced polyimide composites in simulated space environment[J]. Tribology International, 2015, 92: 246-254.
[16]	QIAN X Y, WANG H X, ZHANG D S, et al. High strain rate out-of-plane compression properties of aramid fabric reinforced polyamide composite[J]. Polymer Testing, 2016, 53: 314-322.
[17]	鲍永杰, 高航, 马海龙, 等. 单向C/E复合材料磨削制孔温度场模型的研究[J]. 机械工程学报, 2012, 48 (1): 169-176. BAO Y J, GAO H, MA H L, et al. Research on temperature model during grinding-drilling of unidirectional carbon/epoxy composites[J]. Journal of Mechanical Engineering, 2012, 48(1): 169-176 (in Chinese).
[18]	石文天, 刘汉良, 张加波, 等. 芳纶纤维复合材料钻削加工缺陷研究[J]. 中国塑料, 2013, 27(4): 71-74. SHI W T, LIU H L, ZHANG J B, et al. Research on cutting defects of aramid fiber composites[J]. China Plastics, 2013, 27(4): 71-74 (in Chinese).
[19]	OLIVEIRA A B, BASTOS A C, FERMANDES C M, et al. Corrosion behaviour of WC-10%AISI 304 cemented carbides[J]. Corrosion Science, 2015, 100: 322-331.
[20]	KONYASHIN I, RIES B. Wear damage of cemented carbides with different combinations of WC mean grain size and Co content, Part Ⅱ: Laboratory performance tests on rock cutting and drilling[J]. International Journal of Refractory Me-tals and Hard Materials, 2014, 45: 230-237.

Full-Text