|
|
- 2017
CFRP复合材料/钛合金叠层螺旋铣孔工艺
|
Abstract:
| [1] | 刘刚,张恒,王亚飞,等.碳纤维增强复合材料螺旋铣孔切削力及加工质量研究[J].复合材料学报, 2014, 31(5):1292-1299. LIU G, ZHANG H, WANG Y F, et al. Study on cutting force and machining quality of orbital drilling for CFRP[J]. Acta Materiae Compositae Sinica, 2014, 31(5):1292-1299(in Chinese). |
| [2] | 黄旭,朱知寿,王红红.先进航空钛合金材料与应用[M].北京:国防工业出版社, 2012:57-58. HUANG X, ZHU Z S, WANG H H. Advanced aeronautical titanium alloys and applications[M]. Beijing:National Defense Industry Press, 2012:57-58(in Chinese). |
| [3] | 王红嵩.难加工材料的螺旋铣孔技术研究[D].大连:大连理工大学,2012. WANG H S. Helical milling of difficult-to-cut material[D]. Dalian:Dalian University of Technology, 2012(in Chinese). |
| [4] | OLVERA, DAVID, et al. Hole making using ball helical milling on titanium alloys[J]. Machining Science & Techno-logy An International Journal, 2012, 16(2):173-188. |
| [5] | SADEK A, MESHREKI M, ATTIA M H. Characterization and optimization of orbital drilling of woven carbon fiber reinforced epoxy laminates[J]. CIRP Annals-Manufacturing Technology, 2012, 61(61):123-126. |
| [6] | 秦旭达,陈仕茂,刘伟成.螺旋铣技术在航空制造业中的发展应用[J].航空制造技术, 2009(6):58-60. QIN X D, CHEN S M, LIU W C, et al. Development and application of hole helical milling technology in aviation manufacturing assembly industry[J]. Aeronautical Manufacturing Technology, 2009(6):58-60(in Chinese). |
| [7] | IYER R, KOSHY P, NG E. Helical milling:An enabling technology for hard machining precision holes in AISI D2 tool steel[J]. International Journal of Machine Tools & Manufacture, 2007, 47(2):205-210. |
| [8] | 陆翠.CFRP/Ti-6Al-4V叠层结构螺旋铣孔过程工艺优化研究[D].天津:天津大学, 2012. LU C. The optimization research on helical milling of CFRP/Ti-6Al-4V stacks[D]. Tianjin:Tianjin University, 2012(in Chinese). |
| [9] | HE G, LI H, JIANG Y, et al. Helical milling of CFRP/Ti-6Al-4V stacks with varying machining parameters[J]. Transactions of Tianjin University, 21(1):56-63. |
| [10] | ZHOU L, KE Y, DONG H, et al. Hole diameter variation and roundness in dry orbital drilling of CFRP/Ti stacks[J]. International Journal of Advanced Manufacturing Technology, 2016:1-14. |
| [11] | 王亚飞.航空难加工材料螺旋铣孔专用刀具研究[D].杭州:浙江大学, 2014. WANG Y F. Research on the helical milling specialized tool for aeronautical hard-machining materials[D]. Hangzhou:Zhejiang University, 2014(in Chinese). |
| [12] | 刘刚,王亚飞,张恒.等.基于齿背冷却方式的复合材料/钛合金螺旋铣专用刀具,CN102728882A[P]. 2012. LIU G, WANG Y F, ZHANG H, et al.Composite material/titanium alloy helical milling special tool based on tooth back cooling mode, CN102728882A[P]. 2012(in Chinese). |
| [13] | 刘刚,王亚飞,张恒,等.基于分屑原理的螺旋铣孔专用刀具研究[J].机械工程学报,2014, 50(9):176-184. LIU G, WANG Y F, ZHANG H, et al. Research on helical milling specialized tool based on chip-splitting principle[J]. Journal of Mechanical Engineering, 2014, 50(9):176-184(in Chinese). |
| [14] | 李云雁,胡传荣.试验设计与数据处理[M].北京:化学工业出版社, 2005:212-213. LI Y Y,HU C R. Experiment design and data processing[M]. Beijing:Chemical Industry Press, 2005:212-213(in Chinese). |
| [15] | 成岳.工程试验设计方法[M].武汉:武汉理工大学出版社, 2011:169-170. CHENG Y. Engineering test design method[M]. Wuhan:Wuhan University of Technology Press, 2011:169-170(in Chinese). |
| [16] | 王荣国,武卫莉,古万里.复合材料概论[M].哈尔滨:哈尔滨工业大学出版社,2001:11-12. WANG R G, WU W L, GU W L. Introduction of composite materials[M]. Harbin:Harbin Institute of Technology Press, 2001:11-12(in Chinese). |
| [17] | DENKENA B, BOEHNKE D, DEGE J H. Helical milling of CFRP-titanium layer compounds[J]. CIRP Journal of Manufacturing Science and Technology, 2008, 1(2):64-69. |
| [18] | 单以才,何宁.叠层方式影响叠层构件大螺距螺旋铣孔研究[J].机械设计与制造, 2016(1):140-143. SHAN Y C, HE N. Investigation on the influence of laminated method on orbital drilling CFRP/Ti6Al4V stacks with big pitch[J]. Machinery Design & Manufacture, 2016(1):140-143(in Chinese). |
| [19] | WANG B, GAO H, CAO B, et al. Mechanism of damage generation during drilling of carbon/epoxy composites and titanium alloy stacks[J]. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manu-facture, 2014, 228(7):698-706. |
