电子束辐射对玻纤/尼龙6复合材料性能的影响
Electric beam irradiation effect on properties of glass fibers/nylon 6 composites

DOI: 10.13801/j.cnki.fhclxb.20161124.007

Keywords: 尼龙6,玻璃纤维,复合材料,电子束辐射,交联
nylon 6,glass fibers,composites,electron beam irradiation,crosslinking

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	罗延龄, 赵振兴. 高分子辐射交联技术及研究进展[J]. 高分子通报, 1999(4):88-99. LUO Y L, HAO Z X. Radiation cross-linking of polymers & its progress[J]. Polymer Bulletin, 1999(4):88-99(in Chinese).
[2]	张华明, 李秀榕, 杨克斌, 等. 电子束辐照对尼龙610性能的影响[J]. 辐射研究与辐射工艺学报, 1999, 17(4):249-251. ZHANG H M, LI X R, YANG K B, et al. Studies on EB radiation effect of the PA610[J]. Journal of Radiation Research and Radiation Processing, 1999, 17(4):249-251(in Chinese).
[3]	ZAHARESCU T, SILVA L G A, JIPA S, et al. Post-irradiation thermal degradation of PA6 and PA66[J]. Radiation Physic and Chemistry, 2010, 79:388-391.
[4]	PRAMANIK N K, HALDAR R S, NIYOGI U K, et al. Development of an advanced engineering polymer from the modification of nylon 66 by e-Beam irradiation[J]. Defence Science Journal, 2014, 64(3):281-289.
[5]	华林林. 尼龙6的紫外光交联及其阻燃材料的研究[D]. 合肥:合肥工业大学, 2013. HUA L L. Studies on photo-crosslinking of PA6 and its flame retardant materials[D]. Hefei:Hefei University of Technology, 2013(in Chinese).
[6]	刘飞跃, 张丽叶. 聚乙烯敏化辐射交联研究进展[J]. 中国塑料, 1999, 13(1):10-17. LIU F Y, ZHANG L Y. Advances in sensitized radiation-induced crosslinking of polyethylene[J]. China Plastics, 1999, 13(1):10-17(in Chinese).
[7]	杨明成, 朱军, 耿峰, 等. γ辐射对麦秸粉/PBS-PBAT复合材料性能的影响[J]. 复合材料学报, 2014, 31(4):925-930. YANG M C, ZHU J, GENG F, et al. Effects of γ-ray radiation on properties of wheat straw powder/PBS-PBAT composites[J]. Acta Materiae Compositae Sinica, 2014, 31(4):925-930(in Chinese).
[8]	孟伟涛. 高密度聚乙烯电子束敏化辐射交联的研究[D]. 北京:北京化工大学, 2011. MENG W T. Research on radiation crosslinking under electron beam of high density polyethylene with sensitizers[D]. Beijing:Beijing University of Chemical Technology, 2011(in Chinese).
[9]	李敏, 张佐光, 仲伟虹, 等. 电子束作用下树脂体系的固化行为[J]. 复合材料学报, 2001, 18(2):54-56. LI M, ZHANG Z G, ZHONG W H, et al. Study of electron beam curing resins[J]. Acta Materiae Compositae Sinica, 2001, 18(2):54-56(in Chinese).
[10]	杨明成, 钟磊, 朱德荣, 等. γ射线辐射对CF-PTFE/PA6复合材料性能的影响[J]. 复合材料学报, 2011, 28(4):7-11. YANG M C, ZHONG L, ZHU D R, et al. γ-ray radiation effect on properties of CF-PTFE/PA6 composities[J]. Acta Materiae Compositae Sinica, 2011, 28(4):7-11(in Chinese).
[11]	EVORA M C, MACHADO L D B, LOURENCO V L, et al. Thermal analysis of ionizing radiation effects on recycled polyamide-6[J]. Journal of Thermal Analysis and Calorimetry, 2002, 67(2):327-333.
[12]	PRAMANIK N K, HALDAR R, NIYOGI U K, et al. Effect of electron beam irradiation on the kinetics of non-isothermal crystallization of nylon 66[J]. Journal of Macromolecular Science, Part A, 2014, 51(4):296-307.
[13]	GUPTA S K, SINGH P, KUMAR R. Modifications induced by gamma irradiation upon structural optical and chemical properties of polyamide nylon-6, 6 polymer[J]. Radiation Effects and Defects in Solids, 2014, 169(8):679-685.
[14]	中国国家标准化管理委员会. 塑料拉伸性能的测定:GB/T 1040-2006[S]. 北京:中国标准出版社, 2006. Standardization Administration of the People's Republic of China. Plastics-Determination of tensile properties:GB/T 1040-2006[S]. Beijing:China Standards Press, 2006(in Chinese).
[15]	中国国家标准化管理委员会. 塑料弯曲性能的测定:GB/T 9341-2008[S]. 北京:中国标准出版社, 2008. Standardization Administration of the People's Republic of China. Plastics-Determination of flexural properties:GB/T 9341-2008[S]. Beijing:China Standards Press, 2008(in Chinese).
[16]	中国国家标准化管理委员会. 塑料悬臂梁冲击强度的测定:GB/T 1843-2008[S]. 北京:中国标准出版社, 2008. Standardization Administration of the People's Republic of China. Plastics-Determination of izod impact strength:GB/T 1843-2008[S]. Beijing:China Standards Press, 2008(in Chinese).
[17]	李积迁, 何和智. 尼龙6改性研究进展[J]. 塑料科技, 2009, 37(6):82-86. LI J Q, HE H Z. Research progress on modification of nylon 6[J]. Plastics Science and Technology, 2009, 37(6):82-86(in Chinese).
[18]	罗毅, 肖勤莎. 改性尼龙6工程塑料的现状和发展趋势[J]. 中国塑料, 1998, 12(5):9-15. LUO Y, XIAO Q S. Current status and development trends of modified nylon 6 engineering plastics[J]. China Plastics, 1998, 12(5):9-15(in Chinese).
[19]	中国国家标准化管理委员会. 塑料吸水性测试方法:GB/T 1034-1998[S]. 北京:中国标准出版社, 1998. Standardization Administration of the People's Republic of China. Plastics-Determination of water absorption:GB/T 1034-1998[S]. Beijing:China Standards Press, 1998(in Chinese).

Full-Text