|
|
- 2017
粉煤灰微珠含量与粒径级配比对环氧树脂基复合材料弯曲性能的影响
|
Abstract:
对粉煤灰空心微珠/环氧树脂复合材料进行了弯曲试验，研究了微珠粒径、含量以及级配比例对复合材料弯曲性能的影响，并通过弯曲断口微观形貌分析了内在机理。结果表明，空心微珠的加入对粉煤灰空心微珠/环氧树脂复合材料的弯曲强度影响很大。随空心微珠含量的增加，复合材料的弯曲强度呈现先升高后下降的趋势，填充量为15wt%时，复合材料的弯曲强度最大；随空心微珠粒径的减小，复合材料的弯曲强度随之提高，小粒径微珠对环氧树脂复合材料弯曲强度的提升效果更好；空心微珠级配填充环氧树脂复合材料的弯曲强度主要受级配微珠中小粒径微珠含量的影响，小粒径微珠的比例越大，弯曲强度越高。 By the flexural test of fly ash cenospheres (FACs)/epoxy resin composites,the effect of cenospheres content,particle size and grading ratios on flexural properties of the cenospheres/epoxy resin composites were studied,and the flexural mechanism was analyzed through the flexural fracture morphology.The results show that the addition of cenospheres significantly affects the flexural strength of cenospheres/epoxy composites.With the increase of cenospheres content,the flexural strength of the composites increases first and then decreases and it reaches the maximum when the content of cenospheres is about 15wt%.With the decrease of particle size of the cenospheres,the flexural strength of cenospheres/epoxy composites increases.The smaller size of cenospheres is more benefical to improve the flexural strength of composites.So the flexural strength of composites filled with grading cenospheres is mainly affected by small particle content in grading cenospheres,and with the larger proportion of small size cenospheres,the higher flexural strength of cenospheres/epoxy resin composites can be obtained. 国家自然科学基金（51305023）
| [1] | 宋建斌, 黄彪, 袁全平, 等. 适量木炭粉改善环氧树脂复合材料热/力学性能[J]. 农业工程学报, 2015, 31(14):310-314. SONG J B, HUANG B, YUAN Q P, et al. Suitable charcoal loadings improving heat-resistance andmechanicalproperties of epoxy resins composites[J]. Transactions of the Chinese Society of Agricultural Engineering, 2015, 31(14):310-314(in Chinese). |
| [2] | SUN T, Fan H Y, WANG Z, et al. Modified nanoFe2O3-epoxy composite with enhanced mechanical properties[J]. Materials and Design, 2015, 87(8):10-16. |
| [3] | DELUCCHI M, RICOTTI R, CERISOLAG. Influence of micro-and nano-fillers on chemico-physical properties of epoxy-based materials[J]. Progress in Organic Coatings, 2011, 72(1-2):58-64. |
| [4] | 田爱平, 余为, 李东杰. 泡沫铝-空心玻璃微珠/环氧泡沫复合材料压缩及弯曲力学性能[J]. 复合材料学报, 2013, 30(4):74-81. TIAN A P, YU W, LI D J. Compressive and flexural mechanical properties of foam Al-HGM/epoxy foam composites[J]. Acta Materiae Compositae Sinica, 2013, 30(4):74-81(in Chinese). |
| [5] | 余为, 李慧剑, 何长军, 等. 空心玻璃微珠填充环氧树脂复合材料力学性能[J]. 复合材料学报, 2010, 27(4):189-194. YU W, LI H J, HE C J, et al. Mechanical properties of epoxy resin filled with hollow glass bead[J]. Acta Materiae Compositae Sinica, 2010, 27(4):189-194(in Chinese). |
| [6] | YU M, ZHU P, MA Y Q. Experimental study and numerical prediction of tensile strength propertiesand failure modes of hollow spheres filled syntactic foams[J]. Computational Materials Science, 2012, 63:232-243. |
| [7] | 陈卓, 黄志雄, 秦岩, 等. 空心微球/环氧树脂复合泡沫塑料的抗压性能与破坏机制[J]. 复合材料学报, 2013, 30(2):31-36. CHEN Z, HUANG Z X, QIN Y, et al. Compressive property of hollow glass micosphere/epoxy resin syntactic foam and its fracture mechanism[J]. Acta Materiae Compositae Sinica, 2013, 30(2):31-36(in Chinese). |
| [8] | 中国国家标准化管理委员会. GB/T 9341-2008塑料弯曲性能的测定[S]. 北京:中国标准出版社, 2008. Standardization Administration of China. GB/T 9341-2008 Plastic-Determination of flexural properties[S]. Beijing:Standards Press of China, 2008(in Chinese). |
| [9] | 王春齐, 江大志, 肖加余. 纳米SiO2改性环氧树脂及其复合材料性能研究[J]. 功能材料, 2012, 43(22):3045-3048. WANG C Q, JIANG D Z, XIAO J Y. Study of nano-SiO2 on properties of epoxy resin and its glass fiber reinforced composites materials[J]. Journal of Functional Materials, 2012, 43(22):3045-3048(in Chinese). |
| [10] | GUO L Y, WANG L Y, Su X. Research progress of new methods for toughening epoxy resin[J]. Advanced Materials Research, 2012, 490-495:3598-3602. |
| [11] | 徐曼, 曹晓珑, 俞秉丽. 纳米SiO2/环氧树脂复合体系性能研究Ⅱ:复合材料的介电特性和力学特性[J]. 高分子材料科学与工程, 2005, 21(1):156-159. XU M, CAO X L, YU B L. Study On Properties of nono-SiO2/epoxy resin composite Ⅱ:electrical and mechanical properties[J]. Polymer Materials Science and Engineering, 2005, 21(1):156-159. (in Chinese). |
| [12] | ASIF A, RAO V L, NINAN K N. Nanoclay reinforced thermoplastic toughened epoxy hybrid syntactic foam:Surface morphology, mechanical and thermo mechanical properties[J]. Materials Science and Engineering A, 2010, 527(23):6184-6192. |
| [13] | FERREIRA J A M, CAPELA C, COSTA J D. A study of the mechanical behaviour on fibre reinforced hollow microspheres hybrid composites[J]. Composites Part A, 2010, 41(3):345-352. |
| [14] | LIU S L, FAN X H, HE C B. Improving the fracture toughness of epoxy with nanosilica-rubber core-shell nanoparticles[J]. Composites Science and Technology, 2016, 125:132-140. |
| [15] | 卢子兴, 石上路, 邹波, 等. 环氧树脂复合泡沫材料的压缩力学性能[J]. 复合材料学报, 2005, 22(4):17-22. LU Z X, SHI S L, ZOU B, et al. Compressive behavior of epoxy syntactic foam[J]. Acta Materiae Compositae Sinica, 2005, 22(4):17-22(in Chinese). |
| [16] | 孙春宝, 邢奕, 王啟锋. 空心玻璃微珠填充聚合物合成深海高强浮力材料[J]. 北京科技大学学报, 2006, 28(6):554-558. SUN C B, XING Y, WANG Q F. High-strength deep-sea buoyancy material made of polymer filled with hollow glass micro-beads[J]. Journal of University of Science and Technology Beijing, 2006, 28(6):554-558(in Chinese). |
| [17] | 林碧兰, 路新瀛, 陈勤. 空心微珠/环氧树脂高强浮力材料的性能及断裂分析[J]. 复合材料学报, 2011, 28(3):6-12. LIN B L, LU X Y, CHEN Q. Performance and fracture of hollow glass microsphere/epoxy resinhigh-strength buoyancy material[J]. Acta Materiae Compositae Sinica, 2011, 28(3):6-12(in Chinese). |
