纤维增强树脂基复合材料拼接结构拉伸性能
Tensile properties of fiber reinforced epexy resin composite with ply splice structures

DOI: 10.13801/j.cnki.fhclxb.20170307.003

Keywords: 纤维增强树脂基复合材料,拼接结构,力学性能,破坏模式,应力集中,有限元分析
fiber reinforced epoxy resin composites,ply splice,mechanical property,fracture mode,stress concentration,FEM

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	AL-ZUBAIDY H, AL-MAHAIDI R, ZHAO X L. Experimental investigation of bond characteristics between CFRP fabrics and steel plate joints under impact tensile loads[J]. Composite Structures, 2012, 94(2):510-518.
[2]	惠嘉, 万小朋, 赵美英. 复合材料胶接强度分析[J]. 机械制造, 2012, 50(575):71-75. HUI J, WANG X P, ZHAO M Y. Strength analysis of glue joints for composites[J]. Machinery, 2012, 50(575):71-75(in Chinese).
[3]	BROWN J. Thermoelastic stress analysis of overlap shear splices constructed from wet lay-up FRP composites[J]. Proceedings of SPIE-The International Society for Optical Engineering, 2011, 8013:801315.
[4]	ADAMS R D, PEPPIATT N A. Stress analysis of adhesive-bonded lap joints[J]. The Journal of Strain Analysis for Engineering Design, 1974, 9(3):185-196.
[5]	杜善义. 先进复合材料与航空航天[J]. 复合材料学报, 2007, 24(1):1-12. DU S Y. Study of advanced composite materials and aerospace engineering[J]. Acta Materiae Compositae Sinica, 2007, 24(1):1-12(in Chinese).
[6]	王强, 贾普荣, 王文贵, 等. 铺层拼接层合板抗拉强度研究[J]. 科学技术与工程, 2008, 8(11):2874-2877. WANG Q, JIA P R, WANG W G, et al. Study of tension strength for the laminate with ply splice[J]. Science Technology and Engineering, 2008, 8(11):2874-2877(in Chinese).
[7]	李亮, 贾普荣, 矫桂琼, 等. 含铺层拼接层合板的力学性能[J]. 航空制造技术, 2009(S1):126-128. LI L, JIA P R, JIAO G Q, et al. Mechanical property of laminate with ply splice[J]. Aeronautical Manufacturing Technology, 2009(S1):126-128(in Chinese).
[8]	王建业, 贾普荣, 矫桂琼, 等. 含铺层拼接层合板的等效刚度估算[J]. 科学技术与工程, 2010, 10(3):822-825. WANG J Y, JIA P R, JIAO G Q, et al. Equivalent rigidity estimation of the laminate with ply splice[J]. Science Technology and Engineering, 2010, 10(3):822-825(in Chinese).
[9]	王玲, 贾普荣, 王文贵, 等. 含铺层拼接层合板面内剪切强度[J]. 材料科学与工程, 2010, 28(3):341-344. WANG L, JIA P R, WANG W G, et al. In-plane shear strength of laminate with spliced plies[J]. Journal of Materials Science and Engineering, 2010, 28(3):341-344(in Chinese).
[10]	沈观林, 胡更开. 复合材料力学[M]. 北京:清华大学出版社, 2006. SHEN G L, HU G K. Composite mechanics[M]. Beijing:Tsinghua University Press, 2006(in Chinese).
[11]	KHAN B, POTTER K, WISNOM M R. Suppression of delamination at ply drops in tapered composites by ply chamfering[J]. Journal of Composite Materials, 2006, 40(2):157-174.
[12]	GLEICH D M, VAN-TOOREN M J L, BEUKERS A. Analysis and evaluation of bondline thickness effects on failure load in adhesively bonded structures[J]. Journal of Adhesion Science and Technology, 2001, 15(9):1091-1101.
[13]	FAWZIA S, AL-MAHAIDI R, ZHAO X L. Experimental and finite element analysis of a double strap joint between steel plates and normal modulus CFRP[J]. Composite Structures, 2006, 75(1-4):156-162.
[14]	FAWZIA S, ZHAO X L, AL-MAHAIDI R, et al. Bond characteristics between CFRP and steel plates in double strap joints[J]. International Journal of Advanced Steel Construction, 2005, 1(2):17-27.
[15]	CHEN D, ARAKAWA K, JIANG S. Novel joints developed from partially un-moulded carbon-fibre-reinforced laminates[J]. Journal of Composite Materials, 2015, 49(14):1777-1786.
[16]	CHEN D, LU F, JIANG B. Tensile properties of a carbon fiber 2D woven reinforced polymer matrix composite in through-thickness direction[J]. Journal of Composite Materials, 2012, 46(26):3297-3309.
[17]	黄剑贤, 耿小亮, 张永久, 等. 错位铺层拼接层合板承载机制的试验与模拟研究[J]. 应用力学学报, 2013, 30(5):787-791. HUANG J X, GEN X L, ZHANG J Y, et al. Experimental and FEM study on bearing mechanism of spliced ply with misalignment seams[J]. Chinese Journal of Applied Mechanics, 2013, 30(5):787-791(in Chinese).
[18]	CASTAGNETTI D, SPAGGIARI A, DRAGONI E. Effect of bondline thickness on the static strength of structural adhesives under nearly-homogeneous shear stresses[J]. The Journal of Adhesion, 2011, 87(7-8):780-803.
[19]	TANG J H, SRIDHAR I, SRIKANTH N. Static and fatigue failure analysis of adhesively bonded thick composite single lap joints[J]. Composites Science and Technology, 2013, 86:18-25.
[20]	LAKSHMI P R, REDDY P R. Investigation of interlaminar shear strength in carbon epoxy and carbon epoxy carbon nanotubes using experimental and finite element technique[J]. International Journal of Engineering Research and Applications, 2012, 2(3):1-10.

Full-Text