碳纤维水性杂化上浆剂的制备及其上浆后力学性能
Preparation and sizing performance of carbon fiber aqueous hybrid sizing agent

DOI: 10.13801/j.cnki.fhclxb.20161220.001

Keywords: 碳纤维,水性上浆剂,表面改性,单丝拉伸强度,界面剪切强度
carbon fiber,aqueous sizing agent,surface modification,monofilament tensile strength,interfacial shear strength

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	沈曾民. 新型碳材料[M]. 北京: 化学工业出版社, 2002, 54-60. SHEN Z M. New carbon materials [M]. Beijing: Chemical Industry Press, 2002, 54-60 (in Chinese).
[2]	LIU L, JIA C, HE J, et al. Interfacial characterization, control and modification of carbon fiber reinforced polymer composites[J]. Composites Science and Technology, 2015, 121: 56-72.
[3]	YUAN H, ZHANG S, LU C, et al. Improved interfacial adhesion in carbon fiber/polyether sulfone composites through an organic solvent-free polyamic acid sizing[J]. Applied Surface Science, 2013, 279(32): 279-284.
[4]	CHEN J, ZHU Y, NI Q, et al. Surface modification and characterization of aramid fibers with hybrid coating[J]. Applied Surface Science, 2014, 321(321): 103-108.
[5]	YI J W, LEE W, SEONG D G, et al. Effect of phenoxy-based coating resin for reinforcing pitch carbon fibers on the interlaminar shear strength of PA6 composites[J]. Compo-sites Part A: Applied Science and Manufacturing, 2016, 87: 212-219.
[6]	HE H, LI K, GAO F. Improvement of the bonding between carbon fibers and an epoxy matrix using a simple sizing process with a novolac resin[J]. Construction and Building Materials, 2016, 116: 87-92.
[7]	CHUNG M H, WANG W H, CHEN L M, et al. Silane modification on mesoporous silica coated carbon nanotubes for improving compatibility and dispersity in epoxy matrices[J]. Composites Part A: Applied Science and Manufacturing, 2015, 78: 1-9.
[8]	岑浩, 杨洪斌, 傅雅琴. 硅溶胶改性碳纤维对碳纤维/环氧树脂复合材料界面性能影响[J]. 复合材料学报, 2012, 29(6): 1-3. CEN H, YANG H B, FU Y Q, et al. Effect of silica sol modified carbon fiber on the interfacial properties of carbon fiber/epoxy resin composites[J]. Acta Materiae Compositae Sinica, 2012, 29(6): 1-3 (in Chinese).
[9]	WANG C, JI X, ROY A, et al. Shear strength and fracture toughness of carbon fibre/epoxy interface: Effect of surface treatment[J]. Materials & Design, 2015, 85: 800-807.
[10]	GE H, LI S, LIU H, et al. Preparation and properties of water-soluble-type sizing agents for carbon fibers[J]. Journal of Applied Polymer Science, 2014, 131(3): 1082-1090.
[11]	KARGER-KOCSIS J, MAHMOOD H, PEGORETTI A. Recent advances in fiber/matrix interphase engineering for polymer composites[J]. Progress in Materials Science, 2015, 73(1): 1-43.
[12]	YU B, JIANG Z, TANG X Z, et al. Enhanced interphase between epoxy matrix and carbon fiber with carbon nanotube-modified silane coating[J]. Composites Science and Technology, 2014, 99(4): 131-140.
[13]	水兴瑶, 刘猛, 朱曜峰, 等. 水性上浆剂对碳纤维表面及碳纤维/环氧树脂复合材料界面性能的影响[J]. 复合材料学报, 2016, 33(2): 273-279. SHUI X Y, LIU M, ZHU Y F, et al. Effect of water-based sizing agent on the interfacial properties of carbon fiber and carbon fiber/epoxy composites[J]. Acta Materiae Compositae Sinica, 2016, 33 (2): 273-279 (in Chinese).
[14]	YUAN H, LU C, ZHANG S, et al. Preparation and characterization of a polyimide coating on the surface of carbon fibers[J]. New Carbon Materials, 2015, 30(2): 115-121.
[15]	贺福, 王淑芳, 杨永岗. 用韦氏理论评价碳纤维抗拉强度的分散性[J]. 高科技纤维与应用, 2001, 26(3): 29-31. HE F, WANG S F, YANG Y G. Evaluation of dispersion of tensile strength of carbon fiber by Wechsler theory[J]. Hi-Tech Fiber & Application, 2001, 26(3): 29-31 (in Chinese).
[16]	KANT M, PENUMADU D. Dynamic mechanical characterization for nonlinear behavior of single carbon fibers[J]. Composites Part A: Applied Science and Manufacturing, 2014, 66(66): 201-208.
[17]	李学梅, 王继辉, 高国强. 单纤维复合材料断裂实验表征界面研究[J]. 武汉理工大学学报, 2005, 27(4): 9-12. LI X M, WANG J H, GAO G Q. Interfacial study on fracture characterization of single fiber composites[J]. Journal of Wuhan University of Technology-Materials, 2005, 27(4): 9-12 (in Chinese).
[18]	贺福. 碳纤维及石墨纤维[M]. 北京: 化学工业出版社, 2010, 316-317. HE F. Carbon fiber and graphite fiber [M]. Beijing: Chemical Industry Press, 2010, 316-317 (in Chinese).
[19]	邱海飞.复合材料制综框力学性能参数化仿真研究[J]. 丝绸, 2016, 53(4): 35-40. QIU H F. Parametric simulation research of mechanical property for heald frame designed with composite material[J]. Journal of Silk, 2016, 53(4): 35-40 (in Chinese).
[20]	ZHU Y, BAKIS C E, ADAIR J H. Effects of carbon nanofiller functionalization and distribution on interlaminar fracture toughness of multi-scale reinforced polymer composites[J]. Carbon, 2012, 50(3): 1316-1331.
[21]	YUAN H, ZHANG S, LU C. Surface modification of carbon fibers by a polyether sulfone emulsion sizing for increased interfacial adhesion with polyether sulfone[J]. Applied Surface Science, 2014, 317: 737-744.
[22]	ZHANG R L, HUANG Y D, LIU L, et al. Effect of the molecular weight of sizing agent on the surface of carbon fibers and interface of its composites[J]. Applied Surface Science, 2011, 257(8): 3519-3523.

Full-Text