|
|
- 2018
车用ABS温相关本构模型及材料参数的确定
|
Abstract:
通过不同温度下（243 K、263 K、296 K、333 K、353 K和383 K）的单向拉伸试验，研究了温度对玻璃态和玻璃化转变区的丙烯腈-丁二烯-苯乙烯三元共聚物（ABS）力学性能的影响。结果表明：在低于玻璃化转变温度（383 K）的范围内，屈服强度和极限拉伸强度随温度的升高呈线性下降；杨氏模量随温度的上升呈非线性下降。本文结合双层黏塑性本构模型，利用sim-flow优化工具获取本构模型在不同温度下的材料参数，建立了温相关双层黏塑性本构模型，该本构模型可以很好地预测ABS在243~383 K范围内的应力-应变曲线。 An experimental study of temperature-dependent mechanical behavior of acrylonitrile butadiene styrene (ABS) was performed at a range of temperatures (243 K, 263 K, 296 K, 333 K, 353 K, 383 K) under uniaxial tension condition. In this temperature range, ABS was in the glass state and glass transition region. The results show that the yield stress and ultimate tensile stress decrease linearly but Young's modulus decreases nonlinearly with the increase of temperature. The material parameters of the model at different temperature were obtained by using a sim-flow optimization tool. The temperature-dependent two-layer viscoplasticity constitutive model was established. This constitutive model can predict the stress-strain curve of ABS well at different temperatures between 243 K and 383 K. 国家自然科学基金（11472165）
| [1] | 张光涛. 高性能ABS树脂研究与开发[D]. 大庆:东北石油大学, 2015. ZHANG Guangtao. Research and development of high behaviour ABS resin[D]. Daqing:Northeast Petroleum University, 2015(in Chinese). |
| [2] | 蒋纪国, 王奇, 毛春屏. 我国ABS树脂生产现状及发展趋势[J]. 石油化工技术与经济, 2009, 25(2):1-5. JIANG Jiguo, WANG Qi, MAO Chunping. Chinese production situation of ABS resin and its development trend[J]. Technology & Economics in Petrochemicals, 2009, 25(2):1-5(in Chinese). |
| [3] | 于杰, 金志浩, 周惠久, 等. 温度对ABS塑料冲击行为的影响[J]. 贵州科学, 1994(1):50-55. YU Jie, JIN Zhihao, ZHOU Huijiu, et al. Effects of temperature on impact fracture behaviour of ABS plastics[J]. Guizhou Science, 1994(1):50-55(in Chinese). |
| [4] | 王彩华, 李慧剑, 余为, 等. 颗粒增强环氧树脂复合材料的动态力学性能[J]. 复合材料学报, 2018, 35(5):1105-1113. WANG Caihua, LI Huijian, YU Wei, et al. Dynamic mechanical properties analysis of particle reinforced epoxy resin composite[J]. Acta Materiae Compositae Sinica, 2018, 35(5):1105-1113(in Chinese). |
| [5] | GUO Z S, FENG J M, WANG H, et al. A new temperature-dependent modulus model of glass/epoxy composite at elevated temperatures[J]. Journal of Composite Materials, 2013, 47(26):3303-3310. |
| [6] | TJONG S C, JIANG W. Mechanical and thermal behavior of poly (acrylonitrile butadiene styrene)/polycarbonate blends reinforced with potassium titanate whiskers[J]. Polymer Composites, 1999, 20(6):748-757. |
| [7] | HART K R, WETZEL E D. Fracture behavior of additively manufactured acrylonitrile butadiene styrene(ABS) materials[J]. Engineering Fracture Mechanics, 2017, 177:1-13. |
| [8] | 金范龙, 陆书来, 张溯燕, 等. 微观结构与ABS产品性能的关系(Ⅰ)ABS树脂的形态结构及力学性能[J]. 弹性体, 2010, 20(4):55-63. JIN Fanlong, LU Shulai, ZHANG Suyan, et al. Effect of microstructure on property of ABS resin(Ⅰ)morphology and mechanical property of ABS resins[J]. China Elastomerics, 2010, 20(4):55-63(in Chinese). |
| [9] | 张皓瑜, 陈长江, 张维广, 等. 高耐热型改性ABS树脂及其在汽车上的应用[J]. 工程塑料应用, 1996, 24(3):29-30. ZHANG Haoyu, CHEN Changjiang, ZHANG Weiguang, et al. High heat-resistant modified ABS and its application in automobiles[J]. Engineering Plastics Application, 1996, 24(3):29-30(in Chinese). |
| [10] | AN T, SELVARAJ R, HONG S, et al. Creep behavior of ABS polymer in temperature-humidity conditions[J]. Journal of Materials Engineering and Performance, 2017, 26(6):2754-2762. |
| [11] | ABDEL-WAHAB A A, ATAYA S, SILBERSCHMIDT V V. Temperature-dependent mechanical behaviour of PMMA:Experimental analysis and modelling[J]. Polymer Testing, 2017, 58:86-95. |
| [12] | ISO. Plastics determination of tensile properties:Part 1-General principles:ISO 527-1[S]. ISO, 2012. |
| [13] | ABAQUS. ABAQUS documentation[M]. Providence:Dassault Systemes, 2013. |
| [14] | KANG J J, BECKER A A, SUN W. Determination of elastic and viscoplastic material properties obtained from indentation tests using a combined finite element analysis and optimization approach[J]. Proceedings of the Institution of Mechanical Engineers:Part L-Journal of Materials:Design and Applications, 2015, 229(3):175-188. |
| [15] | SYSTMES D. SIMULIA isight 2016 user's guide[M]. Centre Green Way Suite:Engieous Software Company, 2016. |
| [16] | LE-GAC P Y, ARHANT M, LE GALL M, et al. Yield stress changes induced by water in polyamide 6:Characterization and modeling[J]. Polymer Degradation and Stability, 2017, 137:272-280. |
| [17] | 朱锡雄, 朱国瑞, 黄旭升, 等. 玻璃态高聚物PMMA的应变软化-强化效应[J]. 高分子材料科学与工程, 1992(2):1-9. ZHU Xixiong, ZHU Guorui, HUANG Xusheng, et al. The strain softing and hardening effects of glassy polymer PMMA[J]. Polymeric Materials Science & Engineering, 1992(2):1-9(in Chinese). |
| [18] | 朱锡雄, 朱国瑞, 黄旭升, 等. 玻璃态高聚物PMMA的非线性黏弹-塑性本构方程[J]. 力学学报, 1993(1):103-110. ZHU Xixiong, ZHU Guorui, HUANG Xusheng, et al. A non-linear viscoelastic-plastic constitutive model for glassy polymer PMMA[J]. Acta Mechanica Sinica, 1993(1):103-110(in Chinese). |
| [19] | 侯珍秀, 李玉梅, 张楠, 等. 聚碳酸酯板材中、低温本构模型的建立[J]. 哈尔滨工业大学学报, 2013, 45(11):38-44. HOU Zhenxiu, LI Yumei, ZHANG Nan, et al. The establishment of the constitutive equation of polycarbonate at low and medium temperature[J]. Jounal of Habin Institute of Technology, 2013, 45(11):38-44(in Chinese). |
| [20] | SOLASI R, ZOU Y, HUANG X, et al. A time and hydration dependent viscoplastic model for polyelectrolyte membranes in fuel cells[J]. Mechanics of Time-Dependent Materials, 2008, 12(1):15-30. |
| [21] | YIN Z N, WANG T J. Deformation of PC/ABS alloys at elevated temperatures and high strain rates[J]. Materials Science and Engineering A, 2008, 494(1):304-313. |
| [22] | AGNELLI S, BALDI F, RICCO T. The load separation criterion in elastic-plastic fracture mechanics:Rate and temperature dependence of the material plastic deformation function in an ABS resin[C]//AIP Conference Proceedings, AIP, 2012, 1459(1):114-116. |
