固相剪切碾磨对Al/低密度聚乙烯导热复合材料结构与性能的影响
Effect of solid-state shear milling on the structures and properties of thermally conductive Al/LLDPE composites

DOI: 10.13801/j.cnki.fhclxb.20160523.008

Keywords: 固相剪切碾磨,聚乙烯,铝粉,微观结构,热性能,热导率,力学性能
solid state shear milling,polyethylene,aluminum,microstructure,thermal properties,thermal conductivity,mechanical properties

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	KUMLUTAS D, TAVMAN I H, COBAN M T. Thermal conductivity of particle filled polyethylene composite materials[J]. Composites and Science Technology, 2003, 63(1):113-117.
[2]	ZHOU W. Thermal and dielectric properties of the aluminum particle reinforced linear low-density polyethylene composites[J]. Polymer Engineering and Science, 2011, 51(5):917-924.
[3]	WU H, SUN X, ZHANG W, et al. Effect of solid-state shear milling on the physicochemical properties of thermally conductive low-temperature expandable graphite/low-density polyethylene composites[J]. Composites Part A:Applied Science & Manufacturing, 2013, 55(6):27-34.
[4]	苏志忠, 方丽华, 林明穗,等. 改性炭黑对聚乳酸结晶的异相成核作用[J]. 石油化工, 2014, 43(3):331-336. SU Z Z,FANG L H,LIN M S, et al. Heterogeneous nucleation effect of modified carbon black on polylactic acid crystallization[J]. Petrochemical Technology, 2014, 43(3):331-336(in Chinese).
[5]	ZHOU S, YU L, SONG X, et al. Preparation of highly thermally conducting polyamide 6/graphite composites via low-temperature in situ expansion[J]. Journal of Applied Polymer Science, 2014, 131(1):1-15.
[6]	WAKABAYASHI K, BRUNNER P J, MASUDA J, et al. Polypropylene-graphite nanocomposites made by solid-state shear pulverization:Effects of significantly exfoliated, unmodified graphite content on physical, mechanical and electrical properties[J]. Polymer, 2010, 51(23):5525-5531.
[7]	BHUIYAN M K H, RAHMAN M M, MINA M F, et al. Crystalline morphology and properties of multi-walled carbon nanotube filled isotactic polypropylene nanocomposites:Influence of filler size and loading[J]. Composites Part A:Applied Science & Manufacturing, 2013, 52(3):70-79.
[8]	HUANG X, KIM C, MA Z, et al. Correlation between rheological, electrical, and microstructure characteristics in polyethylene/aluminum nanocomposites[J]. Journal of Polymer Science Part B:Polymer Physics, 2008, 46(20):2143-2154.
[9]	KOTA A K, CIPRIANO B H, POWELL D, et al. Quantitative characterization of the formation of an interpenetrating phase composite in polystyrene from the percolation of multiwalled carbon nanotubes[J]. Nanotechnology, 2007, 18(50):505705-505707.
[10]	吴贺君, 卢灿辉, 胡彪, 等. 填充型聚乙烯基导热复合材料研究进展[J]. 塑料工业, 2016, 44(2):13-18. WU H J, LU C H, HU B, et al. Research progress of filled thermally conductive polyethylene-based composites[J]. China Plastics Industry, 2016, 44(2):13-18(in Chinese).
[11]	TAVMAN I H. Thermal and mechanical properties of aluminum powder-filled high-density polyethylene composites[J]. Journal of Applied Polymer Science 1996, 62(12):2161-2167.
[12]	涂文英, 张海燕, 林锦,等. 多层石墨/硅树脂导热复合材料的制备与性能[J]. 复合材料学报, 2013, 30(2):70-74. TU W Y, ZHANG H Y, LIN J, et al. Preparation and pro-perties of multilayer graphite/silicon resin thermal conductive materials[J]. Acta Materiae Compositae Sinica, 2011, 51(5):917-924(in Chinese).
[13]	TEKCE H S, KUMLUTAS D, TAVMAN I H. Effect of particle shape on thermal conductivity of copper reinforced polymer composites[J]. Journal of Reinforced Plastics & Composites, 2007, 26(1):113-121.
[14]	XU X, WANG Q, KONG X, et al. Pan mill type equipment designed for polymer stress reactions:Theoretical analysis of structure and milling process of equipment[J]. Plastics Rubber & Composites Processing & Applications, 1996, 25:152-158.
[15]	LU C, WANG Q. Preparation of ultrafine polypropylene/iron composite powders through pan-milling[J]. Journal of Materials Processing Technology, 2004, 145(3):336-344.
[16]	中华人民共和国国家质量监督检验检疫总局. 塑料拉伸性能试验方法:GB/T 1040-2006[S]. 北京:中国标准出版社,2006. General Administration of Quality Supervision, Inspection and Quarantine of the people's Republic of China. Plastics-Determination of tensile properties:GB/T 1040-2006[S]. Beijing:Standards Press of China, 2006(in Chinese).
[17]	中华人民共和国国家质量监督检验检疫总局. 塑料弯曲性能试验方法:GB/T 9341-2010[S]. 北京:中国标准出版社,2008. General Administration of Quality Supervision, Inspection and Quarantine of the people's Republic of China. Plastics-Determination of flexural properties:GB/T 9341-2010[S]. Beijing:Standards Press of China, 2008(in Chinese).
[18]	HUANG H. Structure development and property changes in high density polyethylene during pan-milling[J]. Journal of Applied Polymer Science, 2000, 78(11):2016-2024.
[19]	LUYT A S, MOLEFI J A, KRUMP H. Thermal, mechanical and electrical properties of copper powder filled low-density and linear low-density polyethylene composites[J]. Polymer Degradation & Stability, 2006, 91(7):1629-1636.
[20]	XU Y, CHUNG D D L. Increasing the thermal conductivity of boron nitride and aluminum nitride particle epoxy-matrix composites by particle surface treatments[J]. Instrumentation Science & Technology, 2000, 7(4):243-256.
[21]	HAN Z, FINA A. Thermal conductivity of carbon nanotubes and their polymer nanocomposites:A review[J]. Progress in Polymer Science, 2011, 36(7):914-944.
[22]	刘加奇, 张立群, 杨海波,等. 粒子填充聚合物基复合材料导热性能的数值模拟[J]. 复合材料学报, 2009, 26(1):36-42. LIU J Q, ZHANG L Q, YANG H B, et al. Numerical investigation of the thermal property of particle filled polymer matrix composite[J]. Acta Materiae Compositae Sinica, 2009, 26(1):36-42(in Chinese).
[23]	舒畅,谢光荣,曾鹏. 不同球磨介质在片状铝粉制备过程中的作用研究[J]. 粉末冶金工业,2010,20(4):10-14. SHU C, XIE G R, ZENG P. The effects of different ball milling mediums on the fabrication of aluminum flake powder[J]. Powder Metallurgy Industry, 2010, 20(4):10-14(in Chinese).
[24]	GU J, GUO Y, LV Z, et al. Highly thermally conductive POSS-g-SiCp/UHMWPE composites with excellent dielectric properties and thermal stabilities[J]. Composites Part A:Applied Science & Manufacturing, 2015, 78:95-101.
[25]	汪文, 丁宏亮, 张子宽,等. 石墨烯微片/聚丙烯导热复合材料的制备与性能[J]. 复合材料学报, 2013, 30(6):14-20. WANG W, DING H L, ZHANG Z K, et al. Preparation and properties of graphene nanoplatelets/PP thermal conductive composites[J]. Acta Materiae Compositae Sinica, 2013, 30(6):14-20(in Chinese).
[26]	MOLEFI J A, LUYT A S, KRUPA I. Comparison of the influence of copper micro-and nano-particles on the mechanical properties of polyethylene/copper composites[J]. Journal of Materials Science, 2010, 45(1):82-88.
[27]	李侃社, 张升炎, 牛红梅,等. 石墨在固相剪切碾磨力场下的片层剥离及与PVC的纳米复合[J]. 复合材料学报, 2013, 30(2):94-98. LI K, ZHANG S Y, NIU H M, et al. Exfoliating interlayer and nanocompositing of graphite with PVC through solid state shear compounding technology[J]. Acta Materiae Compositae Sinica, 2013, 30(2):94-98(in Chinese).
[28]	ZHANG S, KE Y, CAO X, et al. Effect of Al2O3 fibers on the thermal conductivity and mechanical properties of high density polyethylene with the absence and presence of compatibilizer[J]. Journal of Applied Polymer Science, 2011, 124(6):103-124.

Full-Text