|
|
- 2017
聚氨酯注浆材料在循环压缩加载下疲劳性能与微观结构演化
|
Abstract:
| [1] | 王复明,徐建国,杨柳,等. 堤坝高聚物防渗墙静力荷载试验与数值分析[J]. 建筑科学与工程学报, 2015(02):27-34. WANG F M, XU J G, YANG L, et al. Static load experiment and numerical analysis of polymer diaphragm wall of dam[J]. Journal of Architecture and Civil Engineering, 2015(2):27-34(in Chinese). |
| [2] | 边学成,程翀,王复明,等. 高速铁路路基沉降高聚物注浆修复后动力性能及长期耐久性的试验研究[J]. 岩土工程学报, 2014, 36(3):562-568. BIAN X C, CHENG C, WANG F M, et al. Experimental study on dynamic performance and long-term durability of high-speed railway subgrade rehabilitated by polymer injection technology[J]. Chinese Journal of Geotechnical Engineering, 2014, 36(3):562-568(in Chinese). |
| [3] | KANNY K, MAHFUZ H, CARLSSON L A, et al, Dynamic mechanical analyses and flexural fatigue of PVC foams[J]. Composite Structures, 2002, 58:175-183. |
| [4] | BEZAZI A, SCARPA F. Mechanical behaviour of conventional and negative Poisson's ratio thermoplastic polyurethane foams under compressive cyclic loading[J]. International Journal of Fatigue, 2007, 29(5):922-930. |
| [5] | 凌建明,吴征,叶定威,等. 压缩条件下发泡聚苯乙烯的本构关系和疲劳特性[J]. 同济大学学报, 2003, 31(1):21-25. LING J M, WU Z, YE D W, et al. Constitutive law and fatigue characteristics of expanded polystyrene under uniaxial compression[J]. Journal of Tongji University, 2003, 31(1):21-25(in Chinese). |
| [6] | 梁书恩. 聚氨酯泡沫塑料泡孔结构与力学性能关系的研究[D].绵阳:中国工程物理研究院,2005. LIANG S. Relationship between cellular structure and mechanical performance of polyurethane foam[D]. Mianyang:China Academy of Engineering Physics, 2005(in Chinese). |
| [7] | 肖建庄,李宏. 再生混凝土单轴受压疲劳性能[J]. 土木工程学报, 2013, 46(2):62-69. XIAO J Z,LI H. Investigation on the fatigue behavior of recycled aggregate concrete under uniaxial compression[J]. China Civil Engineering Journal, 2013, 46(2):62-69(in Chinese). |
| [8] | TOBUSHI H, HAYASHI S, KOJIMA S. Mechanical properties of shape memory polymer of polyurethane series:Basic characteristics of stress-strain-temperature relationship[J]. JSME International Journal. Series 1, Solid Mechanics, Strength of Materials, 1992, 35(3):296-302. |
| [9] | EVANS A G, HUTCHINSON J W, ASHBY M F. Multifunctionality of cellular metal systems[J]. Progress in Materials Science, 1998, 43(3):171-221. |
| [10] | 王建华,卢艾,周秋明,等. 高密度增强硬质聚氨酯泡沫塑料的复合泡体结构[J]. 中国塑料, 2001, 15(4):28-31. WANG J H,LU A,ZHOU Q M,et al. Composite bubble structure of high density reinforced rigid polyurethane foam[J]. China Plastics, 2001, 15(4):28-31(in Chinese). |
| [11] | SMITS G F. Effect of cellsize reduction on polyurethane foam physical properties[J]. Journal of Building Physics, 1994, 17(4):309-329. |
| [12] | RUSCH K C. Load-compression behavior of flexible foams[J]. Journal of Applied Polymer Science, 1969, 13(11):2297-2311. |
| [13] | 郭成超,王复明,钟燕辉. 水泥混凝土路面脱空高聚物注浆技术研究[J]. 公路, 2008(10):232-236. GUO C C, WAND F M, ZHONG Y H. Research on polymer grouting technology for cement concrete pavement void[J]. Highway, 2008(10):232-236(in Chinese). |
| [14] | 卢子兴,田常津,谢若泽. 硬质聚氨酯泡沫塑料压缩力学性能[J]. 材料研究学报, 1994(5):452-456. LU Z X, TIAN C J, XIE R Z. The compressed properties of polyurethane rigid (PUR) foam[J]. Chinese Journal of Materials Research, 1994(5):452-456(in Chinese). |
| [15] | 卢子兴,朱汪鲲,寇长河,等. 聚氨酯泡沫塑料的强度与断裂韧性[J]. 力学学报, 2000, 32(5):627-631. LU Z X,ZHU W K,KOU C H,et al. Investigation on the fracture properties of polythane rigid foam plastics[J]. Acta Mechanica Sinica, 2000, 32(5):627-631(in Chinese). |
| [16] | GIBSON L J,ASHBY M F. 多孔固体结构与性能[M]. 北京:清华大学出版社, 2003, 159-189. GIBSON L J,ASHBY M F. Cellular solids:structure and properties[M]. Beijing:Tsinghua university press, 2003:159-189(in Chinese). |
| [17] | HUANG J S, LIN J Y. Fatigue of cellular materials[J]. Acta Materialia, 1996, 44(1):289-296. |
