|
|
- 2017
POE-g-MA对纳米CaCO3/聚乳酸复合材料热及流变性能影响
|
Abstract:
以纳米碳酸钙（Nano-CaCO3）和聚乳酸（PLA）为原料，马来酸酐接枝乙烯-辛烯共聚物（POE-g-MA）为增容剂，利用熔融挤出热拉-骤冷工艺制备了一系列Nano-CaCO3/PLA复合材料。分别采用SEM、DSC、TG、毛细管流变仪（CR）和万能实验机研究了Nano-CaCO3/PLA复合材料的界面相容性、热性能、流变性能与力学性能。结果表明：与纯PLA相比，当Nano-CaCO3含量达到15wt%，Nano-CaCO3/PLA复合材料团聚现象明显，其结晶度、最大热分解温度与拉伸强度分别下降1.9%、15.5℃与28.2%，弯曲强度和断裂伸长率分别提高37.5%和29.3%，而相应添加4wt% POE-g-MA增容剂的Nano-CaCO3/PLA复合材料分散形态得到改善，其结晶度和拉伸强度分别下降4.2%和25.2%；最大热分解温度、弯曲强度和断裂伸长率分别提高5.8℃、25.3%和174.4%；同时POE-g-MA增加了Nano-CaCO3/PLA复合材料的剪切黏度。 The nanometer calcium carbonate (Nano-CaCO3)/polylactic acid (PLA) composites was melt-compounded by twin-screw exturder with Nano-CaCO3 and PLA as raw materials,maleic anhydride grafted ethylene-octene copolymer (POE-g-MA) as compatibilizer.SEM,DSC,TG,capillary rheometer (CR) and universal testing machine were used to perform the interfacial compatibility,thermal properties,rheological properties and mechanical properties of Nano-CaCO3/PLA matrix composites,respectively.The results show that the aggregation phenomenon in the PLA matrix increases compared with pure PLA when the content of Nano-CaCO3 increases to 15wt%.The crystallinity,the maximum thermal decomposition temperature and the tensile strength of Nano-CaCO3/PLA composites decrease by 1.9%,15.5℃ and 28.2%,the flexural strength and elongation at break increase by 37.5% and 29.3%,respectively.And the interfacial compatibility of Nano-CaCO3/PLA composites with 4wt% POE-g-MA improves,the crystallinity and the tensile strength of sample decrease by 4.2% and 25.2%,the maximum thermal decomposition temperature,the flexural strength and elongation at break of sample increase by 5.8℃,25.3% and 174.4%,respectively.The shear viscosity of Nano-CaCO3/PLA composites increases due to thaddition of POE-g-MA. 陕西省高校科协青年人才托举计划（203890022）；陕西省教育厅2015年重点科学研究计划（15JS017）
| [1] | 杨斌. 绿色塑料聚乳酸[M]. 北京:化学工业出版社, 2007:16-20. YANG B. Green plastics-PLA[M]. Beijing:Chemical Industry Press, 2007:16-20(in Chinese). |
| [2] | 钱伯章. 中国聚乳酸的开发与应用进展[J]. 精细石油化工进展, 2012, 5(13):53-58. QIAN B Z. Progress of development and application of poly (lactic acid) in China[J]. Advances in Fine Petrochemicals, 2012, 5(13):53-58(in Chinese). |
| [3] | 吕闪闪, 曹军, 谭海彦, 等. 木粉含量对木粉淀粉聚乳酸复合材料性能的影响[J]. 复合材料学报, 2015, 32(2):347-354. LV S S, CAO J, TAN H Y, et al. Effects of wood flour contents on performance of wood flour starch/poly(lactic acid) composites[J]. Acta Materiae Compositae Sinica, 2015, 32(2):347-354(in Chinese). |
| [4] | MARUBAYASHI H M, AKAISHI S, ASAI S, et al. Crystalline structure and morphology of PLA formed under high-pressure CO2[J]. Macromolecules, 2008, 41(23):9192-9203. |
| [5] | BORGES S, DIAS M L, PITA V J, et al. Water vapor permeability and tensile properties of poly(l-lacticacid)/synthetic mica nanocomposites prepared by melt blending[J]. Journal of Plastic Film and Sheeting, 2013, 29(2):112-126. |
| [6] | KIM M W, SONG Y S, YOUN J R. Effects of interfacial adhesion and crystallization on the thermoresistance of poly(lactic acid)/mica composites[J]. Composites Part A:Applied Science and Manufacturing, 2010, 41(12):1817-1822. |
| [7] | 胡建鹏, 郭明辉. 木质素磺酸铵对聚乳酸/木纤维可生物降解复合材料力学与热性能的影响[J]. 复合材料学报, 2015, 32(3):657-664. HU J P, GUO M H. Influence of ammonium lignosulphonate on mechanical and thermal properties of polylatic acid/wood fiber biodegradable composites[J]. Acta Materiae Composites Sinica, 2015, 32(3):657-664(in Chinese). |
| [8] | TSUJI H, TASHIRO K, BOUAPAO L, et al. Synchronous and separate homo-crystallization of enantiomeric poly(L-lactic acid)/poly(D-lactic acid) blends[J]. Polymer, 2012, 53(2):747-754. |
| [9] | CHEN Y H, MAO Y M, LI Z M, et al. Competitive growth of α-and β-Crystals in β-nucleated isotactic polypropylene under shear flow[J]. Macromolecules, 2010, 43(16):6760-6771. |
| [10] | 李春光, 徐鹏飞, 李云霞, 等. 玉米秸秆微晶纤维素/聚乳酸复合膜的制备与性能[J]. 复合料学报, 2011, 28(4):95-98. LI C G, XU P F, LI Y X, et al. Preparation and properties of corn stalks cellulose microcrystal reinforced poly(lacticacid) composite film[J]. Acta Materiae Compositae Sinica, 2011, 28(4):95-98. (in Chinese). |
| [11] | 梁多平, 智慧, 孙智慧, 等. 改性纳米HA对PLA-PBAT共混体系结晶与流变性能的影响[J]. 复合材料学报, 2014, 31(3):569-577. LIANG D P, ZHI H, SUN Z H, et al. Prediction of tensile strength of flax noil fibers reinforced biodegradable composite[J]. Acta Materiae Compositae Sinica, 2014, 31(3):569-577(in Chinese). |
| [12] | JIA S K, QU J P, ZHAI S F, et al. Effects of dynamic elongational flow on the dispersion and mechanical properties of low-density polyethylene/nanoprecipitated calcium carbo-nate composites[J]. Polymer Composites, 2014, 35(5):884-891. |
| [13] | 中华人民共和国国家质量监督检验检疫总局. GB/T1447-2005纤维增强塑料拉伸性能试验方法[S]. 北京:中国标准出版社, 2005. General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China. GB/T 1447-2005 Fiber reinforced plastics tensile properties[S]. Beijing:Standards Press of China, 2005(in Chinese). |
| [14] | 中华人民共和国国家质量监督检验检疫总局. GB/T9341-2000塑料弯曲性能试验方法[S]. 北京:中国标准出版社, 2000. General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China. GB/T9341-2000 Plastics-determination of flexural properties[S]. Beijing:Standards Press of China, 2000(in Chinese). |
| [15] | GU S Y, ZOU C Y, ZOU K, et al. Structure-rheology responses of polylactide/calcium carbonate composites[J]. Journal of Applied Polymer Science, 2013, 114(3):1648-1655. |
| [16] | GONG L, YIN B, LI L P, et al. The morphology and mechanical properties of PP/EPDM/nano-CaCO3 composites:Effect of initial mixing state[J]. Polymer Bulletin, 2013, 70(11):21-26. |
| [17] | 杨刚, 李怀栋, 窦强. 聚乳酸/乙烯-醋酸乙烯酯共聚物/碳酸钙复合材料的性能研究[J]. 中国塑料, 2011, 25(5):39-45. YANG G, LI H D, DOU Q. Study on the properties of poly(lacticacid)/ethylene vinyl acetate/calcium carbonate compo-sites[J]. China Plastics, 2011, 25(5):39-45(in Chinese). |
| [18] | 李成园, 周松, 刘志鹏, 等. POE和POE-g-MA对PA66复合材料结构和性能的影响[J]. 塑料助剂, 2013, (1):35-40. Li C Y, ZHOU S, LI Z P, et al. Effects of POE and POE-g-MA on the structure and properties of PA66 composites[J]. Plastics Additives, 2013, (1):35-40(in Chinese). |
| [19] | CHIU H T, CHUANG C Y. The mechanical and rheological behavior of the PA/TPU blend with POE-g-MA modifier[J]. Journal of Applied Polymer Science, 2013, 115(3):1278-1282. |
| [20] | LIANG J Z, TANG C Y, ZHOU L, et al. Melt flow behavior in capillary extrusion of nanosized calcium carbonate-filled poly(L-lactic acid) biocomposites[J]. Polymer Engineering and Science, 2012, 52(9):1839-1844. |
