双顶角钻头钻削CFRP复合材料的刀具磨损机制
Wear mechanism of double point angle drill bit in drilling CFRP composites

DOI: 10.13801/j.cnki.fhclxb.20160823.001

Keywords: 碳纤维增强树脂基复合材料,双顶角钻头,磨损机制,切削刃钝化,后刀面磨损
carbon fiber reinforced plastic (CFRP) composites,double point angle drill,wear mechanisms,cutting edge rounding,flank wear

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	XU J Y, AN Q L, CHEN M. A comparative evaluation of polycrystalline diamond drills in drilling high-strength T800S/250F CFRP[J]. Composite Structures, 2014, 117(1):71-82.
[2]	MERINO-PéREZ J L, MERSON E, AYVAR-SOBERANIS S, et al. The applicability of Taylor's model to the drilling of CFRP using uncoated WC-Co tools:The influence of cutting speed on tool wear[J]. International Journal of Machining and Machinability of Materials, 2014, 16(2):95-112.
[3]	RAWAT S, ATTIA H. Wear mechanisms and tool life management of WC-Co drills during dry high speed drilling of woven carbon fibre composites[J]. Wear, 2009, 267(5):1022-1030.
[4]	FEITO N, DíAZ-áLVAREZ J, DíAZ-áLVAREZ A, et al. Experimental analysis of the influence of drill point angle and wear on the drilling of woven CFRPs[J]. Materials, 2014, 7(6):4258-4271.
[5]	KWON D J, WANG Z J, GU G Y, et al. Comparison of optimum drilling conditions of aircraft CFRP composites using CVD and PCD drills[C]. 18th International Conference on Composite Materials. Korea, 2011.
[6]	SHYHA I, SOO S L, ASPINWALL D, et al. Effect of laminate configuration and feed rate on cutting performance when drilling holes in carbon fibre reinforced plastic compo-sites[J]. Journal of Materials Processing Technology, 2010, 210(8):1023-1034.
[7]	MAYUET P, GALLO A, PORTAL A, et al. Damaged area based study of the Break-IN and Break-OUT defects in the dry drilling of carbon fiber reinforced plastics (CFRP)[J]. Procedia Engineering, 2013, 63(81):743-751.
[8]	KARPAT Y, DE？ER B, BAHTIYAR O. Drilling thick fabric woven CFRP laminates with double point angle drills[J]. Journal of Materials Processing Technology, 2012, 212(10):2117-2127.
[9]	XIA T, KAYNAK Y, ARVIN C, et al. Cryogenic cooling-induced process performance and surface integrity in drilling CFRP composite material[J]. The International Journal of Advanced Manufacturing Technology, 2016, 82(1-4):605-616.
[10]	XU J Y, AN Q L, CAI X J, et al. Drilling machinability evaluation on new developed high-strength T800S/250F CFRP laminates[J]. International Journal of Precision Engineering and Manufacturing, 2013, 14(10):1687-1696.
[11]	WILLIAMS R A. A study of the drilling process[J]. Journal of Engineering for Industry, 1974, 96(4):1207-1215.
[12]	MADHAVAN V, LIPCZYNSKI G, LANE B, et al. Fiber orientation angle effects in machining of unidirectional CFRP laminated composites[J]. Journal of Manufacturing Processes, 2015, 20:431-442.
[13]	WYEN C F, KNAPP W, WEGENER K. A new method for the characterisation of rounded cutting edges[J]. The International Journal of Advanced Manufacturing Techno-logy, 2012, 59(9-12):899-914.
[14]	CHANDRASEKHARAN V, KAPOOR S G, DEVOR R E. A mechanistic approach to predicting the cutting forces in drilling:with application to fiber-reinforced composite materials[J]. Journal of Engineering for Industry, 1995, 117(4):559-570.
[15]	TETI R. Machining of composite materials[J]. CIRP Annals-Manufacturing Technology, 2002, 51(2):611-634.
[16]	LAZAR M B, XIROUCHAKIS P. Experimental analysis of drilling fiber reinforced composites[J]. International Journal of Machine Tools and Manufacture, 2011, 51(12):937-946.
[17]	LIU D F, TANG Y J, CONG W L. A review of mechanical drilling for composite laminates[J]. Composite Structures, 2012, 94(4):1265-1279.
[18]	ABRAO A M, FARIA P E, RUBIO J C C, et al. Drilling of fiber reinforced plastics:A review[J]. Journal of Materials Processing Technology, 2007, 186(1):1-7.
[19]	陈燕, 葛恩德, 傅玉灿, 等. 碳纤维增强树脂基复合材料制孔技术研究现状与展望[J]. 复合材料学报, 2015, 32(2):301-316. CHEN Y, GE E D, FU Y C, et al. Review and prospect of drilling technologies for carbon fiber reinforced polymer[J]. Acta Materiae Compositae Sinica, 2015, 32(2):301-316(in Chinese).
[20]	马立敏, 张嘉振, 岳广全, 等. 复合材料在新一代大型民用飞机中的应用[J]. 复合材料学报, 2015, 32(2):317-322. MA L M, ZHANG J Z, YUE G Q, et al. Application of composites in new generation of large civil aircraft[J]. Acta Materiae Compositae Sinica, 2015, 32(2):317-322(in Chinese).
[21]	徐锦泱, 蔡晓江, 魏莹莹, 等. 高强度型T800S/250F CFRP的制孔缺陷研究[J]. 制造技术与机床, 2013(3):97-101. XU J Y, CAI X J, WEI Y Y, et al. Defects study on drilling of high-strength T800S/250F CFRP laminates[J]. Manufacturing Technology & Machine Tool, 2013(3):97-101(in Chinese).
[22]	FARAZ A, BIERMANN D, WEINERT K. Cutting edge rounding:An innovative tool wear criterion in drilling CFRP composite laminates[J]. International Journal of Machine Tools and Manufacture, 2009, 49(15):1185-1196.
[23]	？ELIK A, LAZOGLU I, KARA A, et al. Wear on SiAlON ceramic tools in drilling of aerospace grade CFRP composites[J]. Wear, 2015, 338-339:11-21.
[24]	WANG X, KWON P Y, STURTEVANT C, et al. Tool wear of coated drills in drilling CFRP[J]. Journal of Manufacturing Processes, 2013, 15(1):127-135.
[25]	RAMIREZ C, POULACHON G, ROSSI F, et al. Tool wear monitoring and hole surface quality during CFRP drilling[J]. Procedia CIRP, 2014, 13:163-168.

Full-Text