|
- 2018
稀土改性剂对玻璃纤维-SiO2/聚四氟乙烯复合材料性能的影响
|
Abstract:
采用不同的稀土改性剂(La、Ce、Pr、Nd和Sm)对SiO2和玻璃纤维(GF)进行改性处理,SiO2含量为55wt%,GF含量为2wt%。填料改性处理后与聚四氟乙烯(PTFE)分散液在高速分散机中混合,然后通过热压烧结法制得GF-SiO2/PTFE复合材料。考察了不同的稀土改性剂对GF-SiO2/PTFE复合材料吸水性、介电性能、热膨胀系数和力学性能的影响。采用FTIR手段对稀土La改性剂,未改性的填料和改性后的填料结构进行了测试。并用SEM和EDS对复合材料的断口形貌及表面处理前后填料的形貌进行观察和能谱分析。结果表明:由于稀土La的电子层结构比其他轻稀土更稳定,对阴离子的吸引作用比其他轻稀土强,稀土La改性剂比其他的稀土改性剂能更好地促进填料GF与PTFE界面粘合,改善GF-SiO2/PTFE复合材料性能。GF-SiO2/PTFE复合材料的介电性能受到La含量的影响,当La含量为0.3wt%时介电性能最佳。 The different solution of rare earth modifier (La, Ce, Pr, Nd and Sm) were used to modify glass fiber (GF) and silica (SiO2), the glass fiber-SiO2/polytetrafluoroethylene (GF-SiO2/PTFE) composites of 55wt% SiO2 and 2wt% GF were mixed by a high-speed dispersion machine and prepared by hot-pressing. The effects of rare earth modifier on the properties of the composites material were investigated, such as the water absorption, the thermal, the dielectric properties, the tensile strength and morphology. The FTIR method was used to investigate the structures of rare earth La, unmodified filler and modified filler. The surface morphology and element were analyzed by SEM and EDS. The results show that rare earth La is superior to other rare earth modifier in promoting the interfacial adhesion between glass fiber and polytetrafluoroethylene (PTFE) and improving the water absorption, the coefficient of thermal expansion, the dielectric properties and tensile properties of the GF-SiO2/PTFE composites due to the stable electronic structure of rare earth La and the strong attraction to the anion.. The dielectric properties of the GF-SiO2/PTFE composites is mainly affected by the content of rare earth La, and the optimum performance of the GF-SiO2/PTFE composites is obtained at 0.3wt% rare earth La content.
[1] | 李军伟. 稀土改性空心玻璃微珠复合材料的微观结构及性能研究[D]. 天津:天津大学, 2012. LI Junwei. A study on microscopic structure and properties of rare earth modified hollow glass beads composites[D]. Tianjin:Tianjin University, 2012(in Chinese). |
[2] | 吴茂英. 稀土塑料助剂开发与应用研究进展[J]. 塑料, 2003, 32(5):18-22. WU Maoying. Development and application of rare earth plastics additives[J]. Plastics, 2003, 32(5):18-22(in Chinese). |
[3] | NIGGEMANN C, SONG Y S, GILLESPIE J W, et al. Experimental investigation of the controlled atmospheric pressure resin infusion (CAPRI) process[J]. Journal of Composite Materials, 2008, 42(11):1049-1061. |
[4] | 江波, 周倩倩, 朱爱萍, 等. 埃洛石/玻纤/聚四氟乙烯复合材料的热、力学、摩擦磨损性能及界面[J]. 复合材料学报, 2016, 33(9):1999-2005. JIANG Bo, ZHOU Qianqian, ZHU Aiping, et al. Friction wear thermal expansion and mechanical properties of hallpy-site-glass fiber/polytetrafluoroethylene composite[J]. Acta Materiae Compositae Sinica, 2016, 33(9):1999-2005(in Chinese). |
[5] | 石国军, 李翠, 袁月. 莫来石与碳纤维协同填充的聚四氟乙烯基复合材料及其摩擦学性能[J]. 复合材料学报, 2016, 33(9):1886-1898. SHI Guojun, LI Cui, YUAN Yue. Polytetrafluoroethylene matrix composites synergistically filled with mullite and carbon fiber and its tribological performances[J]. Acta Materiae Compositae Sinica, 2016, 33(9):1886-1898(in Chinese). |
[6] | 吴炬, 程先华. 稀土处理对F-12纤维/环氧复合材料拉伸性能的影响[J]. 上海交通大学学报, 2005, 39(11):1795-1798. WU Ju, CHENG Xianhua. The effect of rare earth treatment on tensile properties of F-12 fiber reinforced epoxy composites[J]. Journal of Shanghai Jiaotong University, 2005, 39(11):1795-1798(in Chinese). |
[7] | 吴炬, 程先华. 稀土改性剂处理对芳纶/环氧复合材料层间剪切强度的影响[J]. 稀有金属材料与工程, 2005, 34(12):1917-1920. WU Ju, CHENG Xianhua. Effect of rare earth modifier treatment on interlaminar shear strength of Aramid/Epoxy composites[J]. Rare Metal Materials and Engineering, 2005, 34(12):1917-1920(in Chinese). |
[8] | 洪伟. 稀土改性TiO2光催化氧化苯类有机废气研究[D]. 广州:华南理工大学, 2003. HONG Wei. A study on microscopic structure and properties of rare earth modified hollow glass beads composites[D]. Guangzhou:South China University of Technology, 2003(in Chinese). |
[9] | CARROLL J R, MCGINNIS L W, MILLER T L, et al. Glass fiber reinforced fluoropolymeric circuit laminate:US, B32B17/02 US4886699[P]. 1989-12-12. |
[10] | RAJESH S, MURALI K P, PRIYADARSINI V, et al. Rutile filled PTFE composites for flexible microwave substrate applications[J]. Materials Science & Engineering B, 2009, 163(1):1-7. |
[11] | 闫翔宇, 袁颖, 张树人, 等. SiO2-TiO2/聚四氟乙烯复合材料的制备及热膨胀性能[J]. 复合材料学报, 2013, 30(6):108-113. YAN Xiangyu, YUAN Ying, ZHUANG Shuren, et al. Fabrication and thermal expansion behavior of SiO2-TiO2 ceramic filled PTFE composites[J]. Acta Materiae Compositae Sinica, 2013, 30(6):108-113(in Chinese). |
[12] | MURALI K P, RAJESH S, PRAKASH O, et al. Comparison of alumina and magnesia filled PTFE composites for microwave substrate applications[J]. Materials Chemistry & Physics, 2009, 113(1):290-295. |
[13] | 吴开拓, 袁颖, 张树人, 等. 低损耗ZrTi2O6填充PTFE复合基板性能[J]. 复合材料学报, 2013, 30(6):76-81. WU Kaituo, YUAN Ying, ZHUANG Shuren, et al. Properties of low loss ZrTi2O6 filled PTFE composite substrates[J]. Acta Materiae Compositae Sinica, 2013, 30(6):76-81(in Chinese). |
[14] | RAJESH S, MURALI K P, RATHEESH R. Preparation and characteriza-tion of high permittivity and low loss PTFE/CaTiO3 microwave laminates[J]. Polymer Composites, 2009, 30(10):1480-1485. |
[15] | 游媛媛, 袁颖. 复配偶联剂对SiO2/聚四氟乙烯复合材料性能的影响[J]. 复合材料学报, 2015, 32(2):465-470. YOU Yuanyuan, YUAN Ying. Influence of compound coupling agent on properties of SiO2/polyetrafluoroethylene composites[J]. Acta Materiae Compositae Sinica, 2015, 32(2):465-470(in Chinese). |
[16] | CHEN Y C, LIN H C, LEE Y D. The effects of filler content and size on the properties of PTFE/SiO2 composites[J]. Journal of Polymer Research, 2003, 10(4):247-258. |
[17] | 欧宝立, 李笃信. 表面修饰纳米SiO2增强增韧聚氯乙烯[J]. 复合材料学报, 2009, 26(1):48-53. OU Baoli, LI Duxin. Surface modified nanometer silica toughening and reinforcing polyvinylchloried[J]. Acta Materiae Compositae Sinica, 2009, 26(1):48-53(in Chinese). |
[18] | ARTHUR D J, MOSKO J C, JACKSON C S, et al. Electrical substrate material:US, B32B5/16 US4849284[P]. 1989-7-18. |
[19] | ASTM. Standard test method for tensile properties of plastics:ASTM D638-89[J]. Philadelphia:ASTM, 2003. |
[20] | LIU Li, ZHANG Liqun, ZHAO Suhe, et al. Review on rare earth/polymer composite[J]. Journal of Rare Earths, 2002, 20(4):241-248. |
[21] | MURALI K P, RAJESH S, PRAKASH O, et al. Effects of silane coatings in aqueous and non-aqueous media on the properties of magnesia filled PTFE laminates[J]. Materials Chemistry & Physics, 2010, 122(2-3):317-320. |
[22] | RAMAJO L, CASTRO M S, REBOREDO M M. Effect of silane as coupling agent on the dielectric properties of BaTiO3-epoxy composites[J]. Composites Part A:Applied Science & Manufacturing, 2007, 38(8):1852-1859. |
[23] | ASTM. Standard test method for water absorption of plastics:ASTM D570-1985[S]. Philadelphia:ASTM, 1985. |
[24] | PARK S J, JIN J S. Effect of silane coupling agent on mechanical interfacial properties of glass fiber-reinforced unsaturated polyester composites[J]. Journal of Polymer Science Part B:Polymer Physics, 2003, 41(1):55-62. |