|
|
- 2018
聚醚砜-环氧树脂共混体系相分离过程的数值模拟
|
Abstract:
| [1] | RICO M, LíPEZ J, MONTERO B, et al. Phase separation and morphology development in a thermoplastic-modified toughened epoxy[J]. European Polymer Journal, 2012, 48(10):1660-1673. |
| [2] | 郭战胜, 杜善义, 张博明, 等. 先进复合材料用环氧树脂的固化反应和化学流变[J]. 复合材料学报, 2004, 21(4):146-151. GUO Z S, DU S Y, ZHANG B M, et al. Cure kinetics and chemorheological behavior of epoxy resin used in advanced composites[J]. Acta Materiae Compositae Sinica, 2004, 21(4):146-151(in Chinese). |
| [3] | 唐晓林. 聚醚砜改性环氧体系二次相分离的研究[D]. 上海:复旦大学, 2004. TANG X L. Study on double phase separation in polyethersulfone modified epoxy resin[D]. Shanghai:Fudan University, 2004(in Chinese). |
| [4] | 刘小云, 余英丰, 甘文君, 等. 热塑性树脂改性热固性树脂体系固化反应诱导相分离研究进展[J]. 材料导报, 2007, 21(4):34-40. LIU X Y, YU Y F, TANG P, et al. The progress in the research on polymerization-induced phase separation of thermoplastic resin modified thermoset resin[J]. Materials Review, 2007, 21(4):34-40(in Chinese). |
| [5] | 杨玉良, 邱枫, 唐萍, 等. 高分子体系相分离动力学及图样生成和选择[J]. 化学进展, 2006, 18(4):363-381. YANG Y L, QIU F, TANG P, et al. Phase separation kinetics and pattern formation and selection in polymer systems[J]. Progress Chemistry, 2006, 18(4):363-381(in Chinese). |
| [6] | 张秀娟. 热塑改性热固性树脂体系固化中的形貌-流变学研究[D]. 上海:复旦大学, 2008. ZHANG X J. The morphology and rheology during cure of thermoplastics modified thermosetting systems[D]. Shanghai:Fudan University, 2008(in Chinese). |
| [7] | YU Y F, SHEN G B, LIU Z Y. Morphology of epoxy/thermoplastic blends[M]. Berlin:Springer, 2016. |
| [8] | GIRARD-REYDET E, VICARD V, PASCAULT J P, et al. Polyetherimide-modified epoxy networks:Influence of cure conditions on morphology and mechanical properties[J]. Journal of Applied Polymer Science, 1997, 65(12):2433-2445. |
| [9] | 张兴迪, 刘刚, 党国栋, 等. 含磷聚芳醚酮颗粒层间增韧碳纤维/双马树脂RTM复合材料[J]. 高分子学报, 2016(9):1254-1262. ZHANG X D, LIU G, DANG G D, et al. Properties of interlaminar toughened CF/BMI composites by phosphorus-containing PAEK particles[J]. Acta Polymerica Sinica, 2016(9):1254-1262(in Chinese). |
| [10] | 张明, 安学峰, 唐邦铭, 等. 增韧环氧树脂相结构[J]. 复合材料学报, 2007, 24(1):13-17. ZHANG M, AN X F, TANG B M, et al. Phase structure of a toughened epoxy system[J]. Acta Materiae Compositae Sinica, 2007, 24(1):13-17(in Chinese). |
| [11] | 程群峰. 双马来酰亚胺树脂基复合材料的离位增韧研究[D]. 杭州:浙江大学, 2007. CHENG Q F. Studies on toughening composites based on BMI resin by Ex-Situ concept[D]. Hangzhou:Zhejiang University, 2007(in Chinese). |
| [12] | YU Y F, WANG M H, GAN W J, et al. Phase separation and rheological behavior in thermoplastic modified epoxy systems[J]. Colloid and Polymer Science, 2006, 284(10):1185-1190. |
| [13] | RICO M, LíPEZ J, MONTERO B, et al. Influence of the molecular weight of a modifier on the phase separation in an epoxy thermoset modified with a thermoplastic[J]. European Polymer Journal, 2014, 58(9):125-134. |
| [14] | CHAUDHARY S, SUREKHA P, KUMAR D, et al. Amine-functionalized poly(styrene) microspheres as thermoplastic toughener for epoxy resin[J]. Polymer Composites, 2015, 36(1):174-183. |
| [15] | JYOTISHKUMAR P, MOLDENAERS P, GEORGE S M, et al. Viscoelastic effects in thermoplastic poly(styrene-acrylonitrile)-modified epoxy-DDM system during reaction induced phase separation[J]. Soft Matter, 2012, 8(28):7452-7462. |
| [16] | 张朋, 刘刚, 胡晓兰, 等. 结构化增韧层增韧RTM复合材料性能[J]. 复合材料学报, 2012, 29(4):1-9. ZHANG P, LIU G, HU X L, et al. Properties of toughened RTM composites by structural toughening layer[J]. Acta Materiae Compositae Sinica, 2012, 29(4):1-9(in Chinese). |
| [17] | HWANG J W, PARK S D, CHO K, et al. Toughening of cyanate ester resins with cyanated polysulfones[J]. Polymer, 1997, 38(8):1835-1843. |
| [18] | LAMARI H, AMMAR A, LEYGUE A, et al. First steps on the modeling and simulation of thermoplastic/thermoset phase separation[J]. Key Engineering Materials, 2012, 504-506:283-288. |
| [19] | 张家宁. 高分子体系在静态及剪切流动下的黏弹性相分离[D]. 上海:复旦大学, 2002. ZHANG J N. Viscoelastic phase separation of polymer systems under quiescent conditions and shear flow[D]. Shanghai:Fudan University, 2002(in Chinese). |
