|
|
- 2018
液体垫片对复合材料单搭接螺栓接头力学性能的影响
|
Abstract:
| [1] | COLEMAN R M. The effects of design, manufacturing processes and operations management on the assembly of aircraft composite structure[D]. Massachusetts:Massachusetts Institute of Technology, 1991. |
| [2] | DHOTE J X, COMER A J, STANLEY W F, et al. Study of the effect of liquid shim on single-lap joint using 3D digital image correlation[J]. Composite Structures, 2013, 96(4):216-225. |
| [3] | HUHNE C, ZERBST A K, KUHLMANN G, et al. Progressive damage analysis of composite bolted joints with liquid shim layers using constant and continuous degradation models[J]. Composite Structures, 2010, 92(2):189-200. |
| [4] | COMER A J, DHOTE J X, STANLEY W F, et al. Thermo-mechanical fatigue analysis of liquid shim in mechanically fastened hybrid joints for aerospace applications[J]. Composite Structures, 2012, 94(7):2181-2187. |
| [5] | ZHAI Y N, LI D S, LI X Q, et al. An experimental study on the effect of joining interface condition on bearing response of single-lap, countersunk composite-aluminum bolted joints[J]. Composite Structures, 2015, 134:190-198. |
| [6] | LIU L, ZHANG J, CHEN K, et al. Experimental and numerical analysis of the mechanical behavior of composite-to-titanium bolted joints with liquid shim[J]. Aerospace Science & Technology, 2016, 49(5):167-172. |
| [7] | 裴瑞光, 肖毅, 陈豪麟, 等. 复合材料螺栓连接预紧力松弛的温度-时间依存行为[J]. 复合材料学报, 2016, 33(4):768-778. PEI R G, XIAO Y, CHEN H L, et al. Temperature-time dependent behavior for preload relaxation in bolted composite joints[J]. Acta Materiae Compositae Sinica, 2016, 33(4):768-778(in Chinese). |
| [8] | 陈昆昆, 刘龙权, 汪海. 过盈配合和预紧力的混合作用对复合材料机械连接结构的影响及其机制[J]. 复合材料学报, 2013, 30(6):243-251. CHEN K K, LIU L Q, HAI W. Combined effects and mechanism of interference fit and clamping force on composite mechanical joints[J]. Acta Materiae Compositae Sinica, 2013, 30(6):243-251(in Chinese). |
| [9] | CAMPBELL F C. Manufacturing processes for advanced composites[M]. Elsevier Science, 2004. |
| [10] | LIU L. The influence of the substrate's stiffness on the liquid shim effect in composite-to-titanium hybrid bolted joints[J]. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering, 2014, 228(3):470-479. |
| [11] | 张爽, 王栋, 郦正能, 等. 复合材料层合板多钉连接结构累积损伤过程可视化仿真模拟[J]. 复合材料学报, 2006, 23(3):135-140. ZHANG S, WANG D, LI Z N, et al. Visual simulation of damage accumulation for composite multiple bolted joints[J]. Acta Materiae Compositae Sinica, 2006, 23(3):135-140(in Chinese). |
| [12] | 姜晓伟, 曾建江, 曾昭炜, 等. 配合方式对复合材料单钉单剪螺栓连接接头刚度的影响及其机制[J]. 复合材料学报, 2016, 33(3):589-596. JIANG X W, ZENG J J, ZENG Z W, et al. Influence and mechanism of fitting mode on stiffness of single-bolt, single-lap composite bolted joint[J]. Acta Materiae Compositae Sinica, 2016, 33(3):589-596(in Chinese). |
| [13] | 姜云鹏, 岳珠峰. 复合材料层合板螺栓连接失效的数值模拟[J]. 复合材料学报, 2005, 22(4):177-182. JIANG Y P, YUE Z F. Numerical failure simulation of bolt-loaded composite laminate[J]. Acta Materiae Compositae Sinica, 2005, 22(4):177-182(in Chinese). |
| [14] | MCCARTHY C T, MCCARTHY M A. Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints:Part Ⅱ-Effects of bolt-hole clearance[J]. Composite Structures, 2005, 71(2):159-175. |
| [15] | GRAY P J, MCCARTHY C T. A global bolted joint model for finite element analysis of load distributions in multi-bolt composite joints[J]. Composites Part B:Engineering, 2010, 41(4):317-325. |
| [16] | OLMEDO A, SANTIUSTE C. On the prediction of bolted single-lap composite joints[J]. Composite Structures, 2012, 94(6):2110-2117. |
| [17] | ASCIONE F, FEO L, MACERI F. An experimental investigation on the bearing failure load of glass fibre/epoxy laminates[J]. Composites Part B:Engineering, 2009, 40(3):197-205. |
| [18] | ASCIONE F, FEO L, MACERI F, et al. On the pin-bearing failure load of GFRP bolted laminates:An experimental analysis on the influence of bolt diameter[J]. Composites Part B:Engineering, 2010, 41(6):482-490. |
| [19] | FEO L, MARRA G, MOSALLAM A S. Stress analysis of multi-bolted joints for FRP pultruded composite structures[J]. Composite Structures, 2012, 94(12):3769-3780. |
| [20] | LI H S, LU Z Z, ZHANG Y. Probabilistic strength analysis of bolted joints in laminated composites using point estimate method[J]. Composite Structures, 2009, 88(2):202-211. |
| [21] | DANO M L, KAMAL E, GENDRON G. Analysis of bolted joints in composite laminates:Strains and bearing stiffness predictions[J]. Composite Structures, 2007, 79(4):562-570. |
| [22] | DANO M L, GENDRON G, PICARD A. Stress and failure analysis of mechanically fastened joints in composite laminates[J]. Composite Structures, 2000, 50(3):287-296. |
| [23] | ASTM International. Standard test method for bearing response of polymer matrix composite laminates:ASTM D5961[S]. West Conshohocken:ASTM International, 2013. |
| [24] | 谢鸣九. 复合材料连接[M]. 上海:上海交通大学出版社, 2011. XIE M J. Joints for composites materials[M]. Shanghai:Shanghai Jiaotong University Press, 2011(in Chinese). |
| [25] | HYER M W, KLANG E C, COOPER D E. The effects of pin elasticity, clearance, and friction on the stresses in a pin-loaded orthotropic plate[J]. Journal of Composite Materials, 1987, 21(3):190-206. |
| [26] | GUESS T R, REEDY E D, STAVIG M E. Mechanical properties of Hysol EA-9394 structural adhesive, SAND-95-0229[R]. Albuquerque:Sandia National Laboratories, 1995. |
| [27] | XIAO Y, ISHIKAWA T. Bearing strength and failure behavior of bolted composite joints (part I:Experimental investigation)[J]. Composites Science & Technology, 2005, 65(7-8):1022-1031. |
| [28] | VALENZA A, FIORE V, BORSELLINO C, et al. Failure map of composite laminate mechanical joint[J]. Journal of Composite Materials, 2007, 41(8):951. |
| [29] | STOCCHI C, ROBINSON P, PINHO S T. A detailed finite element investigation of composite bolted joints with countersunk fasteners[J] Composites Part A:Applied Science and Manufacturing, 2013, 52:143-150. |
| [30] | MARSH G. Airbus A350 XWB update[J]. Reinforced Plastics, 2010, 54(6):20-24. |
| [31] | MCCARTHY C T, GRAY P J. An analytical model for the prediction of load distribution in highly torqued multi-bolt composite joints[J]. Composite Structures, 2011, 93(2):287-298. |
| [32] | RANDY L. Evaluation of shimming options with applications to JSF[R]. USA:Advanced Affordability Initiative, 1999. |
