三维机织碳纤维/环氧树脂复合材料在两种测量方法下的热响应机制对比
Comparison of thermal response mechanisms for three dimensional woven carbon fiber/epoxy resin composites under two measurement methods

DOI: 10.13801/j.cnki.fhclxb.20170322.002

Keywords: 三维机织,复合材料,导热性能,瞬态热线法,闪光法
3D woven,composites,thermal property,transient hot-wire method,flash method

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	MA P B, GAO Z. A review on the impact tension behaviors of textile structural composites[J]. Journal of Industrial Textiles, 2015, 44(4):572-604.
[2]	杨彩云, 李嘉禄. 三维机织复合材料力学性能的各向异性[J]. 复合材料学报, 2006, 23(2):59-64. YANG C Y, LI J L. Mechanical anisotropy of three dimensional woven composites[J]. Acta Materiae Compositae Sinica, 2006, 23(2):59-64(in Chinese).
[3]	余育苗, 王肖钧, 李永池, 等. 三维正交机织复合材料的单胞模型及应用[J]. 复合材料学报, 2009, 26(4):181-185. YU Y M, WANG X J, LI Y C, et al. Cell model of 3D orthogonal woven composite and its application[J]. Acta Materiea Compositae Sinica, 2009, 26(4):181-185(in Chinese).
[4]	HALLAL A, YOUNES R, FARDOUN F, et al. Improved analytical model to predict the effective elastic properties of 2.5D interlock woven fabrics composite[J]. Composite Structures, 2012, 94(10):3009-3028.
[5]	卢子兴, 周原, 冯志海, 等. 2.5D机织复合材料压缩性能实验与数值模拟[J]. 复合材料学报, 2015, 32(1):150-159. LU Z X, ZHOU Y, FENG Z H, et al. Experiment and numerical simulation on compressive properties of 2.5D woven fabric composites[J]. Acta Materiae Compositae Sinica, 2015, 32(1):150-159(in Chinese).
[6]	HALLAL A, YOUNES R, FARDOUN F. Review and comparative study of analytical modeling for the elastic properties of textile composites[J]. Composites Part B:Engineering, 2013, 50:22-31.
[7]	ZHAO S, ZHOU X G, YU J S, et al. Fabrication and characterization of 2.5D and 3D SiCf/SiC composites[J]. Fusion Engineering and Design, 2013, 88(9-10):2453-2456.
[8]	张克, 孙建平, 邓建兵. 激光闪光法热扩散率测量仪温度测量系统抗干扰措施研究[J]. 计量学报, 2011, 32(6A):70-73. ZHANG K, SUN J P, DENG J B. Study on laser flash method thermal diffusivity meter for the interference temperature measurement[J]. Acta Metrologica Sinica, 2011, 32(6A):70-73(in Chinese).
[9]	ZHANG C Y, WANG X W, LIU Y S, et al. Tensile fatigue of a 2.5D-C/SiC composite at room temperature and 900℃[J]. Materials and Design, 2013, 49:814-819.
[10]	张典堂, 陈利, 孙颖, 等. UHMWPE/LLDPE复合材料层板低速冲击及冲击后压缩性能实验研究[J]. 复合材料学报, 2013, 30(30):107-111. ZHANG D T, CHEN L, SUN Y, et al. Low velocity impact and residual compressive strength after impact properties of UHMWPE/LLDPE composite laminates[J]. Acta Materiae Compositae Sinica, 2013, 30(30):107-111(in Chinese).
[11]	SCHUSTER J, HEIDER D, SHARP K, et al. Thermal conductivities of three-dimensionally woven fabric composites[J]. Composites Science and Technology, 2008, 68(9):2085-2091.
[12]	KUMAR S, KUMAR A, DEVI G R, et al. Preparation of 3D orthogonal woven C-SiC composite and its characterization for thermo-mechanical properties[J]. Materials Science and Engineering:A, 2011, 528(19-20):6210-6216.
[13]	AI S G, HE R L, PEI Y M. A numerical study on the thermal conductivity of 3D woven C/C composites at high temperature[J]. Applied Composite Materials, 2015, 22(6):823-835.
[14]	DONG K, LIU K, PAN L J, et al. Experimental and numerical investigation on the thermal conduction properties of 2.5D angle-interlock woven composites[J]. Composite Structures, 2016, 154:319-333.
[15]	闵凯, 刘斌, 温广. 导热系数测量方法与应用分析[J]. 保鲜与加工, 2005, 5(6):35-38. MIN K, LIU B, WEN G. Application of measuring method of thermal conductivities[J]. Storage and Process, 2005, 5(6):35-38(in Chinese).
[16]	翟德怀. 基于Hot Disk的薄板材料导热系数测量方法的研究[D]. 广州:华南理工大学, 2015. ZHAI D H. Study on the thermal conductivity measurement of thin samples by Hot Disk thermal constants analyser[D]. Guangzhou:South China University of Technology, 2015.
[17]	BUONOMO B, COLLA L, FEDELE L, et al. A comparison of nanofluid thermal conductivity measurements by flash and hot disk techniques[J]. Journal of Physics:Conference Series, 2014, 547(1):012046.
[18]	宋磊磊, 李嘉禄, 赵玉芬, 等. 预制体结构对针刺石英纤维/环氧树脂复合材料导热性能的影响[J]. 复合材料学报, 2016, 33(5):955-961. SONG L L, LI J L, ZHAO Y F, et al. Effects of preform structure on thermal conductivity of needle-punched quartz fiber/epoxy composites[J]. Acta Materiea Compositae Sinica, 2016, 33(5):955-961(in Chinese).
[19]	FRANCO A. An apparatus for the routine measurement of thermal conductivity of materials for building application based on a transient hot-wire method[J]. Applied Thermal Engineering, 2007, 27(14-15):2495-2504.
[20]	李嘉禄. 三维纺织复合材料增强体结构和树脂复合固化技术[J]. 航天返回与遥感, 2008, 29(4):55-61. LI J L. The structures of three dimensional textile composites reinforcements and consolidating technologies of resin[J]. Spacecraft Recovery and Remote Sensing. 2008, 29(4):55-61(in Chinese).
[21]	AI S G, FU H L, HE R J, et al. Multi-scale modeling of thermal expansion coefficients of C/C composites at high temperature[J]. Materials and Design, 2015, 82:181-188.
[22]	SONG L L, GENG W, ZHAO Y F, et al. Thermal conductivities of 2.5 dimensional woven composites[J]. Polymers and Polymer Composites, 2016, 24(4):241-248.

Full-Text