|
|
- 2018
分层对复合材料机械连接结构承载能力的影响
|
Abstract:
| [1] | 章继峰, 谢永刚, 张璐. 接头局部增强的复合材料层合板螺栓连接试验与数值模拟[J]. 复合材料学报, 2013, 30(6):191-196. ZHANG J F, XIE Y G, ZHANG L. Experimental and numerical simulation of composite laminate bolted joints with local reinforcement[J]. Acta Materiae Compositae Sinica, 2013, 30(6):191-196(in Chinese). |
| [2] | KHASHABA U A. Delamination in drilling GFR-thermoset composites[J]. Composite Structures, 2004, 63(3):313-327. |
| [3] | GRILO T J, PAULO R M F, SILVA C R M, et al. Experimental delamination analyses of CFRPs using different drill geometries[J]. Composites Part B:Engineering, 2013, 45(1):1344-1350. |
| [4] | 孙先念, 陈浩然. 含分层损伤复合材料层合板分层扩展研究[J]. 力学学报, 2000, 32(2):223-232. SUN X N, CHEN H R. Delamination growth in composite laminates[J]. Acta Mechanica Sinica, 2000, 32(2):223-232(in Chinese). |
| [5] | RICCIO A, RAIMONDO A, FRAGALE S, et al. Delamination buckling and growth phenomena in stiffened composite panels under compression. Part I:An experimental study[J]. Journal of Composite Materials, 2014, 48(23):2843-2855. |
| [6] | RICCIO A, RAIMONDO A, CAPRIO D F, et al. Delaminations buckling and growth phenomena in stiffened composite panels under compression Ⅱ:A numerical study[J]. Journal of Composite Materials, 2014, 48(23):2857-2870. |
| [7] | CHISHTI M, WANG C H, THOMSON R S, et al. Experimental investigation of damage progression and strength of countersunk composite joints[J]. Composite Structures, 2012, 94(3):865-873. |
| [8] | SEN F, PAKDIL M, SAYMAN O, et al. Experimental failure analysis of mechanically fastened joints with clearance in composite laminates under preload[J]. Materials & Design, 2008, 29(6):1159-1169. |
| [9] | GRAY P J, O'HIGGINS R M, MCCARTHY C T. Effect of thickness and laminate taper on the stiffness, strength and secondary bending of single-lap, single-bolt countersunk composite joints[J]. Composite Structures, 2014, 107:315-324. |
| [10] | STOCCHI C, ROBINSON P, PINHO S T. A detailed finite element investigation of composite bolted joints with countersunk fasteners[J]. Composites Part A:Applied Science and Manufacturing, 2013, 52:143-150. |
| [11] | MCCARTHY C T, MCCARTHY M A, LAWLOR V P. Progressive damage analysis of multi-bolt composite joints with variable bolt-hole clearances[J]. Composites Part B:Engineering, 2005, 36(4):290-305. |
| [12] | Abaqus-Inc. Abaqus user manual, version 6.11 dassault systèmes simulia corp[M]. Abaqus-Inc, 2011. |
| [13] | 姜晓伟, 朱书华, 李国弘, 等. 含分层缺陷复合材料层合板分层扩展研究[J]. 航空计算技术, 2014(5):73-76. JIANG X W, ZHU S H, LI G H, et al. Investigation of delamination propagation of composite laminate with delaminait on defects[J]. Aeronautical Computing Technique, 2014(5):73-76(in Chinese). |
| [14] | HASHIN Z. Failure criteria for unidirectional fiber composites[J]. Journal of Applied Mechanics, 1980, 47(2):329-334. |
| [15] | CAMANHO P P, MATTHEWS F L. A progressive damage model for mechanically fastened joints in composite laminates[J]. Journal of Composite Materials, 1999, 33(24):2248-2280. |
| [16] | TSAO C C, HOCHENG H, CHEN Y C. Delamination reduction in drilling composite materials by active backup force[J]. CIRP Annals, 2012, 61(1):91-94. |
| [17] | MOURA M F S F, GON？ALVES J P M, MARQUES A T, et al. Prediction of compressive strength of carbon-epoxy laminates containing delamination by using a mixed-mode damage model[J]. Composite Structures, 2000, 50(2):151-157. |
| [18] | CHISHTI M, WANG C H, THOMSON R S, et al. Numerical analysis of damage progression and strength of countersunk composite joints[J]. Composite Structures, 2012, 94(2):643-653. |
| [19] | HERRINGTON P D, SABBAGHIAN M. Factors affecting the friction coefficients between metallic washers and composite surfaces[J]. Composites, 1991, 22(6):418-424. |
| [20] | 贾宏, 张军, 黄刘刚. 薄板粘接结构界面力学模型和数值模拟[J]. 科技导报, 2008, 26(16):64-67. JIA H, ZHANG J, HUANG L G. Cohesive inter face mechanical model and simulation of bonding structure[J]. Science & Technology Review, 2008, 26(16):64-67(in Chinese). |
