|
|
- 2017
新型2-2PRUR并联机构运动学分析及工作空间优化
|
Abstract:
摘要 基于工业生产线实际需求，设计了新型2-2PRUR并联机构，进行运动学分析的同时基于散点图对工作空间进行了优化。提出了通过拆分动平台为两部分并加装行星轮系以解决四自由度并联机构过约束及增大转动自由度转角的方法；运用坐标法写出机构约束方程并求解位置正反解；利用位置反解方程解的散点画出机构工作空间，同时以散点数最大为原则运用遗传算法对工作空间进行优化，获得了合理的结构参数。为此类并联机构的研究和应用奠定了基础。
Abstract：A novel 2-2PRUR parallel mechanism is proposed to fit the actual demand of industrial production line. Kinematics analysis and workspace optimization are performed based on scatter plot. A method is presented by splitting the moving platform into two parts and adding planetary gear train, which could solve the over-constraints of four degrees of freedom parallel mechanism and increase the turning angle. The constraint equations are obtained using the coordinate method. The inverse-forward solutions of the mechanism are worked out. And the workspace is obtained by using the scatter plot of inverse kinematic solutions. Meanwhile, reasonable structural parameters are obtained by optimizing workspace with the principle of maximizing scattered points based on genetic algorithm. This work would lay the foundation for the future research and application of this type of parallel mechanism.
| [1] | KRUT S,COMPANY O,BENOIT M,et al.I4:A new parallel mechanism for Scara motions[C]//Proceedings of the IEEE International Conference on Robotics & Automation.Piscataway,NJ:IEEE Press,2003:1875-1880. |
| [2] | KRUT S,NABAT V,COMPANY O,et al.A high-speed parallel robot for Scara motions[C]//Proceedings of IEEE International Conference on Robotics and Automation.Piscataway,NJ:IEEE Press,2004:4109-4115. |
| [3] | CORADINI C,FAUROUX J C,KRUT S,et al.Evalution of a 4 degree of freedom parallel manipulator stiffness[C]//Proceedings of the 11th World Congress in Mechanism and Machine Science.Beijing:China Machinery Press,2004:1857-1861. |
| [4] | GUO S,FANG Y,QU H.Type synthesis of 4-DOF non-overconstrained parallel mechanisms based on screw theory[J].Robotica,2012,30(1):31-37. |
| [5] | COMPANY O,KRUT S,PIERROT F.Internal singularity analysis of a class of lower mobility parallel manipulators with articulated traveling plate[J].IEEE Transactions on Robotics,2006,22(1):1-11. |
| [6] | 黄真,刘婧芳,李艳文.论机构自由度[M].北京:科学出版社,2011:90-103.HUANG Z,LIU J F,LI Y W.Mobility of mechanisms[M].Beijing:Science Press,2011:90-103(in Chinese). |
| [7] | 房海蓉,方跃法,郭胜.四自由度对称并联机器人结构综合方法[J].北京航空航天大学学报,2005,31(3):346-350.FANG H R,FANG Y F,GUO S.Structural synthesis method for 4-degrees-of-freedom symmetrical parallel manipulators[J].Journal of Beijing University of Aeronautics and Astronautics,2005,31(3):346-350(in Chinese). |
| [8] | 郭江真,王丹,樊锐,等.3PRS/UPS冗余驱动并联机器人刚度特性分布[J].北京航空航天大学学报,2014,40(4):500-506.GUO J Z,WANG D,FAN R,et al.Stiffness characteristics distribution of 3PRS/UPS parallel manipulator with actuation redundancy[J].Journal of Beijing University of Aeronautics and Astronautics,2014,40(4):500-506(in Chinese). |
| [9] | CLAVEL R.Delta,a fast robot with parallel geometry[C]//Proceedings of the 18th International Symposium on Industrial Robots.Bedford:IFS Publications,1988:91-100. |
| [10] | ANGELES J.The qualitative synthesis of parallel manipulators[J].Journal of Mechanical Design,2004,126(4):617-624. |
| [11] | KONG X,GOSSELIN C.Type synthesis of 3T1R 4-DOF parallel manipulators based on screw theory[J].Journal of Robotic Systems,2005,22(10):535-547. |
| [12] | GOGU G.Structural synthesis of fully-isotropic parallel robots with Sch nflies motions via theory of linear transformations and evolutionary morphology[J].European Journal of Mechanics-A/Solids,2007,26(2):242-269. |
| [13] | SALGADO O,ALTUZARRA O,PETUYA V,et al.Type synthesis of a novel 3T1R fully-parallel manipulator[J].Journal of Mechanical Design,2008,130(4):042305-1-042305-8. |
| [14] | PIERROT F,NABAT V,COMPANY O,et al.Optimal design of a 4-DOF parallel manipulator:From academia to industry[J].IEEE Transactions on Robotics,2009,25(2):213-224. |
| [15] | PIERROT F,COMPANY O.H4:A new family of 4-DOF parallel robots[C]//Proceedings of IEEE/ASME International Conference on Advanced Intelligent Mechatronics.Piscataway,NJ:IEEE Press,1999:508-513. |
| [16] | ROLLAND L.The Manta and the Kanuk:Novel 4-DOF parallel mechanisms for industrial handling[C]//Proceedings of International Mechanical Engineering Congress and Exposition.New York,NY:ASME,1999:831-844. |
| [17] | 黄真,孔令富,方跃法.并联机器人机构学理论及控制[M].北京:机械工业出版社,1997:18-29.HUANG Z,KONG L F,FANG Y F.Mechanism theory and control of parallel manipulator[M].Beijing:China Machine Press,1997:18-29(in Chinese). |
| [18] | 郭宗和,段建国,郝秀清,等.4-PTT并联机构位置正反解与工作空间分析[J].农业机械学报,2008,39(7):144-148.GUO Z H,DUAN J G,HAO X Q,et al.Analysis on position and workspace of 4-PTT parallel mechanism[J].Transactions of the Chinese Society of Agricultural Machinery,2008,39(7):144-148(in Chinese). |
| [19] | 鄔昌峰.6-SPS并联机器人工作空间研究及其优化设计[D].合肥:合肥工业大学,2003.WU C F.6-SPS parallel mechanism workspace research and optimization[D].Hefei:Hefei University of Technology,2003(in Chinese). |
| [20] | 陈海真,邹忠月,宋宏鹏.基于遗传算法3-RCR并联机器人的结构参数优化设计[J].机械设计与制造,2012(7):49-51.CHEN H Z,ZOU Z Y,SONG H P.Parameters optimization design of 3-RCR parallel robot mechanism based on genetic algorithm[J].Machinery Design & Manufacture,2012(7):49-51(in Chinese). |
