|
|
- 2018
基于等效单轴应变的平面模型及其在密肋复合墙板中的应用
|
Abstract:
为了解决密肋复合墙板中填充砌体在受到循环荷载作用时的平面数值分析问题，该文基于等效单轴应变原理，建立了一个宏观砌体平面材料模型，并将该材料模型与平面应力单元相结合，开发了相应程序。最后，将平面模型与纤维模型相结合对密肋复合墙板进行了模拟分析。结果表明：该模型在模拟处于平面应力状态下的密肋复合墙板时具有较为理想的效果，在满足计算精度的同时，又能充分体现砌体构件的宏观现象，可较为直观地获得砌体结构的应力分布云图，验证了该模型的正确性和适用性。
Abstract：A simple constitutive model was developed to calculate the in-plane stresses of multi-ribbed composite walls subject to cyclic loadings. The equivalent strain concept was used to develop the macro in-plane model for masonry walls with the in-plane model then implemented in plane-stress finite elements. The in-plane model and a fiber model were then combined to simulate the stresses in multi-ribbed composite walls. The results show that the model accurately simulates the stresses in a multi-ribbed composite wall under plane stresses. The accurate results fully reflect the macroscopic phenomena in the masonry components and the stress distribution cloud diagram in the masonry structure is more intuitive. These results verify the accuracy and applicability of the model.
| [1] | 聂建国, 陶慕轩. 采用纤维梁单元分析钢-混凝土组合结构地震反应的原理[J]. 建筑结构学报, 2011, 32(10):11-20. NIE J G, TAO M X. Theory of seismic response analysis of steel-concrete composite structures using fiber beam elements[J]. Journal of Building Structures, 2011, 32(10):11-20. (in Chinese) |
| [2] | 王昆鹏. 密肋复合板结构非线性有限元模型研究[D]. 北京:北京交通大学, 2017. WANG K P. Research on nonlinear finite element models of multi-ribbed composite slab structure[D]. Beijing:Beijing Jiaotong University, 2017. (in Chinese) |
| [3] | 朱伯龙, 金国芳. "混用体系"中型砌块墙片有限元弹塑性分析[J]. 同济大学学报, 1994, 22(1):1-6. ZHU B L, JIN G F. Finite element analysis of mixed block masonry system with middle size blocks[J]. Journal of Tongji University, 1994, 22(1):1-6. (in Chinese) |
| [4] | BA？ANT Z P, OH B H. Crack band theory for fracture of concrete[J]. Matériaux et Construction, 1983, 16(3):155-177. |
| [5] | LIU G Q, SHI C X, BIN J L. The shear strength of unreinforced masonry wall[J]. Journal of Zhuzhou Institute of Technology, 1999, 13(5):52-55. |
| [6] | 张杰. 密肋复合墙板受力性能及斜截面承载力实用设计计算方法研究[D]. 西安:西安建筑科技大学, 2004. ZHANG J. Mechanical property study and practical oblique section design method study on multi-ribbed composite wall[D]. Xi'an:Xi'an University of Architecture and Technology, 2004. (in Chinese) |
| [7] | 曲哲, 叶列平. 基于有效累积滞回耗能的钢筋混凝土构件承载力退化模型[J]. 工程力学, 2011, 28(6):45-51. QU Z, YE L P. Strength deterioration model based on effective hysteretic energy dissipation for RC members under cyclic loading[J]. Engineering Mechanics, 2011, 28(6):45-51. (in Chinese) |
| [8] | 姚谦峰, 陈平, 张荫, 等. 密肋壁板轻框结构节能住宅体系研究[J]. 工业建筑, 2003, 33(1):1-5. YAO Q F, CHEN P, ZHANG Y, et al. Study on energy-saving residential system of multi-ribbed wall slab with light-weight outer frame[J]. Industrial Construction, 2003, 33(1):1-5. (in Chinese) |
| [9] | 王达诠. 应用RVE均质化方法的砌体非线性分析[D]. 重庆:重庆大学, 2002. WANG D Q. Nonlinear analysis of masonry applying the RVE homogenization methods[D]. Chongqing:Chongqing University, 2002. (in Chinese) |
| [10] | KARAPITTA L, MOUZAKIS H, CARYDIS P. Explicit finite-element analysis for the in-plane cyclic behavior of unreinforced masonry structures[J]. Earthquake Engineering and Structural Dynamics, 2011, 40(2):175-193. |
| [11] | 吴方伯, 丁先立, 周绪红, 等. 采用等效平面桁架单元对钢筋混凝土结构进行非线性分析[J]. 建筑结构学报, 2005, 26(5):112-117. WU F B, DING X L, ZHOU X H, et al. Study on the nonlinear analysis of reinforced concrete structures by equivalent plane truss element method[J]. Journal of Building Structures, 2005, 26(5):112-117. (in Chinese) |
| [12] | DARWIN D, PECKNOLD D A. Analysis of RC shear panels under cyclic loading[J]. American Society of Civil Engineers, 2014, 102(2):355-369. |
| [13] | HOGNESTAD E. Study of combined bending and axial load in reinforced concrete members[R]. Bulletin Series of No. 399. Station, Urbana, IL:University of Illinois, 1951. |
