|
|
- 2016
2219铝合金VPTIG焊接残余应力的数值分析
|
Abstract:
2219铝合金经过焊接后出现了严重的软化，为了阐明焊后软化对焊接残余应力计算精度的影响，采用热-弹-塑性有限元计算方法模拟了2219铝合金平板变极性惰性气体保护对接单道焊时的温度场和应力场，并考虑了加工硬化和退火效应的影响。结果表明：软化现象对焊接残余应力的计算结果有显著影响，不考虑焊后软化时会高估焊缝区及其附近的残余应力水平。通过对比计算结果与实验测量结果可知，综合考虑加工硬化、退火效应及接头软化的情况下，数值模拟结果与实测结果吻合较好，说明该数值模拟方法具有较高的计算精度。
Abstract：2219 aluminum alloy welded joints have significantly reduced strength because of the softening during welding. The influence of joint softening on the welding residual stress was studied using the thermal elastic plastic finite element method (T-E-P FEM) to predict the welding temperature and residual stresses in a variable polarity tungsten inert gas (VPTIG) welded 2219 aluminum alloy joint. The influences of work hardening and the annealing were also examined. The simulations show that joint softening significantly influences the longitudinal residual stress and that the longitudinal residual stresses in the weld zone and nearby regions are overestimated when the joint softening is not taken into account. Comparison of the simulated results with measured data shows that when work hardening, annealing and joint softening are considered, the residual stresses predicted by the T-E-P FEM agree well with the measured data, which indicates that this approach can accurately predict residual welding stresses in 2219 aluminum alloy.
| [1] | Rao S R K, Reddy G M, Rao P S, et al. Improving mechanical properties of 2219 aluminium alloy GTA welds by scandium addition [J]. Science and Technology of Welding and Joining, 2005, 10(4)：418-426. |
| [2] | 杜辉. 时效对2219铝合金VPTIG焊接结构性能影响研究[D]. 天津：天津大学, 2012.DU Hui. Study on the Influences of Aging on Performance Variable Polarity TIG Welded Structure of 2219 Aluminum Alloy [D]. Tianjin：Tianjin University, 2012. (in Chinese) |
| [3] | DING Jikun, WANG Dongpo, WANG Ying, et al. Effect of post weld heat treatment on properties of variable polarity TIG welded AA2219 aluminium alloy joints [J]. Transactions of Nonferrous Metals Society of China, 2014, 24(5)：1307-1316. |
| [4] | LI Quan, WU Aiping, LI Yanjun, et al. Influence of temperature cycles on the microstructures and mechanical properties of the partially melted zone in the fusion welded joints of 2219 aluminum alloy [J]. Mataterials Science and Engineering A, 2015, 623：38-48. |
| [5] | Kaufman J G. Properties of Aluminum Alloys: Tensile, Creep, and Fatigue Data at High and Low Temperatures [M]. Materials Park, OH: ASM International, 1999. |
| [6] | Meng Q G, Fang H Y, Yang J G, et al. Analysis of temperature and stress field in Al alloy's twin wire welding [J]. Theoretical and Applied Fracture Mechanics, 2005, 44(2)：178-186. |
| [7] | 上田幸雄, 村川英一, 麻宁绪. 焊接变形和残余应力的数值计算方法与程序[M]. 成都：四川大学出版社, 2008.Ueda Y, Murakawa H, Ma N. Numerical Computation Method and Program for Welding Distortion and Residual Stress [M]. Chengdu：Sichuan University Press, 2008. (in Chinese) |
| [8] | LI Yanjun, LI Quan, WU Aiping, et al. Determination of local constitutive behavior and simulation on tensile test of 2219-T87 aluminum alloy GTAW joints [J]. Transactions of Nonferrous Metals Society of China, 2015, 25(9)：3072-3079. |
| [9] | 邓德安, Kiyoshima S. 退火温度对SUS304不锈钢焊接残余应力计算精度的影响[J]. 金属学报, 2014, 50(5)：626-632.DENG Dean, Kiyoshima S. Influence of annealing temperature on calculation accuracy of welding residual stress in a SUS304 stainless steel joint [J]. Acta Metallurgica Sinica, 2014, 50(5)：626-632. (in Chinese) |
| [10] | 张增磊, 史清宇, 刘园, 等. 焊接数值模拟材料新模型的建立及应用[J]. 焊接学报, 2009, 30(2)：45-48.ZHANG Zenglei, SHI Qingyu, LIU Yuan, et al. Establishment and application of material models for numerical simulation of welding process [J]. Transactions of the China Welding Institution, 2009, 30(2)：45-48. (in Chinese) |
| [11] | Muraca R F, Whittick J S. Materials Data Handbook：Aluminum Alloy 2219 [R]. Washington, DC：NASA Marshall Spance Flight Center, 1972. |
| [12] | 张海波. 几种典型铝合金焊接热裂纹敏感性对比研究[D]. 北京：清华大学, 2008.ZHANG Haibo. A Study on the Susceptibility of Welding Hot Cracking in Several Typical Al-Based Alloys [D]. Beijing：Tsinghua University, 2008. (in Chinese) |
| [13] | 李权. 2219铝合金熔化焊接头力学性能薄弱区研究 [D]. 北京：清华大学, 2015. LI Quan. Investigation on the Weakness Region of the Fusion Welded Joints of 2219 Aluminum Alloy [D]. Beijing：Tsinghua University, 2015. (in Chinese) |
| [14] | Narender K, Rao A S M, Rao K G K, et al. Thermo physical properties of wrought aluminum alloys 6061, 2219 and 2014 by gamma ray attenuation method [J]. Thermochimica Acta, 2013, 569：90-96. |
