|
|
- 2016
高速列车车轮踏面非圆磨耗机理
|
Abstract:
为揭示高速列车车轮踏面非圆磨耗的产生机理,控制高速列车车轮的非圆磨耗,基于高速列车在雨、雪条件下调速制动可能发生轮轨滑动的特点,建立了由轮对和钢轨组成的轮轨系统摩擦自激振动模型,使用该模型对轮轨系统进行了摩擦自激振动发生趋势的仿真分析.仿真结果表明,在轮对调速制动轮轨蠕滑力达到饱和(即滑动)状态下,轮轨系统容易发生摩擦自激振动,此摩擦自激振动能引起车轮非圆磨耗,并提出控制高速列车调速制动时的制动摩擦力使轮轨不发生滑动是抑制车轮非圆磨耗的主要措施,增大钢轨扣件垂向阻尼是控制高速列车车轮非圆磨耗的可行方法.
： In order to understand the generation mechanism for plolygonalization of wheel treads of high-speed trains and to suppress the polygonal wear of wheel treads, a friction-induced self-excited vibration model for wheelset-track system consisting of a wheelset and two rails was set up based on the fact that a wheel probably slips on a rail because of the saturated wheel-rail creep force when a speed-governing brake is applied in rain or snow. With this model, a numerical simulation on the occurrence propensity of the friction-induced self-excited vibration of the wheelset-track system was made. The result shows that when wheels slip on rails in the braking process of trains, the friction-induced self-excited vibration of the wheelset-track system easily occurs. The vibration probably induces plolygonalization of wheel treads. Several factors affecting plolygonalization of wheel treads are analyzed. It is proposed that preventing the wheel from slipping on the rail is a key precaution to suppress plolygonalization of wheel treads. Increasing the damping of the rail fastener is helpful to suppress plolygonalization of wheel treads
| [1] | JOHANSSONA. Out-of-round railway wheels-assessment of wheel tread irregularities in train traffic[J]. Journal of Sound and Vibration, 2006, 293:795-806. |
| [2] | NIELSEN J C O, LUNDEN R, JOHANSSON A, et al. Train-track interaction and mechanisms of irregular wear on wheel and rail surface[J]. Vehicle System Dynamics, 2003, 40(1-3):3-54. |
| [3] | JIN Xuesong, WU Lei, FANG Jianying, et al. An investigation into the mechanism of the polygonalwearof metro train wheels and its effect on the dynamic behaviour of a wheel/rail system[J]. Vehicle System Dynamics, 2012, 50(12):1817-1834. |
| [4] | MA Weihua, SONG Rongrong, LUO Shihui. Study on the mechanism of the formation of polygon-shaped wheels on subway vehicles[J]. Proceedings of the Institution of Mechanical Eegineers Part F-Journal of Rail and Rapid Transit, 2016, 230(1):129-137. |
| [5] | CUI X L, CHEN G X, YANG H G, et al. Effect of the wheel/rail contact angle and the direction of the saturated creep force on rail corrugation[J]. Wear, 2015, 330-331:554-562. |
| [6] | CUI X L, CHEN G X, YANG H G, et al. Study on rail corrugation of a metro tangential track with Cologne-egg type fasteners[J]. Vehicle System Dynamics, 2016, 54(3):353-369. |
| [7] | HU W P, WANG P, CHEN G X, et al. Experimental study on corrugation of a sliding surface caused by frictional self-Excited vibration[J].Tribology Transactions, 2016, 59(1):8-16. |
| [8] | BROCKLEYCA. An investigation of rail corrugation using friction-induced vibration theory[J]. Wear, 1988, 128:99-106. |
| [9] | 张立民,张卫华. 轮轨波磨形成机理与再现试验[J]. 西南交通大学学报,2005,40(4):435-439. ZHANG Limin, ZHANG Weihua. Mechanism and experimental formation of wheel/rail corrugation[J]. Journal of Southwest Jiaotong University, 2005, 40(4):435-439. |
| [10] | 伍曾,刘学毅,姚令侃. 钢轨波磨的分形描述及动力仿真分析[J]. 西南交通大学学报,2009,44(5):722-725. WU Zeng, LIU Xueyi, YAO Lingkan. Fractal decription of rail corrugation and its dynamic simulation[J]. Journal of Southwest Jiaotong University, 2009, 44(5):722-725. |
| [11] | 熊嘉阳,邓永权,曹亚博,等. 重载铁路轮轨磨耗及其对安全运行的影响[J]. 西南交通大学学报,2014,49(2):302-309. Xiongjiayang, DENG Yongquan, CAO Yabo, et al. Wheel-rail wear on heavy haul lines and its influences on running stability of trains[J]. Journal of Southwest Jiaotong University, 2014, 49(2):302-309. |
| [12] | BROMMUNDT E. A simple mechanism for the polygonalization of railway wheels by wear[J]. Mechanics Research Communication, 1997, 24(4):435-442. |
| [13] | OUYANG H, NACK W, YUAN Y, et al. Numerical analysis of automotive disc brake squeal:a review[J]. International Journal of Vehicle Noise and Vibration, 2005, 1(3/4):207-231. |
| [14] | QIAN W J, CHEN G X, OUYANG H, et al. A transient dynamic study of the self-excited vibration of a railway wheelset-track system induced by saturated creep forces[J]. Vehicle System Dynamics, 2014, 52(9):1115-1138. |
| [15] | AREIZA Y A, GARCéS S I, SANTA J F, et al. Field measurement of coefficient of friction in rails using a hand-pushed tribometer[J]. Tribology International, 2015, 82:274-279. |
| [16] | 顾小山. CRH2型动车组制动系统防滑控制的优化[J]. 铁路计算机应用,2015,10:41-43,46. GU Xiaoshan. Optimization of anti-skid control method for braking system of CRH2 EMU[J]. Method and Application, 2015, 10:41-43,46. |
| [17] | NIELSEN J C O, JOHANSSON A. Out-of-round railway wheels-A literature survey[J]. Proceedings of Institute of Mechanical Engineer, Part F:Journal of Rail Rapid Transit, 2000, 214:79-91. |
| [18] | MORYS B. Enlargement of out-of-round wheel profiles on high speed trains[J]. Journal of Sound and Vibration, 1999, 227(5):965-978. |
| [19] | MEINKE P, MEINKE S. Plolygonalization of wheel treads caused by static and dynamic imbalances[J]. Journal of Sound and Vibration, 1999, 227(5):979-986. |
| [20] | 陈光雄,金学松,邬平波,等. 车轮非圆磨耗机理的有限元研究[J]. 铁道学报,2011,01:14-18. CHEN Guangxiong, JIN Xuesong, WU Pingbo, et al. Finite element study on the generation mechanism of polygonal wear of railway wheels[J]. Journal of the China Railway Society, 2011, 01:14-18. |
| [21] | YUAN Y. An eigenvalue analysis approach to brake squeal problem[C]//Proceedings of the 29th ISATA Conference Automotive Braking Systems. Florence:, 1996:337-344. |
| [22] | CHEN G X, ZHOU Z R, OUYANG H, et al. A finite element study on rail corrugation based on saturated creep force-induced self-excited vibration of a wheelset-track system[J]. Journal of Sound and Vibration, 2010, 329:4643-4655. |
