全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
-  2015 

多孔颗粒状HAPw/n-ZnO复合材料的制备工艺研究
Preparation of Porous Granular HAPw/n-ZnO Composite Materials

Keywords: HAPw/n-ZnO复合材料,造孔剂法,多孔材料,PMMA,
HAPw/n-ZnO materials
,Pore-forming agent,Porous materials,PMMA

Full-Text   Cite this paper   Add to My Lib

Abstract:

摘要 目的:将粉末状羟基磷灰石晶须纳米氧化锌(HAPw/ n-ZnO)复合材料制备成多孔颗粒状。方法:以HAPw/n-ZnO复合材料为原料,加入硅溶胶在不同温度下煅烧并借X射线衍射(XRD)分析确定硅溶胶与HAPw/n-ZnO发生化学反应的温度。再加入控制粒径100~250 μm的造孔剂聚甲基丙烯酸甲酯(PMMA)及30wt%的硅溶胶为粘接剂,以魔芋萄甘聚糖(KGM)凝胶冷压过模成型烧结后粉碎过筛,应用X射线衍射、扫描电镜、万能试验机、阿基米德排水法测试分析。结果:硅溶胶与HAPw/n-ZnO在高于600 ℃时会发生反应;烧结600 ℃保温2 h孔隙率最为理想;造孔剂含量为40 VOL%时孔隙率为64.2%,抗压缩强度为0.9 MPa。结论:造孔剂法可制备多孔HAPw/n-ZnO复合材料

References

[1]  Choi SH,Kim EG,Park JN, et al. Large-scale synthesis of hexagonalpyramid-shaped ZnO nanocrystals from thermolysis of Zn-oleatecomplex [J]. J Phys Chem B,2005,109(31)∶14792-14794
[2]  Hench. Bioceramics [J]. Am.Ceram,Soc,1998,81(7)∶1705-1728
[3]  Luo L X, Feng CG. linchan Huaxue Yu Gongye/Chemistry and Industry of Forest Products,2004,24∶83-86
[4]  Lm DM. Key Engineering Material s [J],1996,115∶209-232
[5]  Suge T, Ishikawa K,Kawasaki A, et al. Evaluation of postt-treatmentsolutions for clinical use with the calcium pHospHate precipitationmethod [J]. Hourna Dent,1999,27(7)∶487 -496
[6]  吴凤芹,李峰等.二氧化硅对氧化锌热稳定性的影响[J].无机盐工业, 2008,40(12)∶21-23
[7]  Ducheyne P,Beight J,GucklerJ,et al. Apreliminary study on osteoinduction of two kinds of calcium phosphate ceramics [J]. Biomaterials,1990,20∶1799
[8]  牛丽娜,陈吉华,方明,等.不同形貌氧化锌对复合树脂抗变异链球菌活性的影响[J].华西口腔医学杂志,2009,27(2)∶210-212
[9]  杨立斗 孙帆 王刚,等.羟基磷灰石晶须/纳米氧化锌抗菌人工复合体体外极限降解实验[J].昆明医科大学学报,2014,35(5)∶24-28
[10]  刘静,母瑞虹,黄洁.含碳酸氟羟磷灰石新型抛光牙膏的临床应用观察[J].北京口腔医学,2002,10(2)∶82
[11]  Hench Larry L. J Am Ceram Soc[J],1998, 81 (7)∶1705- 1728

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133