李梁,周伟,常晓林,等.高寒地区粉煤灰混凝土温控动态控制精细模拟[J].华中科技大学学报(自然科学版),2015,43(7):6-11.Li Liang,Zhou Wei,Chang Xiaolin,et al.Precise simulation of fly ash concrete’s temperature dynamic control in high and cold areas[J].Journal of Huazhong University of Science and Technology(Nature Science Edition),2015,43(7):6-11.
[2]
刘亚军,段亚辉,严敏,等.垫层浇筑完工后停工时长对坝体温度应力的敏感性分析[J].中国农村水利水电,2007,(10):71-75.Liu Yajun,Duan Yahui,Yan Ming,et al.The sensitive analysis of effect of pause interval on dam-body thermal stress after the cushion construction[J].China Rural Water and Hydropower,2007,(10):71-75.
[3]
朱伯芳,许平.碾压混凝土重力坝的温度应力与温度控制[J].水利水电技术,1996,(4):18-25.Zhu Bofang,Xu Ping.Temperature stress and temperature control of RRC gravity dam[J].Water Resources and Hydropower Engineering,1996,(4):18-25.
[4]
孙伟,何蕴龙.基于改进遗传算法的垫层区混凝土热学参数反演和早期裂缝成因分析[J].武汉大学学报(工学版),2014,47(2):193-200.Sun Wei,He Yunlong.Inversion analysis of thermal parameters of cushion concrete and reasons of early stage cracks based on improved genetic algorithms[J].Engineering Journal of Wuhan University,2014,47(2):193-200.
[5]
姜国辉,沈冰,李玉清.白石水库碾压混凝土重力坝基础垫层混凝土裂缝的原因分析[J].沈阳农业大学学报,2005,36(3):82-85.Jiang Guohui,Shen Bing,Li Yuqing.A discussion on the bedding layer concrete cracks of roller compacted concrete gravity dam of Baishi reservoir[J].Journal of Shenyang Agricultural University,2005,36(3):82-85.
[6]
王振红,朱岳明,于书萍.薄壁混凝土结构施工期温控防裂研究[J].西安建筑科技大学学报(自然科学版),2007,(6):773-778.Wang Zhenhong,Zhu Yueming,Yu Shuping.Study on temperature control and crack prevention of thinwalled concrete structures during the construction period[J].Journal of Xi’an University of Architecture&Technology(Natural Science Edition),2007,(6):773-778.
[7]
段寅,向正林,常晓林,等.大体积混凝土水管冷却热流耦合算法与等效算法对比分析[J].武汉大学学报(工学版),2010,43(6):703-707.Duan Yin,Xiang Zhenglin,Chang Xiaolin.Comparative analysis of pipe cooling in mass concrete using thermalfluid coupling method and equivalent method based on FEM[J].Engineering Journal of Wuhan University,2010,43(6):703-707.
[8]
刘杏红,马刚,常晓林,等.基于热-流耦合精细算法的大体积混凝土水管冷却数值模拟[J].工程力学,2012,29(8):159-164.Liu Xinghong,Ma Gang,Chang Xiaolin,et al.The refined numerical simulation of pipe cooling in mass concrete based on heat-fluid coupling method[J].Engineering Mechanics,2012,29(8):159-164.
[9]
Liu X,Duan Y,Zhou W,et al.Modeling the piped water cooling of a concrete dam using the heat-fluid coupling method[J].Journal of Engineering Mechanics,2012,139(9):1278-1289.
[10]
Liu Xinghong,Zhang Chao,Chang Xiaolin,et al.Precise simulation analysis of thermal field in mass concrete with pipe water cooling system[J].Applied Thermal Engineering,2015,78:449-459.
[11]
Dittus F W,Boelter L M K.Heat transfer in automobile radiators of the tubular type[J].International Communications in Heat and Mass Transfer,1985,12(1):3-22.
[12]
McAdams W H.Heat Transmission[M].3rd ed.New York:McGraw-Hill,1954.
[13]
焦石磊,段亚辉,张军.泄洪洞有压段衬砌混凝土温度应力洒水对流系数敏感性分析[J].中国农村水利水电,2012,(9):115-119.Jiao Shilei,Duan Yahui,Zhang Jun.A sensitivity analysis of sprinkler convection coefficients for pressure segments of spillway tunnel lining concrete[J].China Rural Water and Hydropower,2012,(9):115-119.
