郭会珍,谭长均,陈俊峰.基于ADAMS的行星轮系动力学仿真[J].机械传动,2013,37(5):86-89.Guo Huizhen,Tang Changjun,Chen Junfeng.Dynamics simulation of planetary gear train based on ADAMS[J].Journal of Mechanical Transmission,2013,37(5):86-89.
[2]
龙凯,程颖.齿轮啮合力仿真计算的参数选取研究[J].计算机仿真,2002,19(6):87-88.Long Kai,Chen Ying.The research of parameters by the simulation of exciting force in gears[J].Computer Simulation,2002,19(6):87-88.
[3]
高广娣.典型机械机构ADAMS仿真应用[M].北京:电子工业出版社,2013:102-106.Gao Guangdi.Simulation Application of ADAMS in Typical Mechanica Mechanism[M].Beijing:Electronics Industry Press,2013:102-106.
[4]
Kahraman K.Planetary gear train dynamics[J].Jourmal of Mechanical Design,1994,116(9):712-720.
[5]
刘丹.小模数渐开线少齿差减速器的设计及其传动特性研究[D].哈尔滨:哈尔滨工业大学,2012.Liu Dan.Design of fine-pitch involute gear reducer with small tooth difference and reseach on its transmission characteristics[D].Harbin:Harbin Institute of Technology,2012.
[6]
罗庆生,韩宝玲,潘春荣.精密小模数少齿差齿轮齿形的设计与加工[J].机械传动,2000,24(4):35-37.Luo Qingsheng,Han Baoling,Pan Chunrong.The design and manufacture of the precise gear with small module and small tooth number[J].Journal of Mechanical Transmission,2000,24(4):35-37.
[7]
陈华峰.ADAMS2012虚拟样机技术从入门到精通[M].北京:清华大学出版社,2013:14-23.Cheng Huafeng.ADAMS 2012 Virtual Prototyping Technology from Entry to the Master[M].Beijing:Tsinghua University Press,2013:14-23.
[8]
孙恒.机械原理[M].北京:高等教育出版社,2006:214-229.Sun Heng.Theory of Machines and Mechanisms[M].Beijing:Higher Education Press,2006:214-299.
[9]
濮良贵,纪名刚.机械设计[M].北京:高等教育出版社,2006:198-199.Pu Lianggui,Ji Minggang.Design of Machinery[M].Beijing:Higher Education Press,2006:198-199.
[10]
朱景梓.齿数差Z=1的渐开线K-H-V型行星齿轮减速器及其设计[J].太原工学院学报,1963,(4):13-42.Zhu Jingzi.Involute K-H-V planetary gear reducer and its design of the differential gear Z=1[J].Journal of Taiyuan Institute of Technology,1963,(4):13-42.
[11]
郑红梅,付彬,史越.N型少齿差行星减速器动力学仿真研究[J].机械传动,2013,37(11):89-93.Zheng Hongmei,Fu Bin,Shi Yue.Dynamics simulation research of planetary reduction gear with small tooth deference[J].Journal of Mechanical Transmission,2013,37(11):89-93.
[12]
于波,王家序,黄春美,等.基于ADAMS的孔销式少齿差行星减速器的设计与仿真分析[J].机械设计与研究,2013,29(3):23-27.Yu Bo,Wang Jiaxu,Huang Chunmei,et al.The design and simulation analysis of hole-pin type few teeth difference lanet-gaer speed reducer based on ADAMS[J].Journal of Machine Design and Research,2013,29(3):23-27.
[13]
刘丹,唐德威,邓忠全,等.少齿差齿轮传动承载能力分析及体积优化[J].机械设计与制造,2012,(12):39-41.Liu Dan,Tang Dewei,Deng Zhongquan,et al.An analysis of load-bear capacity of gearing with small teeth number difference and volume optimization[J].Machinery Design and Manufacture,2012,(12):39-41.
