Dodd L,Restrepo-Posada J I.Model for predicting cyclic behavior of reinforcing steel[J].Journal of Structure Engineering,ASCE,1995,121(3):433-445.
[2]
Monti G,Nuti C.Nonlinear cyclic behavior of reinforcing bars including buckling[J].Journal of Structural Engineering,ASCE,1992,118(12):3268-3284.
[3]
曲哲,叶列平.基于有效积累滞回耗能的钢筋混凝土构件承载力退化模型[J].工程力学,2011,28(6):45-47.Qu Zhe,Ye Lieping.Strength deterioration model based on effective hysteretic energy dissipation for RC members under cyclic loading[J].Engineering Mechanics,2011,28(6):45-47.
[4]
Seckin M.Hysteretic behavior of cast-in-place exterior beam column-slab subassemblies[D].Toronto:University of Toronto,1981.
[5]
Megotto M,Pinto P E.Method of analysis for cyclically loaded reinforced concrete plane frames including changes in geometry and non-elastic behavior of blements under combined normal force and bending[C]//Proceedings of the Conference on Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads,IABSE Reports Vol.13,Lisbon,1973:15-22.
[6]
Vecchio F J.Towards cyclic load modeling of reinforced concrete[J].ACI Structural Journal,1999,96(2):192-202.
[7]
Filippou F C,Popov E P,Bertero V V.Effects of bond deterioration on hysteretic behavior of reinforced concrete joints[R].University of California,Berkeley,1983.
[8]
Gomes A,Appleton J.Nonlinear cyclic stress strain relationship of reinforcing bars including buckling[J].Engineering Structures,1997,19(10):822-826.
[9]
Clough R W.Effect of stiffness degradation on earthquake ductility requirements[R].University of California,Berkeley,1966.
[10]
方自虎,周海俊,赖少颖,等.循环荷载下钢筋混凝土ABAQUS黏结滑移单元[J].武汉大学学报(工学版),2014,47(2):527-531.Fang Zihu,Zhou Haijun,Lai Shaoying,et al.ABAQUS bond stress-slip element of reinforced concrete under cyclic loads[J].Engineering Journal of Wuhan University,2014,47(4):527-531.
[11]
Youssef M,Ghobarah A.Strength deterioration due to bond slip and concrete crushing in modeling of reinforced concrete members[J].ACI Structural Journal,1999,96(6):956-968.
[12]
Park R,Milburn J R.Comparison of recent New Zealand and United States seismic design provisions for reinforced concrete beam-column joints and test results from four units designed according to the New Zealand code[J].Bulletin of the New Zealand National Society for Earthquake Engineering,1983,16(1):3-24.
[13]
方自虎,简旭阳,周尧,等.考虑屈曲的钢筋滞回模型[J].武汉大学学报(工学版),2016,49(2):254-258.Fang Zihu,Jian Xuyang,Zhou Yao,et al.Hysteretic model of reinforced bar considering bulking[J].Engineering Journal of Wuhan University,2016,49(2):254-258.
[14]
Dhakal R,Maekawa K.Modelling for post yielding buckling of reinforcement[J].Journal of Structural Engineering,ASCE,2002,128(9):1139-1147.
[15]
Ang B G.Ductility of reinforced concrete bridge piers under seismic loading[D].University of Canterbury,1981.
[16]
Ma S M,Bertero V V,Popov E P.Experimental and analytical studies on the hysteretic behavior of reinforced concrete rectangular and T-beams[R].University of California,Berkeley,1976.
[17]
Qu Z.Predicting nonlinear response of an RC bridge pier subject to shake table motions[C]//Proc.9th International Conference on Urban Earthquake Engineering(9CUEE),Tokyo,Japan:1717-1724.
[18]
方自虎,谢强,周尧,等.循环荷载下MCFT混凝土结构模型[J].地震工程与工程振动,2015,35(3):73-78.Fang Zihu,Xie Qiang,Zhou Yao,et al.MCFT model of concrete structures subjected to cyclic loading[J].Earthquake Engineering and Engineering Dynamics,2015,35(3):73-78.
[19]
Durrani A J,Wight J K.Experimental and analytical study of internal beam to column connections subjected to reversed cyclic loading[R].Michigan:University of Michigan,1982.
[20]
Osterle R G,Florato A E,Johal L S,et al.Earthquake resistant structural walls—tests of isolated walls[R].Construction Technology Laboratories,Portland Cement Association,Illinois,1976.
