徐元哲,王乐天,刘冬雪,等.电力电缆接头测温系统的设计[J].高电压技术,2009,35(12):2977-2982.Xu Yuanzhe,Wang Letian,Liu Dongxue,et al.Design of temperature measurement system for power cable junction based on FBG[J].High Voltage Engineering,2009,35(12):2977-2982.
[2]
杨文英.电力电缆温度在线监测系统的研究[D].吉林:东北电力大学,2008.Yang Wenying.Studying on the on-line temperature monitoring system for power cable[D].Jilin:Northeast Dianli University,2008.
[3]
梁永春,李延沐,李彦明,等.利用模拟热荷法计算地下电缆稳态温度场[J].中国电机工程学报,2008,28(16):129-134.Liang Yongchun,Li Yanmu,Li Yanming,et al.Calculation of the static temperature field of underground cables using heat charge simulation method[J].Proceedings of the CSEE,2008,28(16):129-134.
[4]
珞灵琳.电缆暂态温度场及载流量实时计算方法的研究[D].重庆:重庆大学,2008.Luo Linglin.Study on the transient-state temperature field and ampacity real-time caculation method of single core cable[D].Chongqing:Chongqing University,2008.
[5]
王有元,陈仁刚,陈伟根,等.有限元法计算地下电缆稳态温度场及其影响因素[J].高电压技术,2009,35(12):3086-3092.Wang Youyuan,Chen Rengang,Chen Weigen,et al.Calculation of static temperature field of buried cable based on FEM and analysis of influential factors[J].High Voltage Engineering,2009,35(12):3086-3092.
[6]
马国栋.电线电缆载流量[M].北京:中国电力出版社,2013.Ma Guodong.Capacity of Transmission Line and Cables[M].Beijing:China Electric Power Press,2013.
[7]
梁永春.高压电力电缆载流量数值计算[M].北京:国防工业出版社,2012.Liang Yongchun.Numercial Calculation of High Voltage Power Cable Capacity[M].Beijing:National Defence Industry Presss,2012.
[8]
GB 50217-2007电力工程电缆设计规范[S].北京:中国计划出版社,2007.GB 50217-2007Code for Design of Cables of Electric Engineering[S].Beijing:Chins Planning Press,2007.
[9]
DL/T 5221-2005城市电力电缆线路设计技术规定[S].北京:中国电力出版社,2005.DL/T 5221-2005Technical Code for the Design of Urban Power Cables[S].Beijing:China Electric Power Press,2005.
[10]
IEC60287-1Calculation of the Current Rating,Part 1:Current Rating Equations(100%Load Factor)and Calculation of Losses[S],2001.
[11]
唐科,文武,丁俊杰,等.基于有限元法的电缆接头温度场仿真[J].电力建设,2016,37(2):145-150.Tang Ke,Wen Wu,Ding Junjie,et al.Temperature field simulation of cable joints based on FEM[J].Electric Power Construction,2016,37(2):145-150.
[12]
杨延明.基于有限元法的电力电缆载流量计算[D].哈尔滨:哈尔滨理工大学,2012.Yang Yanming. Power cable ampacity calculation based on finite element method[D].Harbin:Harbin University of Science and Technology,2012.
[13]
张洪麟,唐军,陈伟根,等.基于有限元法的地下电缆群温度场及载流量的仿真计算[J].高压电器,2010,46(2):42-51.Zhang Honglin,Tang Jun,Chen Weigen,et al.Simulation of temperature field and ampacity of underground cable system based on finite element method[J].High Voltage Apparatus,2010,46(2):42-51.
[14]
刘刚,雷成华,刘毅刚.根据电缆表面温度推算导体温度的热路简化模型暂态误差分析[J].电网技术,2011,35(4):212-217.Liu Gang,Lei Chenghua,Liu Yigang.Analysis on transient error of simplified thermal circuit model for calculating conductor temperature by cable surface temperature[J].Power System Technology,2011,35(4):212-217.
[15]
于建立,常树生,牛远方,等.地下电力电缆温度场及载流量的数值计算[J].东北电力大学学报,2008,28(4):62-65.Yu Jianli,Chang Shusheng,Niu Yuanfang,et al.Numerical simulation of thermal fields and ampacity of underground power cables[J].Journal of Northeast Dianli University,2008,28(4):62-65.
[16]
周晓虎,周秧,唐雷,等.直埋电力电缆温度场计算模型[J].电线电缆,2007,(5):33-36.Zhou Xiaohu,Zhou Yang,Tang Lei,et al.Mathematical model for calculation of the temperature profile in buried power cables[J].Electric Wire&Cable,2007,(5):33-36.
[17]
IEC60287-3Calculation of the Current Rating,Part 3:Sections on Operating Conditions[S],1999.
[18]
梁永春,柴进爱,李彦明,等.有限元法计算交联电缆涡流损耗[J].高电压技术,2007,33(9):196-199.Liang Yongchun,Cai Jinai,Li Yanming,et al.Calculation of eddy current losses in XLPE cables by FEM[J].High Voltage Engineering,2007,33(9):196-199.
[19]
IEC60287-2Calculation of the Current Rating,Part 2:Thermal Resistance[S],2001.
[20]
徐妍,王丽娜,李艳飞.电缆温度场的有限元分析[J].黑龙江电力,2011,33(1):31-36.Xu Yan,Wang Lina,Li Yanfei.Analysis of temperature field of the cable based on FEM[J].Heilongjiang Electric Power,2011,33(1):31-36.
