Peng W,Cao X.Numerical prediction of erosion distributions and solid particle trajectories in elbows for gas-solid flow[J].Journal of Natural Gas Science&Engineering,2016,30:455-470.
[2]
肖惠民.基于数值波浪水槽的波力直驱水轮机前导流口体型优选[J].武汉大学学报(工学版),2017,50(1):125-128.Xiao Huimin.Configuration selection of front guide inlet for direct driving turbine based on numerical wave tank[J].Engineering Journal of Wuhan University,2017,50(1):125-128.
[3]
Tilly G P.Erosion caused by impact of solid particles[J].Treatise on Materials Science&Technology,1979,13:287-319.
[4]
Edwards J K,Mclaury B S,Shirazi S A.Modeling solid particle erosion in elbows and plugged Tees[J].Journal of Energy Resources Technology,2001,123(4):277-284.
[5]
丁矿,朱宏武,张建华,等.直角弯管内液固两相流固体颗粒冲蚀磨损分析[J].油气储运,2013,32(3):241-246.Ding Kuang,Zhu Hongwu,Zhang Jianhua,et al.Erosion wear analysis of solid particles in liquid-solid two-phase flow of right-angle bend pipe[J].Oil and Gas Storage and Transportation,2013,32(3):241-246.
[6]
Zeng L,Zhang G A,Guo X P.Erosion-corrosion at different locations of X65carbon steel elbow[J].Corrosion Science,2014,85:318-330.
[7]
Sommerfeld M,Huber N.Experimental analysis and modelling of particle-wall collisions[J].International Journal of Multiphase Flow,1999,25(6-7):1457-1489.
[8]
Oka Y I,Okamura K,Yoshida T.Practical estimation of erosion damage caused by solid particle impact:Part1:Effects of impact parameters on a predictive equation[J].Wear,2005,259:95-101.
[9]
Oka Y I,Yoshida T.Practical estimation of erosion damage caused by solid particle impact:Part 2:Mechanical properties of materials directly associated with erosion damage[J].Wear,2005,259:102-109.
[10]
Zhang Y,Reuterfors E P,Mclaury B S,et al.Comparison of computed and measured particle velocities and erosion in water and air flows[J].Wear,2007,263:330-338.
[11]
Vieira R E,Mansouri A,Mclaury B S,et al.Experimental and computational study of erosion in elbows due to sand particles in air flow[J].Powder Technology,2015,288:339-353.
[12]
Neilson J H,Gilchrist A.Erosion by a stream of solid particles[J].Wear,1968,11(2):111-122.
[13]
Ahlert K R.Effects of Particle Impingement Angle and Surface Wetting on Solid Particle Erosion of AISI1018Steel[M].University of Tulsa,1994.
[14]
Veritas D N.Erosive Wear in Piping Systems[S].1996.
[15]
杨秀萍,任军,张喆,等.正弦风场新月形覆冰导线动态气动力特性[J].武汉大学学报(工学版),2017,50(2):285-289.Yang Xiuping,Ren Jun,Zhang Zhe,et al.Dynamic aerodynamic characteristics of iced conductor with crescent shape under sine wind field[J].Engineering Journal of Wuhan University,2017,50(2):285-289.
[16]
Grant G,Tabakoff W.Erosion prediction in turbomachinery resulting from environmental solid particles[J].Journal of Aircraft,1975,12(5):471-478.
[17]
Forder A,Thew M,Harrison D.A numerical investigation of solid particle erosion experienced within oilfield control valves[J].Wear,1998,216(2):184-193.
[18]
Haider A,Levenspiel O.Drag coefficient and terminal velocity of spherical and nonspherical particles[J].Powder Technology,1989,58(1):63-70.
