楼板局部设缝框架结构概率地震需求分析

楼板局部设缝框架通过在梁端设置贯穿楼板的通缝将楼板内纵筋与框架梁端分离，以实现“强柱弱梁”屈服机制.本文基于概率地震需求分析方法对该楼板局部设缝方法进行研究.首先利用楼板局部设缝框架振动台试验数据，验证采用OpenSees进行动力有限元分析的合理性；在此基础上，建立纯框架、传统框架、楼板局部设缝框架数值模型，选取22条地震动记录，对三种框架进行概率地震需求分析，从概率层面探究楼板和楼板局部设缝对框架结构抗震性能的影响.分析表明：楼板局部设缝可在一定程度上改善含现浇楼板框架结构的屈服机制，削弱现浇楼板带来的不利影响，提高传统框架的抗震性能以及结构的抗地震倒塌能力.
To implement the seismic design principle of “strong column and weak beam”，frame structure with local slot in floor slab is designed, where the continuous slot penetrating through the slab along the beam ends was set to separate the longitudinal reinforcement in the slab from the beam ends. Based on the probabilistic seismic demand analysis method, frame structure with local slot in floor slab was investigated. To investigate the accuracy of numerical model, shaking table test data was utilized to verify the calculated data of frame structure with local slot in floor slab modelling by the finite element software, OpenSees. The numerical models of frame structure without slab, conventional frame structure with cast-in-place slab, and frame structure with local slot in floor slab were established subsequently. Seismic performance was studied to explore the effect of the local slot of floor slab in the viewpoint of probability based on the probabilistic seismic demand analysis，which used 22 seismic ground motions. The results showed that the cast-in-place floor slab decreased the seismic performance. Besides，the slot in floor slab weakened the adverse influence of cast-in-place floor slab and increased the seismic performance and collapse-resistant capacity of frame structure.