全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
-  2016 

锂离子电池硅基负极材料的最新研究进展
Research Progress of Si-based Anode Materials for Lithium-ion Batteries

DOI: 10.13208/j.electrochem.160543

Keywords: 锂离子电池,负极,多孔硅基复合材料,粘结剂,纳米硅电极,电解液添加剂,

Full-Text   Cite this paper   Add to My Lib

Abstract:

摘要 硅基材料因具有目前最高的理论比容量、合适的嵌锂平台、大储量等优点,引起了众多研究者的关注,成为最具潜力的下一代锂离子电池的负极材料. 但是硅在嵌锂过程中巨大的体积变化,容易破坏电极结构的稳定性,使电极循环性能迅速衰减,这对硅基材料的应用造成了很大的阻碍. 本文主要针对近年来在硅电极自身的结构(包括:多孔硅基复合材料的合成、硅粘结剂的选择,无粘结剂的纳米硅电极的制备)以及电解液添加剂的选择两大方面的最新研究进展进行总结与评述.
Owing to its high theoretical specific capacity (4200 mAh·g-1), silicon is a promising candidate to replace graphite as the anode in lithium ion batteries (LIBs). However, low intrinsic electric conductivity and dramatic volume change (~ 300%) during the process of lithiation and delithiation result in electrode pulverization and capacity loss with cycling, accordingly, the application of silicon as an anode in LIBs has been severely hindered. We will discuss the structure of silicon electrode including synthesis of Si-based composites,the selection of binder for silicon and the fabrication of binder-free Si-based electrode, as well as the electrolyte additive to improve the cycle performance of the battery

References

[1]  Dunn B, Kamath H, Tarascon J M. Electrical Energy Storage for the Grid: A Battery of Choices[J]. Science, 2011, 334(6058): 928-935.
[2]  Winter M, Besenhard J O. Electrochemical lithiation of tin and tin-based intermetallics and composites[J]. Electrochimica Acta, 1999, 45(1-2): 31-50.
[3]  Kasavajjula U, Wang C, Appleby A J. Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells[J]. Journal of Power Sources, 2007, 163(2): 1003-1039.
[4]  Luo F, Chu G, Xia X X, et al. Thick solid electrolyte interphases grown on silicon nanocone anodes during slow cycling and their negative effects on the performance of Li-ion batteries[J]. Nanoscale, 2015, 7(17): 7651-7658.
[5]  Liu X H, Zhong L, Huang S, et al. Size-Dependent Fracture of Silicon Nanoparticles During Lithiation[J]. Acs Nano, 2012, 6(2): 1522-1531.
[6]  Ng S H, Wang J, Wexler D, et al. Highly reversible lithium storage in spheroidal carbon-coated silicon nanocomposites as anodes for lithium-ion batteries[J]. Angewandte Chemie-International Edition, 2006, 45(41): 6896-6899.
[7]  Liu N, Lu Z, Zhao J, et al. A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes[J]. Nature Nanotechnology, 2014, 9(3): 187-192.
[8]  Shao D, Tang D P, Yang J W, et al. Nano-structured composite of Si/(S-doped-carbon nanowire network) as anode material for lithium-ion batteries[J]. Journal of Power Sources, 2015, 297: 344-350.
[9]  Lux S F, Schappacher F, Balducci A, et al. Low Cost, Environmentally Benign Binders for Lithium-Ion Batteries[J]. Journal of the Electrochemical Society, 2010, 157(3): A320-A325.
[10]  Komaba S, Ozeki T, Yabuuchi N, et al. Polyacrylate as Functional Binder for Silicon and Graphite Composite Electrode in Lithium-Ion Batteries[J]. Electrochemistry, 2011, 79(1): 6-9.
[11]  Maranchi J P, Hepp A F, Evans A G, et al. Interfacial properties of the a-Si/Cu : active-inactive thin-film anode system for lithium-ion batteries[J]. Journal of the Electrochemical Society, 2006, 153(6): A1246-A1253.
[12]  Yang Y, Chen D Q, Liu B, et al. Binder-Free Si Nanoparticle Electrode with 3D Porous Structure Prepared by Electrophoretic Deposition for Lithium-Ion Batteries[J]. Acs Applied Materials & Interfaces, 2015, 7(14): 7497-7504.
[13]  Yang Y, Li J Q, Chen D Q, et al. Binder-Free Carbon-Coated Silicon-Reduced Graphene Oxide Nanocomposite Electrode Prepared by Electrophoretic Deposition as a High-Performance Anode for Lithium-Ion Batteries[J]. Chemelectrochem, 2016, 3(5): 757-763.
[14]  Ding N, Xu J, Yao Y X, et al. Improvement of cyclability of Si as anode for Li-ion batteries[J]. Journal of Power Sources, 2009, 192(2): 644-651.
[15]  Nakai H, Kubota T, Kita A, et al. Investigation of the Solid Electrolyte Interphase Formed by Fluoroethylene Carbonate on Si Electrodes[J]. Journal of the Electrochemical Society, 2011, 158(7): A798-A801.
[16]  Chen L B, Wang K, Xie X H, et al. Effect of vinylene carbonate (VC) as electrolyte additive on electrochemical performance of Si film anode for lithium ion batteries[J]. Journal of Power Sources, 2007, 174(2): 538-543.
[17]  Choi N S, Yew K H, Lee K Y, et al. Effect of fluoroethylene carbonate additive on interfacial properties of silicon thin-film electrode[J]. Journal of Power Sources, 2006, 161(2): 1254-1259.
[18]  Kovalenko I, Zdyrko B, Magasinski A, et al. A Major Constituent of Brown Algae for Use in High-Capacity Li-Ion Batteries[J]. Science, 2011, 334(6052): 75-79.
[19]  Tarascon J M, Armand M. Issues and challenges facing rechargeable lithium batteries[J]. Nature, 2001, 414(6861): 359-367.
[20]  Li J, Dahn J R. An in situ X-ray diffraction study of the reaction of Li with crystalline Si[J]. Journal of the Electrochemical Society, 2007, 154(3): A156-A161.
[21]  Hatchard T D, Dahn J R. In situ XRD and electrochemical study of the reaction of lithium with amorphous silicon[J]. Journal of the Electrochemical Society, 2004, 151(6): A838-A842.
[22]  Jaumann T, Balach J, Klose M, et al. SEI-component formation on sub 5 nm sized silicon nanoparticles in Li-ion batteries: the role of electrode preparation, FEC addition and binders[J]. Physical Chemistry Chemical Physics, 2015, 17(38): 24956-24967.
[23]  Chen S, Gordin M L, Yi R, et al. Silicon core-hollow carbon shell nanocomposites with tunable buffer voids for high capacity anodes of lithium-ion batteries[J]. Physical Chemistry Chemical Physics, 2012, 14(37): 12741-12745.
[24]  Liu W R, Yang M H, Wu H C, et al. Enhanced cycle life of Si anode for Li-ion batteries by using modified elastomeric binder[J]. Electrochemical and Solid State Letters, 2005, 8(2): A100-A103.
[25]  Chong J, Xun S D, Zheng H H, et al. A comparative study of polyacrylic acid and poly(vinylidene difluoride) binders for spherical natural graphite/LiFePO4 electrodes and cells[J]. Journal of Power Sources, 2011, 196(18): 7707-7714.
[26]  Komaba S, Ozeki T, Okushi K. Functional interface of polymer modified graphite anode[J]. Journal of Power Sources, 2009, 189(1): 197-203.
[27]  Wang W, Kumta P N. Nanostructured Hybrid Silicon/Carbon Nanotube Heterostructures: Reversible High-Capacity Lithium-Ion Anodes[J]. Acs Nano, 2010, 4(4): 2233-2241.
[28]  Chan C K, Peng H L, Liu G, et al. High-performance lithium battery anodes using silicon nanowires[J]. Nature Nanotechnology, 2008, 3(1): 31-35.
[29]  Graetz J, Ahn C C, Yazami R, et al. Highly reversible lithium storage in nanostructured silicon[J]. Electrochemical and Solid State Letters, 2003, 6(9): A194-A197.
[30]  Li H, Lu C, Zhang B. A straightforward approach towards Si@C/graphene nanocomposite and its superior lithium storage performance[J]. Electrochimica Acta, 2014, 120: 96-101.
[31]  Li H, Huang X J, Chen L Q, et al. The crystal structural evolution of nano-Si anode caused by lithium insertion and extraction at room temperature[J]. Solid State Ionics, 2000, 135(1-4): 181-191.
[32]  Yue L, Zhang W H, Yang J F, et al. Designing Si/porous-C composite with buffering voids as high capacity anode for lithium-ion batteries[J]. Electrochimica Acta, 2014, 125: 206-217.
[33]  Hu Y S, Demir-Cakan R, Titirici M M, et al. Superior storage performance of a Si@SiOx/C nanocomposite as anode material for lithium-ion batteries[J]. Angewandte Chemie-International Edition, 2008, 47(9): 1645-1649.
[34]  Jia H P, Gao P F, Yang J, et al. Novel Three-Dimensional Mesoporous Silicon for High Power Lithium-Ion Battery Anode Material[J]. Advanced Energy Materials, 2011, 1(6): 1036-1039.
[35]  Wu J X, Qin X Y, Zhang H R, et al. Multilayered silicon embedded porous carbon/graphene hybrid film as a high performance anode[J]. Carbon, 2015, 84: 434-443.
[36]  Feng X J, Yang J, Bie Y T, et al. Nano/micro-structured Si/CNT/C composite from nano-SiO2 for high power lithium ion batteries[J]. Nanoscale, 2014, 6(21): 12532-12539.
[37]  Magasinski A, Zdyrko B, Kovalenko I, et al. Toward Efficient Binders for Li-Ion Battery Si-Based Anodes: Polyacrylic Acid[J]. Acs Applied Materials & Interfaces, 2010, 2(11): 3004-3010.
[38]  Liu J, Zhang Q, Zhang T, et al. A Robust Ion-Conductive Biopolymer as a Binder for Si Anodes of Lithium-Ion Batteries[J]. Advanced Functional Materials, 2015, 25(23): 3599-3605.
[39]  Roy A K, Zhong M J, Schwab M G, et al. Preparation of a Binder-Free Three-Dimensional Carbon Foam/Silicon Composite as Potential Material for Lithium Ion Battery Anodes[J]. Acs Applied Materials & Interfaces, 2016, 8(11): 7343-7348.
[40]  Lee J T, Lin Y W, Jan Y S. Allyl ethyl carbonate as an additive for lithium-ion battery electrolytes[J]. Journal of Power Sources, 2004, 132(1-2): 244-248.
[41]  Sethuraman V A, Chon M J, Shimshak M, et al. In situ measurements of stress evolution in silicon thin films during electrochemical lithiation and delithiation[J]. Journal of Power Sources, 2010, 195(15): 5062-5066.
[42]  Beaulieu L Y, Eberman K W, Turner R L, et al. Colossal reversible volume changes in lithium alloys[J]. Electrochemical and Solid State Letters, 2001, 4(9): A137-A140.
[43]  Huang K L(黄可龙),Wang Z X(王兆翔),Liu S Q(刘素琴). 锂离子电池原理与关键技术[M]. Beijing: Chemical Industry Press (化学工业出版社), 2007: 232-240.
[44]  Ryu I, Choi J W, Cui Y, et al. Size-dependent fracture of Si nanowire battery anodes[J]. Journal of the Mechanics and Physics of Solids, 2011, 59(9): 1717-1730.
[45]  Liu N, Wu H, McDowell M T, et al. A Yolk-Shell Design for Stabilized and Scalable Li-Ion Battery Alloy Anodes[J]. Nano Letters, 2012, 12(6): 3315-3321.
[46]  Liu J, Kopold P, van Aken P A, et al. Energy Storage Materials from Nature through Nanotechnology: A Sustainable Route from Reed Plants to a Silicon Anode for Lithium-Ion Batteries[J]. Angewandte Chemie-International Edition, 2015, 54(33): 9632-9636.
[47]  He Y S, Gao P F, Chen J, et al. A novel bath lily-like graphene sheet-wrapped nano-Si composite as a high performance anode material for Li-ion batteries[J]. Rsc Advances, 2011, 1(6): 958-960.
[48]  Komaba S, Yabuuchi N, Ozeki T, et al. Comparative Study of Sodium Polyacrylate and Poly(vinylidene fluoride) as Binders for High Capacity Si-Graphite Composite Negative Electrodes in Li-Ion Batteries[J]. Journal of Physical Chemistry C, 2012, 116(1): 1380-1389.
[49]  Li H X, Cheng F Y, Zhu Z Q, et al. Preparation and electrochemical performance of copper foam-supported amorphous silicon thin films for rechargeable lithium-ion batteries[J]. Journal of Alloys and Compounds, 2011, 509(6): 2919-2923.
[50]  Obrovac M N, Christensen L. Structural changes in silicon anodes during lithium insertion/extraction[J]. Electrochemical and Solid State Letters, 2004, 7(5): A93-A96.
[51]  Li Q L, Chen D Q, Li K, et al. Electrostatic self-assembly bmSi@C/rGO composite as anode material for lithium ion battery[J]. Electrochimica Acta, 2016, 202: 140-146.
[52]  Chen Z H, Christensen L, Dahn J R. Large-volume-change electrodes for Li-ion batteries of amorphous alloy particles held by elastomeric tethers[J]. Electrochemistry Communications, 2003, 5(11): 919-923.
[53]  Zheng H H, Yang R Z, Liu G, et al. Cooperation between Active Material, Polymeric Binder and Conductive Carbon Additive in Lithium Ion Battery Cathode[J]. Journal of Physical Chemistry C, 2012, 116(7): 4875-4882.
[54]  Aurbach D, Zinigrad E, Cohen Y, et al. A short review of failure mechanisms of lithium metal and lithiated graphite anodes in liquid electrolyte solutions[J]. Solid State Ionics, 2002, 148(3-4): 405-416.
[55]  Etacheri V, Haik O, Goffer Y, et al. Effect of Fluoroethylene Carbonate (FEC) on the Performance and Surface Chemistry of Si-Nanowire Li-Ion Battery Anodes[J]. Langmuir, 2012, 28(1): 965-976.
[56]  Brandt K. Historical Development of Secondary Lithium Batteries[J]. Solid State Ionics, 1994, 69(3-4): 173-183.
[57]  Bruce P G, Scrosati B, Tarascon J M. Nanomaterials for rechargeable lithium batteries[J]. Angewandte Chemie-International Edition, 2008, 47(16): 2930-2946.
[58]  Chen D Q, Liao W J, Yang Y, et al. Polyvinyl alcohol gelation: A structural locking-up agent and carbon source for Si/CNT/C composites as high energy lithium ion battery anode[J]. Journal of Power Sources, 2016, 315: 236-241.
[59]  Lee J H, Paik U, Hackley V A, et al. Effect of poly(acrylic acid) on adhesion strength and electrochemical performance of natural graphite negative electrode for lithium-ion batteries[J]. Journal of Power Sources, 2006, 161(1): 612-616.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133