|
|
- 2015
石墨烯/多孔纳米硅负极的电化学性能
|
Abstract:
摘要 采用酸浸蚀Al-Si合金的方法制备了多孔纳米Si，并用其制作以石墨烯为导电材料的石墨烯/多孔纳米Si负极. SEM和TEM的分析表明两者混合均匀. 作为锂离子电池的负极，该电极在1 mol？L-1 LiPF6/EC(碳酸乙烯酯):DMC(碳酸二甲酯) = 1:1(by volume) + 1.5%(by mass)VC(碳酸亚乙烯酯)溶液中、0.5 A？g-1电流密度下，第120周循环的放电比容量为1842.6 mAh？g-1，充放电效率为98.6%. 石墨烯的加入不仅提高了电极的导电性，而且减缓了充放电过程中电极多孔纳米结构的衰变.
Porous nano-silicon (Si) was prepared by acid etching Al-Si alloy powder method, and used as an active material for fabricating a grapene/porous nano-Si electrode. The results of SEM and TEM measurements indicated that porous nano-Si powder was uniformly mixed with graphene by emulsification dispersion-ultrasonication method. As an anode for lithium ion battery, the graphene/porous nano-Si electrode presented relatively high performance in 1 mol？L-1 LiPF6/EC:DMC = 1:1(by volume) + 1.5% (by mass) VC solution. At the charge and discharge current densities of 0.5A？g-1, the first discharge capacity was 1768.6 mAh？g-1 with coulombic efficiency of 68.3%. The discharge capacity increased in the initial several cycles, and then decayed gradually after 7 cycles. Finally, the discharge capacity was 1842.6 mAh？g-1 with coulombic efficiency of 98.6% after 120th cycles. The excellent cycle property could be attributed to the improvement of electronic conductivity and structural stability of graphene/porous nano-Si material
| [1] | Wu Z S, Ren W, Xu L, et al. Doped graphene sheets as anode materials with super high rate and large capacity for lithium ion batteries[J]. ACS nano, 2011, 5(7): 5463-5471. |
| [2] | Geim A K, Novoselov K S. The rise of graphene[J]. Nature materials, 2007, 6(3): 183-191. |
| [3] | Zhao X, Hayner C M, Kung M C, et al. In-plane vacancy-enabled high-power Si-graphene composite electrode for lithium-ion batteries[J]. Advanced Energy Materials, 2011, 1(6): 1079-1084. |
| [4] | Hao S J(郝世吉), Li C L(李纯莉), Zhu K(朱凯), et al. The Preparation of high performance porous silicon powder by use of etching Al-Si alloy with acid solution for lithium ion battery[J]. Journal of Electrochemistry(电化学), 2014, 20(1): 1-6. |
| [5] | Jiang Z Y, Li C L, Hao S J, et al. An easy way for preparing high performance porous silicon powder by etching Al-Si alloy powder for lithium ion battery[J]. Electrochimica Acta, 2014, 115: 393-398. |
| [6] | Li C L, Zhang P, Jiang Z Y. Effect of nano Cu coating on porous Si prepared by acid etching Al-Si alloy powder[J]. Electrochimica Acta, 2015, 161: 408-442. |
| [7] | Baek S H, Park J S, Bae E J, et al. Influence of the crystallographic orientation of silicon nanowires in a carbon matrix on electrochemical performance as negative electrode materials for lithium-ion batteries[J]. Journal of Power Sources, 2013, 24(4): 515 -520. |
| [8] | Tang Z Y(唐致远), He Y B(贺艳兵), Song Q S(宋全生), et al. Synergistic functions of trimethl phosphate and vinylene carbonate as additives for the Li ion batteries[J]. Journal of Electrochemistry(电化学), 2006, 12(4): 388-392. |
| [9] | Zhu J, Gladden C, Liu N, Cui Y, et al. Nanoporous silicon networks as anodes for lithium ion batteries[J]. Physical Chemistry Chemical Physics, 2012, 15(2): 440-443. |
| [10] | Wen Z S, Yang J, Wang B F, et al. High capacity silicon/carbon composite anode materials for lithium ion batteries[J]. Electrochemistry Communications, 2003, 5(2): 165-168. |
| [11] | Guo J, Sun A, Chen X, et al. Cyclability study of silicon-carbon composite anodes for lithium-ion batteries using electrochemical impedance spectroscopy[J]. Electrochimica Acta, 2011, 56(11): 3981-3987. |
| [12] | Castro N A H, Guinea F, Peres N M R, et al. The electronic properties of graphene[J]. Reviews of Modern Physics, 2009, 81(1): 109-162. |
| [13] | Chou S L, Wang J Z, Choucair M, et al. Enhanced reversible lithium storage in a nanosize silicon/graphene composite[J]. Electrochemistry Communications, 2010, 12(2): 303-306. |
