The paper presents the study of hierarchy of deformation wave-processes from nano- to macro-structural level, which takes place in dissimilar materials, bonded by high-temperature vacuum rolling in solid phase. The focus was on the processes that occur on the interface of the bonded materials: mass trasfer of impurities and alloying elements stimulated by deformation, the study of nano- and micro-hardness.
References
[1]
Borts, B.V., Danilenko, N.I., Parkhomenko, А.А., Tkachenko, V.I., Korotkova, I.М., Vorobjev, I.A. and Lopata, А.А. (2014) Nano-Mechanisms of Deformation Close to the Interface of Dissimilar Materials Joined in Solid Phase by Means of High Temperature rolling. Open Journal of Metals, 4, 107-111.
[2]
Borts, B.V., Parkhomenko, A.A., Vorobjev, V.A., Lopata, A.A., Aleksandrov, V.A. and Domnich, M.P. (2018) Changes in the Structure and Properties of the Cu-Pb Composites Interface Jointed in the Solid Phase. Open Journal of Metals, 8, 55-65.
https://doi.org/10.4236/ojmetal.2018.83004
[3]
Borts, B.V. (2012) Formation of the Joint of Dissimilar Metals in the Solid Phase by the Method of Vacuum Hot Rolling. Materials Science, 47, 689-695.
https://doi.org/10.1007/s11003-012-9445-6
[4]
Neklydov, I.M., Borts, B.V. and Tkachenko, V.I. (2011) Features of Formation of Dissimilar Metal Joints in Hot Roll Welding in Vacuum. Paton Welding Journal, No. 27, 27-32.
[5]
Greenberg, B.A., Ivanov, М.А., Kuzmin, S.V. and Lysak, V.I. (2017) Explosive Welding: Processes and Structures. Innovation Enginnering, 235 p.
[6]
Kuksenko, V., Pareige, C. and Pareige P. (2012) Intra Granular Precipitation and Grain Boundary Segregation under Neutron Irradiation in a Low Purity Fe-Cr Based Alloy. Journal of Nuclear Materials, 425, 125-129.
https://doi.org/10.1016/j.jnucmat.2011.10.031
[7]
Larikov L.N., Mazanko V.F. and Falchenko V.M. (1983) Mass-Transfer in Metals under Pulse Stressing. Physical and Mechanical Treatment of Materials, No. 6, 144-145.
[8]
Petrov, Y.N., Falchenko, V.M., Mazanko, V.F., Yakubzev, I.A. and Vorona, S.P. (1988) Influence of Temperature on Nickel Atoms Mobility in the Austenitic Steel under High-Speed Deformation. Metal Physics, 10, 124-129.
[9]
Zaharov, S.M., Larikov, L.N. and Mezhvinskii, R.L. (1995) Influence of Driving Force Created by External Pressure on Diffusion Mass-Transfer in the Solid Body. Physics of Metals and Advanced Technologies, No. 1, 30-35.
[10]
Panin, V.E., Panin, A.V., Moiseenko, D.D., Shlyapin, A.D., Avraamov, U.S. and Koshkin, V.I. (2006) Physical Mesomechanics of a Deformed Solid as a Multilevel System. Physical Mesomechanics, 9, 5-13.
[11]
Clayton, J.D., McDowell, D.L. and Bammann, D.J. (2006) Modeling Dislocations and Disclinations with Finite Micropolar Elastoplasticity. International Journal of Plasticity, 22, 210-256. https://doi.org/10.1016/j.ijplas.2004.12.001
[12]
Borts, B.V., Danilenko, N.I., Necklyudov, I.M., Parkhomenko, A.A. and Firstov S.A. (2011) Nano-Structuring and Mass-Transfer Close to Materials Interface, Joint by Method of Hot Rolling in Vacuum. Metal Physics and Advanced Technologies, 33, 1035-1044.
[13]
Konstantinova, T.E., Varukchin, V.N., Glasunova, V.A. and Burhovetskii, V.V. (2016) Defects in Nb-Ti Alloy, Deformed in Conditions of High Pressures. Polytechnic University, Saint Petersburg, 51-53.
