全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

Optimization Conditions of the Preparation of Activated Carbon Based Egusi (Cucumeropsis mannii Naudin) Seed Shells for Nitrate Ions Removal from Wastewater

DOI: 10.4236/ajac.2018.910034, PP. 439-463

Keywords: Egusi Seed Shells, Activated Carbon, Optimization, Nitrate Ions, Wastewater, Adsorption Process

Full-Text   Cite this paper   Add to My Lib

Abstract:

Egusi seed shells (ESS) were used as precursor for the preparation of two activated carbons (ACs) following H3PO4 and ZnCl2 activation. The effect of factors controlling the preparation of ACs such as chemical activating agent concentration (2 - 10 M), activation temperature (400°C - 700°C) and residence time (30 - 120 min) were optimized using the Box-Behnken Design (BBD). The optimized activated carbons based H3PO4 (ACP) and ZnCl2 (ACZ) were characterized by N2 adsorption, elemental analysis, atomic force microscopy (AFM), Boehm titration and Fourier transformed infrared (FTIR) techniques. The specific surface area was found to be 1053.91 and 1009.89 m2·g-1 for ACP and ACZ respectively. The adsorbents had similar surface functionalities and were both microporous. The effect of various parameters such as initial pH, concentration, and contact time on the adsorption of nitrate ions on ACP and ACZ in aqueous solution was studied. ACZ demonstrated better adsorption capacity (8.26 mg·g-1) compared to ACP (5.65 mg·g-1) at the same equilibrium time of 20 min. The adsorption process was governed by a “physical interactions” phenomenon for both adsorbents.

References

[1]  Loganathan, P., Vigneswaran, S. and Kandasamy, J. (2013) Enhanced Removal of Nitrate from Water Using Surface Modification of Adsorbents—A Review. Journal of Environmental Management, 131, 363-374.
https://doi.org/10.1016/j.jenvman.2013.09.034
[2]  Mehrabi, N., Soleimani, M., Yeganeh, M.M and Sharififard, H. (2015) Parameter Optimization for Nitrate Removal from Water Using Activated Carbon and Composite of Activated Carbon and Fe2O3 Nanoparticles. RSC Advances, 5, 51470-51482.
https://doi.org/10.1039/C5RA03920G
[3]  Nunell, G., Fernandez, M., Bonelli, P. and Cukierman, A. (2015) Nitrate Uptake Improvement by Modified Activated Carbons Developed from Two Species of Pine Cones. Journal of Colloid and Interface Science, 440, 102-108.
https://doi.org/10.1016/j.jcis.2014.10.058
[4]  WHO (2011) Guidelines for Drinking-Water Quality. 4th Edition, World Health Organisation, Geneva.
[5]  Rezaei, R., Dehghanifard, E., Mohseni-Bandpi, A., Rezaei, L., Esrafili, A., Kakavandi, B. and Azari, B. (2016) Nitrate Adsorption by Synthetic Activated Carbon Magnetic Nanoparticles: Kinetics, Isotherms and Thermodynamic Studies. Desalination and Water Treatment, 57, 16445-16455.
https://doi.org/10.1080/19443994.2015.1079251
[6]  Kim, J.Y., Balathanigaimani, M. and Moon, H. (2015) Adsorptive Removal of Nitrate and Phosphate Using MCM-48, SBA-15, Chitosan, and Volcanic Pumice. Water, Air, & Soil Pollution, 226, 431.
https://doi.org/10.1007/s11270-015-2692-z
[7]  Chatterjee, S. and Woo, S.H. (2009) The Removal of Nitrate from Aqueous Solutions by Chitosan Hydrogel Beads. Journal of Hazardous Materials, 164, 1012-1018.
https://doi.org/10.1016/j.jhazmat.2008.09.001
[8]  Ahmad, A., Hameed, B. and Ahmad, A. (2009) Removal of Disperse Dye from Aqueous Solution Using Waste-Derived Activated Carbon: Optimization Study. Journal of Hazardous Materials, 170, 612-619.
https://doi.org/10.1016/j.jhazmat.2009.05.021
[9]  Tan, I., Ahmad, A. and Hameed, B. (2008) Optimization of Preparation Conditions for Activated Carbons from Coconut Husk Using Response Surface Methodology. Chemical Engineering Journal, 137, 462-470.
https://doi.org/10.1016/j.cej.2007.04.031
[10]  Tounsadi, H., Khalidi, A., Abdennouri, M. and Barka, N. (2016) Activated Carbon from Diplotaxis Harra Biomass: Optimization of Preparation Conditions and Heavy Metal Removal. Journal of the Taiwan Institute of Chemical Engineers, 59, 348-358.
https://doi.org/10.1016/j.jtice.2015.08.014
[11]  Yahya, M.A., Al-Qodah, Z. and Ngah, C.Z. (2015) Agricultural Bio-Waste Materials as Potential Sustainable Precursors Used for Activated Carbon Production: A Review. Renewable and Sustainable Energy Reviews, 46, 218-235.
https://doi.org/10.1016/j.rser.2015.02.051
[12]  Danish, M., Hashim, R., Ibrahim, M.N.M. and Sulaiman, O. (2014) Optimized Preparation for Large Surface Area Activated Carbon from Date (Phoenix dactylifera L.) Stone Biomass. Biomass and Bioenergy, 61, 167-178.
https://doi.org/10.1016/j.biombioe.2013.12.008
[13]  Kouotou, D., Manga, H.N., Baçaoui, A., Yaacoubi, A. and Mbadcam, J.K. (2012) Optimization of Activated Carbons Prepared by and Steam Activation of Oil Palm Shells. Journal of Chemistry, 2013, 10.
[14]  dos Reis, G.S., Wilhelm, M., de Almeida Silva, T.C., Rezwan, K., Sampaio, C.H., Lima, E.C. and Ulson de Souza, S.M.A.G. (2016) The Use of Design of Experiments for the Evaluation of the Production of Surface Rich Activated Carbon from Sewage Sludge via Microwave and Conventional Pyrolysis. Applied Thermal Engineering, 93, 590-597.
https://doi.org/10.1016/j.applthermaleng.2015.09.035
[15]  Kumar, A. and Jena, H.M. (2016) Preparation and Characterization of High Surface Area Activated Carbon from Fox Nut (Euryale ferox) Shell by Chemical Activation with H3PO4. Results in Physics, 6, 651-658.
https://doi.org/10.1016/j.rinp.2016.09.012
[16]  Ndi, N.J. and Ketcha, M.J. (2013) The Adsorption Efficiency of Chemically Prepared Activated Carbon from Cola Nut Shells by on Methylene Blue. Journal of Chemistry, 2013, Article ID: 469170.
[17]  Angin, D. (2014) Production and Characterization of Activated Carbon from Sour Cherry Stones by Zinc Chloride. Fuel, 115, 804-811.
https://doi.org/10.1016/j.fuel.2013.04.060
[18]  Sayγili, H. and Güzel, F. (2016) High Surface Area Mesoporous Activated Carbon from Tomato Processing Solid Waste by Zinc Chloride Activation: Process Optimization, Characterization and Dyes Adsorption. Journal of Cleaner Production, 113, 995-1004.
https://doi.org/10.1016/j.jclepro.2015.12.055
[19]  Gao, Y., Xu, S., Yue, Q., Wu, Y. and Gao, B. (2016) Chemical Preparation of Crab Shell-Based Activated Carbon with Superior Adsorption Performance for Dye Removal from Wastewater. Journal of the Taiwan Institute of Chemical Engineers, 61, 327-335.
https://doi.org/10.1016/j.jtice.2015.12.023
[20]  González, P., Hernández-Quiroz, T. and García-González, L. (2014) The Use of Experimental Design and Response Surface Methodologies for the Synthesis of Chemically Activated Carbons Produced from Bamboo. Fuel Processing Technology, 127, 133-139.
https://doi.org/10.1016/j.fuproc.2014.05.035
[21]  Mohammed, J., Nasri, N.S., Zaini, M.A.A., Hamza, U.D. and Ani, F.N. (2015) Adsorption of Benzene and Toluene onto KOH Activated Coconut Shell Based Carbon Treated with NH3. International Biodeterioration & Biodegradation, 102, 245-255.
https://doi.org/10.1016/j.ibiod.2015.02.012
[22]  Aber, S., Khataee, A. and Sheydaei, M. (2009) Optimization of Activated Carbon Fiber Preparation from Kenaf Using K2HPO4 as Chemical Activator for Adsorption of Phenolic Compounds. Bioresource Technology, 100, 6586-6591.
https://doi.org/10.1016/j.biortech.2009.07.074
[23]  Auta, M. and Hameed, B. (2011) Optimized Waste Tea Activated Carbon for Adsorption of Methylene Blue and Acid Blue 29 Dyes Using Response Surface Methodology. Chemical Engineering Journal, 175, 233-243.
https://doi.org/10.1016/j.cej.2011.09.100
[24]  Giwa, S., Abdullah, L.C. and Adam, N.M. (2010) Investigating “Egusi” (Citrullus colocynthis L.) Seed Oil as Potential Biodiesel Feedstock. Energies, 3, 607-618.
https://doi.org/10.3390/en3040607
[25]  Kortse, P.A. and Oladiran, A.J. (2012) The Quality of “Egusi-Itoo” Melon (Cucumeropsis Mannii Naudin.) Seed Harvested at Different Fruit Ages. International Journal of Scientific and Research Publications, 2, 1-5.
[26]  Sadiq, M., Abubakar, M. and Yusuf, T. (2013) Economies of Scale and Cost Efficiency in Small Scale Egusi Melon Production in Bida Local Government Area of Niger State, Nigeria. Journal of Agriculture and Veterinary Science, 2, 92-97.
https://doi.org/10.9790/2380-0269297
[27]  Bezerra, M.A., Santelli, R.E., Oliveira, E.P., Villar, L.S. and Escaleira, L.A. (2008) Response Surface Methodology (RSM) as a Tool for Optimization in Analytical Chemistry. Talanta, 76, 965-977.
https://doi.org/10.1016/j.talanta.2008.05.019
[28]  Sugashini, S. and Begum, K.M.S. (2013) Optimization Using Central Composite Design (CCD) for the Biosorption of Cr(VI) Ions by Cross Linked Chitosan Carbonized Rice Husk (CCACR). Clean Technologies and Environmental Policy, 15, 293-302.
https://doi.org/10.1007/s10098-012-0512-3
[29]  Ahmad, M.A. and Alrozi, R. (2010) Optimization of Preparation Conditions for Mangosteen Peel-Based Activated Carbons for the Removal of Remazol Brilliant Blue R Using Response Surface Methodology. Chemical Engineering Journal, 165, 883-890.
https://doi.org/10.1016/j.cej.2010.10.049
[30]  Zhang, Z. and Zheng, H. (2009) Optimization for Decolorization of Azo Dye Acid Green 20 by Ultrasound and H2O2 Using Response Surface Methodology. Journal of Hazardous Materials, 172, 1388-1393.
https://doi.org/10.1016/j.jhazmat.2009.07.146
[31]  Demiral, I., Samdan, A.C. and Demiral, H. (2016) Production and Characterization of Activated Carbons from Pumpkin Seed Shell by Chemical Activation with ZnCl2. Desalination and Water Treatment, 57, 2446-2454.
https://doi.org/10.1080/19443994.2015.1027276
[32]  Baccar, R., Bouzid, J., Feki, M. and Montiel, A. (2009) Preparation of Activated Carbon from Tunisian Olive-Waste Cakes and Its Application for Adsorption of Heavy Metal Ions. Journal of Hazardous Materials, 162, 1522-1529.
https://doi.org/10.1016/j.jhazmat.2008.06.041
[33]  Qiu, P., Cui, M., Kang, K., Park, B., Son, Y., Khim, E., Jang, M. and Khim, J. (2014) Application of Box-Behnken Design with Response Surface Methodology for Modeling and Optimizing Ultrasonic Oxidation of Arsenite with H2O2. Central European Journal of Chemistry, 2, 164-172.
https://doi.org/10.2478/s11532-013-0360-y
[34]  Yin, G. and Dang, Y. (2008) Optimization of Extraction Technology of the Lycium barbarum Polysaccharides by Box-Behnken Statistical Design. Carbohydrate Polymers, 74, 603-610.
https://doi.org/10.1016/j.carbpol.2008.04.025
[35]  Aslan, N. and Cebeci, Y. (2007) Application of Box-Behnken Design and Response Surface Methodology for Modeling of Some Turkish Coals. Fuel, 86, 90-97.
https://doi.org/10.1016/j.fuel.2006.06.010
[36]  Yetilmezsoy, K., Demirel, S. and Vanderbei, R.J. (2009) Response Surface Modeling of Pb (II) Removal from Aqueous Solution by Pistacia vera L.: Box-Behnken Experimental Design. Journal of Hazardous Materials, 171, 551-562.
https://doi.org/10.1016/j.jhazmat.2009.06.035
[37]  Kyzas, G.Z., Deliyanni, E.A. and Matis, K.A. (2016) Activated Carbons Produced by Pyrolysis of Waste Potato Peels: Cobalt Ions Removal by Adsorption. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 490, 74-83.
https://doi.org/10.1016/j.colsurfa.2015.11.038
[38]  Cataldo, D., Maroon, M., Schrader, L. and Youngs, V. (1975) Rapid Colorimetric Determination of Nitrate in Plant Tissue by Nitration of Salicylic Acid. Communications in Soil Science and Plant Analysis, 6, 71-80.
https://doi.org/10.1080/00103627509366547
[39]  Zhu, G.-Z., Deng, X.-L., Hou, M., Sun, K., Zhang, Y.-P., Li, P. and Lian, F.-M. (2016) Comparative Study on Characterization and Adsorption Properties of Activated Carbons by Phosphoric Acid Activation from Corncob and Its Acid and Alkaline Hydrolysis Residues. Fuel Processing Technology, 144, 255-261.
https://doi.org/10.1016/j.fuproc.2016.01.007
[40]  Joshi, R.R. (2016) Optimization of Conditions for the Preparation of Activated Carbon from Lapsi (Choerospondias axillaris) Seed Stone Using ZnCl2. Journal of the Institute of Engineering, 11, 128-139.
https://doi.org/10.3126/jie.v11i1.14707
[41]  Deng, H., Zhang, G., Xu, X., Tao, G. and Dai, J. (2010) Optimization of Preparation of Activated Carbon from Cotton Stalk by Microwave Assisted Phosphoric Acid-Chemical Activation. Journal of Hazardous Materials, 182, 217-224.
https://doi.org/10.1016/j.jhazmat.2010.06.018
[42]  Demiral, H. and Gündüzoglu, G. (2010) Removal of Nitrate from Aqueous Solutions by Activated Carbon Prepared from Sugar Beet Bagasse. Bioresource Technology, 101, 1675-1680.
https://doi.org/10.1016/j.biortech.2009.09.087
[43]  Ozdemir, I., Sahin, M., Orhan, R. and Erdem, M. (2014) Preparation and Characterization of Activated Carbon from Grape Stalk by Zinc Chloride Activation. Fuel Processing Technology, 125, 200-206.
https://doi.org/10.1016/j.fuproc.2014.04.002
[44]  Gao, Q., Liu, H., Cheng, C., Li, K., Zhang, J. and Li, Y. (2013) Preparation and Characterization of Activated Carbon from Wool Waste and the Comparison of Muffle Furnace and Microwave Heating Methods. Powder Technology, 249, 234-240.
https://doi.org/10.1016/j.powtec.2013.08.029
[45]  Afkhami, A., Madrakian, T. and Karimi, Z. (2007) The Effect of Acid Treatment of Carbon Cloth on the Adsorption of Nitrite and Nitrate Ions. Journal of Hazardous Materials, 144, 427-431.
https://doi.org/10.1016/j.jhazmat.2006.10.062

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133