In order to harness wind energy with high coefficients, horizontal axis wind turbines (HAWT), like propeller-type wind turbines, have an advantage in terms of practical utilization because of their scale merit. However, large size and high tip-speed ratio are inherently related to material strength problems and low frequency noise emissions to the environment. In contrast to HAWT, we will discuss a flapping-type turbine driven at low speed. The flapping turbine works using lift force like the HAWT, but employs a new wind turbine concept in the present report. The concept involves the unique flapping motion of a wind blade mounted on a Chebyshev-dyad linkage by which the wing transforms wind energy into mechanical rotation. Both static and dynamic numerical estimates are developed to optimize all fundamental parameters of this linkage in order to obtain the desired torque. In this paper, the results of primitive optimization for determining the fundamental characteristics of motion and the trajectory of the wind turbine blade are demonstrated in order to obtain smooth rotation of the generator-driving shaft. It is also shown that the present turbine can be driven at low speed with a suitable energy conversion rate. Moreover, the practicality of operating slow flapping-type wind turbines is demonstrated, focusing on usage near residential areas or, e.g., on rooftops owing to lower noise. The feasibility of “figure eight” trajectory diversity is discussed along with geometrical parameters. Assuming one-blade motion with a variable trajectory for optimization, the smooth motion and required torque at slow rotation speeds are studied.
References
[1]
Wu, B., Lang, Y., Zargari, N. and Kouro, S. (2011) Power Conversion and Control of Wind Energy Systems 77. John Wiley & Sons Ltd., Hoboken, 3-6.
[2]
Aslam Bhutta, M.M., Hayat, N., Farooq, A.U., Ali, Z., Jamil, S.R. and Hussain, Z. (2012) Vertical Axis Wind Turbine—A Review of Various Configurations and Design Techniques. Renewable & Sustainable Energy Reviews, 16, 1926-1939.
https://doi.org/10.1016/j.rser.2011.12.004
[3]
Tummala, A., Velamati, R.K., Sinha, D.K., Indraja, V. and Krishna, V.H. (2016) A Review on Small Scale Wind Turbines. Renewable & Sustainable Energy Reviews, 56, 1351-1371. https://doi.org/10.1016/j.rser.2015.12.027
[4]
Barrios, L. and Rodriguez, A. (2004) Behavioural and Environmental Correlates of Soaring-Bird Mortality at On-Shore Wind Turbines. Journal of Applied Ecology, 41, 72-81. https://doi.org/10.1111/j.1365-2664.2004.00876.x
[5]
Bakker, R.H., Pedersen, E., van den Berg, G.P., Stewart, R.E., Lok, W. and Bouma, J. (2012) Impact of Wind Turbine Sound on Annoyance, Self-Reported Sleep Disturbance and Psychological Distress. Science of the Total Environment, 425, 42-51.
https://doi.org/10.1016/j.scitotenv.2012.03.005
[6]
Peng, Z. and Zhu, Q. (2009) Energy Harvesting through Flow-Induced Oscillations of a Foil. Physics of Fluids, 21, Article ID: 123602.
https://doi.org/10.1063/1.3275852
[7]
Li, S. and Lipson, H. (2009) Vertical-Stalk Flapping-Leaf Generator for Wind Energy Harvesting. Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Oxnard, 21-23 September 2009, 611-619.
https://doi.org/10.1115/SMASIS2009-1276
[8]
Ho, S., Nassef, H., Pornsinsirirak, N., Tai, Y.-C. and Ho, C.-M. (2003) Unsteady Aerodynamics and Flow Control for Flapping Wing Flyers. Progress in Aerospace Sciences, 39, 635-681. https://doi.org/10.1016/j.paerosci.2003.04.001
[9]
Xiao, Q., Liu, W. and Incecik, A. (2013) Flow Control for VATT by Fixed and Oscillating Flap. Renewable Energy, 51, 141-152.
https://doi.org/10.1016/j.renene.2012.09.021
[10]
Yen, J. and Ahmed, N.A. (2013) Enhancing Vertical Axis Wind Turbine by Dynamic Stall Control Using Synthetic Jets. Journal of Wind Engineering & Industrial Aerodynamics, 114, 12-17. https://doi.org/10.1016/j.jweia.2012.12.015
[11]
Hirahara, H., Hossain, M.Z., Kawahashi, M. and Nonomura, Y. (2005) Testing Basic Performance of a Very Small Wind Turbine Designed for Multi-Purposes. Renewable Energy, 30, 1279-1297. https://doi.org/10.1016/j.renene.2004.10.009
[12]
Hossain, M.Z., Hirahara, H., Nonomura, Y. and Kawahashi, M. (2007) The Wake Structure in a 2D Grid Installation of the Horizontal Axis Micro Wind Turbines. Renewable Energy, 32, 2247-2267. https://doi.org/10.1016/j.renene.2006.11.016
[13]
Dijksman, E.A. (1981) Watt-1 Linkages with Shunted Chebyshev-Dyads, Producing Symmetrical 6-Bar Curves. Mechanism and Machine Theory, 16, 153-165.
https://doi.org/10.1016/0094-114X(81)90061-6
[14]
Zhou, H. and Cheung, E.H. (2004) Adjustable Four-Bar Linkages for Multi-Phase Motion Generation, Mechanism and Machine Theory, 39, 261-279.
https://doi.org/10.1016/j.mechmachtheory.2003.07.001
[15]
Ogawa, K. (1962) An Application of Six-Bar Linkage to the Thread Take-Up Lever in a Sewing Machine. Bulletin of JSME, 5, 554-560.
https://doi.org/10.1299/jsme1958.5.554
[16]
Ceccarelli, M. (2011) Mechanism Designs of Cultural Heritage. 13th World Congress in Mechanism and Machine Science, Guanajuato, 19-25 June 2011.
[17]
Zhou, H. and Cheung, E.H. (2002) Analysis and Optimal Synthesis of Adjustable Linkages for Path Generation. Mechatronics, 12, 949-961.
https://doi.org/10.1016/S0957-4158(01)00034-4
[18]
Chandar, D.D.J. and Damodaran, M. (2010) Computation of Unsteady Low Reynolds Number Free-Flight Aerodynamics of Flapping Wings. Journal of Aircraft, 47, 141-150. https://doi.org/10.2514/1.44456
[19]
Abbott, I.H. and Von Doenhoff, A.E. (1959) Theory of Wing Sections: Including a Summary of Airfoil Data. Dover Publications, Mineola.
[20]
Sheldahl, R.E. and Klimas, P.C. (1981) Aerodynamic Characteristics of Seven Symmetrical Airfoil Sections through 180-Degree Angle of Attack for Use in Aerodynamic Analysis of Vertical Axis Wind Turbines. Sandia National Labs, Albuquerque.
