This article deals with the use of an interdisciplinary approach to modelling and creation of a complex technical system of different physical nature in relation to the kinematics of cutting and shaping. The professor of the National Technical University of Ukraine, Kuznetcov Iu. N., proposed the approach based on generalization of knowledge, methodological basis of which is the theory of evolution of the systems and methods of genetic analysis and synthesis. For generalization of the knowledge in the fundamental sciences is based on the principles of a limited number of elementary generic structures with the introduction of the gene concept. The modelling and synthesis of kinematic cutting schemes are providing the efficiency and viability of genetic and morphological approach. The material point, which can interact with other ma-terial points in space and time, simulating anthropogenic system of different origin, is introduced as a material object.
Denavit, J. and Hartenberg, R.S. (1955) A Kinematic Notation for Lower-Pair Mechanisms Based on Matrices. ASME Journal of Applied Mechanics, 77, 215-221.
[3]
Radzevich, S.P. (2007) Kinematic Geometry of Surface Machining. CRC Press Inc. http://dx.doi.org/10.1201/9781420063417
[4]
Rodin, P.R. (1981) Shaping Fundamentals of Surface by Cutting. Vishcha Shkola, Kiev.
[5]
Inasaki, I. Kishinami, K., Sakamoto, S. Takeuchi, Y.L. and Tanaka, F. (1997) Shape Generation Theory of Machine Tools. Yokendo Press.
[6]
Klemm, F.A. (1964) History of Western Technology. The M.I.T. Press, Cambridge, Massachusetts.
[7]
Konovalov, G.G. (I960) Fundamentals of New Method of Metal Cutting. ASB, Minsk.
[8]
Krivosheya, A.V., Petasyuk, O.U., Melnik, V.E. and Korinets A.V. (2004) Procedure of Setting and Mathematical Description of the Initial Form-Generating Profiles. Journal of Superhard Material, 1, 73-85.
[9]
Hoischen, H. and Hesser, W. (2006) Technisches Zeichnen. Comelsen, Berlin, 478.
[10]
Krivosheya, A., Danilchenko, J.U., Storchak, M. and Pastemak, S. (2016) Design of Shaping Machine and Tooling Systems for Gear Manufacturing. In: Goldfarb, V. and Barmina, N., Eds., Theory and Practice of Gearing and Transmissions, Springer International Publishing, USA, 425-450. http://dx.doi.org/10.1007/978-3-319-19740-1_21
[11]
Biryukov, B.N. (1987) Machines Which Create Machines. -K.: Technik 143.
[12]
Hill, P.H. (1970) The Science of Engineering Design. Holt, Rinehart and Winston, Inc. Tufts University, New York.
[13]
Masok, O.T. (1966) The Origins of Inventions: A Study of Industry among Primitive Peoples. The M.I.T. Press, Cambridge, Massachusetts.
[14]
Katsumi, N. and Sasaki, T. (1994) Affine Differential Geometry. Cambridge University Press, Cambridge, XIV.
[15]
Ito, Y. (2008) Modular Design for Machine Tools. McGraw Hill, New York, 504 p.
[16]
Averjanov, O.I. (1987) The Modular Principle of Machine Tools with CNC Building. Machine Building, Moscow, 232.
[17]
Kuznetcov, Iu.N., Hasan Al-Dabbas, Zh.A. and Hamuyela, G. (2014) Genetic-Morpholo-gical Approach for Creation of Widerange Eccentric Drilling-Milling Chuck. International Journal of Sciences: Basic and Applied Research (IJSBAR), 13, 186-196.
[18]
Kuznetcov, Iu.N. and Shunkarenko, V. (2011) The Genetic Approach Is the Key to Innovative Synthesis of Complicated Technical SYSTEMS. Journal of the Technical University at Plovdiv, Bulgaria Fundamental Sciences and Applications, 16, 15-33.
[19]
Nedelcheva, P. and Nedelcheva, E. (2010) Genetic Morphological Approach to Formation of Surfaces. Journal of Mechanical Engineering—National Technical University of Ukraine Kiev Polytechnic Institute, 59, 176-179.
[20]
Shynkarenko, V.F. (2002) Fundamentals of the Theory of Evolution Electromechanical System. Naukova Dumka, 288.
[21]
Shynkarenko, V. and Kuznetcov, Iu.N. (2016) Inter Disciplinary Approach to Modelling and Synthesis of Difficult Technical System. Journal of the Technical University of Gabrovo, 52, 24-28.
[22]
Odrin, V.M. (1989) The Method of Morphological Analysis of Technical Systems. 312.
[23]
Portman, V., Inasaki, I., Sakakura, M. and Iwatate, M. (1998) Form-Shaping System of Machine Tools: Theory and Applications. Annals of the CIRP, 47, 329-332. http://dx.doi.org/10.1016/S0007-8506(07)62844-3
[24]
Kuznetcov, Iu.N., Hamuyela, Zh.A. and Guerra Al-Refo Ibrahim, F.S. (2014) Description and Synthesis of Clamping Mechanisms at Other Levels of Structure Complication. Journal of Lutsk National Technological University, 42, 12-20.
[25]
Vragov, Yu.D. (1978) Analysis of Machine Tools Configurations. (Fundamentals of Componetik). Machine Building, Moscow, 208.
[26]
Perepeliza, B.A., Kondusova, Е.В. and Filimonov, E.V. (2002) Features of Cutting Tools 3D Modeling on Basis of Space Multi Parameter Reflection. Journal of Kharkov National Technological University, 62, 99-103.
