The choice of this
investigation is to tune the proportional-integral-derivative (PID) parameters
separately for controlling the moisture content in paper industry by using
Particle Swarm Optimization (PSO). This paper boon a new algorithm for PID
controller tuning based particle swarm optimization. PSO algorithm has recently
developed as a very powerful method for real parameter optimization. This new
process is proposed to combine both the algorithms to get better optimization
values.The proposed algorithm
tuned the PID parameters and its performance has been compared with PID algorithm.
Compared to PID algorithm technique, dynamic performance requirements such as
rise time settling time and peak overshoot optimal values produced by PSO. The
plant model represented by the transfer function is obtained by the system
identification toolbox.
References
[1]
Heo, C.H., Cho, H. and Yeo, Y.-K. (2011) Dynamic Modelling of Paper Drying Processes. Korean Journal of Chemical Engineering, 28, 1651-1657. http://dx.doi.org/10.1007/s11814-011-0046-0
[2]
Sl?tteke, O. (2006) Modeling and Control of the Paper Machine Drying Section. Thesis, Lund University, Lund.
[3]
Austin, P.C., Mack, J., McEwan, M., Afshar, P., Brown, M. and Maciejowski, J. (2011) Improved Energy Efficiency in Paper Making through Reducing Dryer Steam Consumption Using Advanced Process Control. PaperCon, 1, 1122- 1132.
[4]
Goyal, S. and Kumar, R. (2013) ANN Control of Paper Drying Process. International Journal of Application or Innovation in Engineering & Management, 2, 100-107.
[5]
Karthik, C., Valarmathi, K. and Raja Lakshmi, M. (2012) Nonlinear Modelling of Moisture Control of Drying Process in Paper Machine. Procedia Engineering, 38, 1104-1111. http://dx.doi.org/10.1016/j.proeng.2012.06.139
[6]
Sajwan, N. and Rajesh, K. (2011) Artificial Neural Network Modeling for Tensile Strength of Paper in Paper Manufacturing Process. International Journal of Information Technology and Knowledge Management, 4, 409-412.
[7]
Yeo, Y.-K., Hwang, K.-S., Yi, S.C. and Kang, H. (2004) Modeling of the Drying Process in Paper Plants. Korean Journal of Chemical Engineering, 21, 761-766. http://dx.doi.org/10.1007/BF02705517
[8]
Zvolinschi, A., Johannessen, E. and Kjelstrup, S. (2006) The Second-Law Optimal Operation of a Paper Drying Machine. Chemical Engineering Science, 61, 3653-3662. http://dx.doi.org/10.1016/j.ces.2005.12.030
[9]
Lu, T. and Shen, S.Q. (2007) Numerical and Experimental Investigation of Paper Drying: Heat and Mass Transfer with Phase Change in Porous Media. Applied Thermal Engineering, 27, 1248-1258. http://dx.doi.org/10.1016/j.applthermaleng.2006.11.005
[10]
Astrom, K.J. and Hagglund, T. (1995) PID Controllers Theory, Design and Tuning.
[11]
Venugopal, P., Ganguly, A. and Singh, P. (2013) Design of Tuning Methods of PID Controller Using Fuzzy Logic. International Journal of Emerging Trends in Engineering and Development, 5, 239-248.
[12]
Tang, K.S., Man., K.F., Chen, G. and Kwong, S. (2001) An Optimal Fuzzy PID Controller. IEEE Transactions on Industrial Electronics, 48, 757-765. http://dx.doi.org/10.1109/41.937407
[13]
Ziegler, J.G., Nichols, N.B. and Rochester, N.Y. (1942) Reprint of Optimum Settings for Automatic Controllers. Transactions of the A.S.M.E, 759-765.
[14]
Sharifian, M.B.B., Rahnavard, R. and Delavari, H. (2009) Velocity Control of DC Motor Based Intelligent Methods and Optimal Integral State Feedback Controller. International Journal of Computer Theory and Engineering, 1, 1793- 8201.
[15]
Ko, C.-N. and Wu, C.-J. (2007) A PSO-Tuning Method for Design of Fuzzy PID Controllers. Journal of Vibration and Control, 14, 375-395. http://dx.doi.org/10.1177/1077546307080038
[16]
Harinath, E. and Mann, G.K.I. (2008) Design and Tuning of Standard Additive Model Based Fuzzy PID Controllers for Multivariable Process Systems. IEEE Transactions on Systems, Man, and Cybernetics—Part B: Cybernetics, 38, 667-674. http://dx.doi.org/10.1109/TSMCB.2008.919232
[17]
Li, K. (2013) PID Tuning for Optimal Closed-Loop Performance with Specified Gain and Phase Margins. IEEE Transactions on Control Systems Technology, 21, 1024-1030. http://dx.doi.org/10.1109/TCST.2012.2198479
[18]
Seng, T.L., Khalid, M.B. and Yusof, R. (1999) Tuning of a Neuro-Fuzzy Controller by Genetic Algorithm. IEEE Transactions on Systems, Man, and Cybernetics—Part B: Cybernetics, 29, 226-236. http://dx.doi.org/10.1109/3477.752795
[19]
Kim, K., Rao, P. and Burnworth, J.A. (2010) Self-Tuning of the PID Controller for a Digital Excitation Control System. IEEE Transactions on Industry Applications, 46, 1518-1524. http://dx.doi.org/10.1109/TIA.2010.2049631
[20]
Milanés, V., Villagrá, J., Godoy, J. and González, C. (2012) Comparing Fuzzy and Intelligent PI Controllers in Stop- and-Go Manoeuvres. IEEE Transactions on Fuzzy Systems, 20, 770-778. http://dx.doi.org/10.1109/tcst.2011.2135859
[21]
Du, X. and Ying, H. (2010) Derivation and Analysis of the Analytical Structures of the Interval Type-2 Fuzzy-PI and PD Controllers. IEEE Transactions on Fuzzy Systems, 18, 802-814. http://dx.doi.org/10.1109/TFUZZ.2010.2049022
[22]
Neath, M.J., Swain, A.K., Madawala, U.K. and Thrimawithana, D.J. (2014) An Optimal PID Controller for a Bidirectional Inductive Power Transfer System Using Multiobjective Genetic Algorithm. IEEE Transactions on Power Electronics, 29, 1523-1531. http://dx.doi.org/10.1109/TPEL.2013.2262953
[23]
Nasri, M., Nezamabadi-Pour, H. and Maghfoori, M. (2007) A PSO-Based Optimum Design of PID Controller for a Linear Brushless DC Motor. International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering, 1, 171-175.
[24]
Allaoua, B., Gasbaoui, B. and Mebarki, B. (2009) Setting up PID DC Motor Speed Control Alteration Parameters Using Particle Swarm Optimization Strategy. Leonardo Electronic Journal of Practices and Technologies, 19-32.
[25]
Girirajkumar, S.M., Sivasankaran, R., Radhakrishnan, T.K., Dharmalingam, V. and Anantharaman, N. (2008) Particle Swarm Optimization Technique Based Design of Pi Controller for a Real Time Nonlinear Process. Instrumentation Science & Technology, 36, 525-542. http://dx.doi.org/10.1080/10739140802234980
[26]
Ko, C.-N. and Wu, C.-J. (2007) A PSO-Tuning Method for Design of Fuzzy PID Controllers. Journal of Vibration and Control, 14, 375-395. http://dx.doi.org/10.1177/1077546307080038
