Growing demand for high-performance materials is driving the development of composites with nano material reinforcement. The use of nano reinforcement can provide a distinct advantage due to high surface area of the material. There are still many challenges in achieving the full potential of nanocomposites. In this paper, we investigate the performance of epoxy nanocomposites reinforced with short polymethyl methacrylate (PMMA) nanofibers. PMMA nanofibers were chopped and mixed with the epoxy resin and then the mixture was poured into a mould. Samples were cut to an appropriate size after cure and mechanical testing was carried out. Tensile and flexural strength and modulus were evaluated for samples with various fiber volume fractions to determine changes in mechanical performance. Also Scanning Electron Microscopy was utilized to investigate fracture surface and fiber-matrix interface. Results indicated that mechanical performance dropped as volume fraction of fibers increased, namely poor fiber-matrix adhesion and presence of porosity resulted in deterioration in strength and modulus. Further research is required to develop fiber coating system to enhance performance of the nanocomposite by improving fiber-matrix adhesion and fiber wet-out.
References
[1]
Alubaidy, A., Venkatakrishnan, K. and Tan, B. (2013) Nanofibers Reinforced Polymer Composite Microstructures. In: Maguire, R., Ed., Advances in Nanofibers, InTech, Croatia, 166.
[2]
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M. and Ramakrishna, S. (2003) A Review on Polymer Nanofibers by Electrospinning and Their Applications in Nanocomposites. Composite Science and Technology, 63, 2223-2252. http://dx.doi.org/10.1016/S0266-3538(03)00178-7
[3]
Subbiah, T., Bhat, G.S., Tock, R.W., Parameswaran, S. and Ramkumar, S.S. (2005) Electrospinning of Nanofibers. Journal of Applied Polymer Science, 96, 557-569. http://dx.doi.org/10.1002/app.21481
[4]
Reneker, D.H., Yarin, A.L., Zussman, E. and Xu, H. (2007) Electrospinning of Nanofibers from Polymer Solutions and Melts. Advances in Applied Mechanics, 41, 43-195. http://dx.doi.org/10.1016/S0065-2156(07)41002-X
[5]
Bhardwaj, N. and Kundu, S.B. (2010) Electrospinning: A Fascinating Fiber Fabrication Technique. Biotechnology Advances, 28, 325-347. http://dx.doi.org/10.1016/j.biotechadv.2010.01.004
[6]
Teo, W.-E., Inai, R. and Ramakrishna, S. (2011) Technological Advances in Electrospinning of Nanofibers. Science and Technology Advanced Materials, 12, 1-19. http://dx.doi.org/10.1088/1468-6996/12/1/013002
[7]
Lozano, K. and Barrera, E.V. (2001) Nanofiber-Reinforced Thermoplastic Composites. I. Thermoanalytical and Mechanical Analyses. Journal of Applied Polymer Science, 79, 125-133. http://dx.doi.org/10.1002/1097-4628(20010103)79:1<125::AID-APP150>3.0.CO;2-D
[8]
Rodriguez, A.J., Guzman, M.E., Lim, C.-S. and Minaie, B. (2011) Mechanical Properties of Carbon Nanofiber/Fiber-Reinforced Hierarchical Polymer Composites Manufactured with Multiscale-Reinforcement Fabrics. Carbon, 49, 937-948. http://dx.doi.org/10.1016/j.carbon.2010.10.057
[9]
Li, B., Yuan, H. and Zhang, Y. (2013) Transparent PMMA-Based Nanocomposite Using Electrospun Graphene-Incorporated PA-6 Nanofibers as the Reinforcement. Composite Science and Technology, 89, 134-141. http://dx.doi.org/10.1016/j.compscitech.2013.09.022
[10]
Jiang, S., Greiner, A. and Agarwal, S. (2013) Short Nylon-6 Nanofiber Reinforced Transparent and High Modulus Thermoplastic Polymeric Composites. Composites Science and Technology, 87, 164-169. http://dx.doi.org/10.1016/j.compscitech.2013.08.011
[11]
Jiang, S., Duan, G., Schobel, J., Agrawal, S. and Greiner, A. (2013) Short Electrospun Polymeric Nanofibers Reinforced Polyimide Nanocomposites. Composites Science and Technology, 88, 57-61. http://dx.doi.org/10.1016/j.compscitech.2013.08.031
[12]
Lin, S., Cai, Q., Ji, J., Sui, G., Yu, Y., Yang, X., Ma, Q., Wei, Y. and Deng, X. (2008) Electrospun Nanofiber Reinforced and Toughened Composites through in Situ Nano-Interface Formation. Composites Science and Technology, 68, 3322-3329. http://dx.doi.org/10.1016/j.compscitech.2008.08.033
[13]
Vidotti, H.A., Manso, A.P., Leung, V., do Valle, A.L., Ko, F. and Carvalho, R.M. (2015) Flexural Properties of Experimental Nanofiber Reinforced Composite Are Affected by Resin Composition and Nanofiber/Resin Ration. Dental Materials, 31, 1132-1141. http://dx.doi.org/10.1016/j.dental.2015.06.018
[14]
Yao, J., Li, G., Bastiaansen, C.W.M. and Peijs, T. (2015) High Performance Co-Polyimide Nanofiber Reinforced Composites. Polymer, 76, 46-51. http://dx.doi.org/10.1016/j.polymer.2015.08.054
[15]
Ahmadi, M., Masoomi, M. and Safi, S. (2015) Mechanical Property Characterization of Carbon Nanofiber/Epoxy Nanocomposites Reinforced by GMA-Grafted UHMWPE Fibers. Composites Part B, 83, 43-49. http://dx.doi.org/10.1016/j.compositesb.2015.08.006
[16]
Bansal, N.P. and Eldridge, J.I. (1999) Effects of Fiber/Matrix Interface and Its Composition on Mechanical Properties of Hi-Nicalon/Celsian Composites. NASA/TM-1999-209057, Proceedings of ICCM-12 Conference, Paris, 5-9 July 1999, 147.
