Quasi Z-source converter is a single stage soft switched power converter derived from Z-source converter topology, employing an impedance network coupling the source with the converter. The quasi Z-source source converter can buck or boost the voltage and current flow is bidirectional. The duty cycle of the switch can be adjusted to maintain constant voltage during load change. To obtain constant output voltage, proper controller design is a must. This paper presents closed loop control of quasi Z-source converter using PI controller where controller parameters are estimated using the small signal model of the entire system. The transfer function of the system with AC sweep is used to obtain appropriate proportional and integral gain constants to reduce transient dynamics and to reduce steady state error.
Peng, F.Z., Joseph, A. and Wang, J. (2005) Z-Source Inverter for Motor Drives. IEEE Transactions on Power Elec- tronics, 20, 857-863. http://dx.doi.org/10.1109/TPEL.2005.850938
[3]
Gajanayake, C.J. and Blaabjerg, J. (2007) Z-Source Inverter Based Power Quality Compensator with Enhanced Ride- Through Capability. Proceedings of EEE Industry Applications Conference, 42nd IAS Annual Meeting: Conference Record, New Orleans, 23-27 September 2007, 955-962. http://dx.doi.org/10.1109/07ias.2007.148
[4]
Fang, X. (2008) A Novel Z-Source dc-dc Converter. Proceedingof IEEE International Conference on Industrial Technology, 1-4.
[5]
Anderson, J. and Peng, F.Z. (2008) Four Quasi-Z-Source Inverters. Proceedings of IEEE Power Electronics Specialists Conerence, Rhodes, 15-19 June 2008, 2743-2749. http://dx.doi.org/10.1109/pesc.2008.4592360
[6]
Anderson, J. and Peng, F.Z. (2008) A Class of Quasi-Z-Source Inverters. Proceedings on IEEE Industry Applications Society Annual Meeting, Edmonton, 5-9 October 2008, 1-7. http://dx.doi.org/10.1109/08ias.2008.301
[7]
Cao, D. and Peng, F.Z. (2009) A Family of Z-Source and Quasi-Z-Source dc-dc Converters. Proceedings of IEEE Applied Power Electronics Conference, Washington DC, 15-19 February 2009, 1093-1101. http://dx.doi.org/10.1109/apec.2009.4802800
[8]
Ioinovici, A. (2001) Switched-Capacitor Power Electronics Circuits. IEEE Circuits and Systems Magazine, 1, 37-42. http://dx.doi.org/10.1109/7384.963467
[9]
Wang, J., Dunford, W.G. and Mauch, K. (1998) Some Novel Four-Quadrant DC-DC Converters. Proceedings on Power Electronics Specialists Conference, Fukuoka, 17-22 May 1998, 1775-1782. http://dx.doi.org/10.1109/PESC.1998.703422
[10]
Mohan, N., Underland, T.M. and Robbins, W.P. (2003) Power Electronics Converter, Applications and Design. John Wiley & Sons, Inc.
[11]
Berkovich, Y. and Ioinovici, A. (2008) Switched-Capacitor/Switched-Inductor Structures for Getting Transformerless Hybrid dc-dc PWM Converters. IEEE Transactions on Circuits and Systems I: Regular Papers, 55, 687-696. http://dx.doi.org/10.1109/TCSI.2008.916403
[12]
Jiao, Y., Luo, F.L. and Wang, F. (2011) Voltage-Lift-Type Switched-Inductor Cells for Enhancing dc-dc Boost Ability: Principles and Integrations in Luo Converter. IET Power Electronics, 4, 131-142. http://dx.doi.org/10.1049/iet-pel.2010.0021
[13]
Rashid, M.H. (1993) Power Electronics Handbook. Prentice Hall, Englewood Cliffs.
[14]
Zhu, M., Wang, T. and Luo, F.L. (2011) Analysis of Voltage-Lift-Type Boost Converters. 7th IEEE Conference on Industrial Electronics and Applications, Singapore, 18-20 July 2012, 214-219.
[15]
Raveendran, A., Paul, E. and Ommen, A.P. (2015) Quasi Z-Source DC-DC Converter with Switched Capacitor. Journal of Engineering Research and General Science, 3, 1132-1137.
