OALib Journal期刊
ISSN: 2333-9721
费用:99美元
|
|
|
球形压痕的凸起凹陷行为及其对硬度测量的影响
Keywords: 材料科学基础学科,有限元法,压痕的凸起凹陷,球形压痕,屈服应变,硬化指数
Abstract:
?采用球形压头的数值模拟表明,当应变硬化指数n大于0.23时,不论屈服应变σy/e为何值,在压入过程中所有材料的压痕周围均出现凹陷;当n小于0.23时,随着σy/e的增大,材料由凸起向凹陷转变;当σy/e大于0.02时,不论n为何值材料也都出现凹陷;当σy/e小于0.02时,材料出现凸起向凹陷的转变.当比值残余压痕深度/最大压入深度(hf/hmax)小于0.76时,材料出现凹陷,n值越大凹陷越严重;当(hf/hmax)}>0.76,若n<0.23材料出现由凸起向凹陷转变,若n>0.23材料均发生凹陷.还得到了反映凸起凹陷的表观参量c2与接触面积am之间的函数关系,分析了c2对压痕硬度误差的影响规律.
References
[1] | 1x.hernot,o.bartier,y.bekouche,ei.r.abdi,influenceofpenetrationdepthandmechanicalpropertiesoncontactradiusdeterminationforsphericalindentation,internationaljournalofsolidsandstructures,43,4136(2006)
|
[2] | 2g.das,s.ghosh,s.c.bose,s.ghosh,useofballindentationtechniquetoevaluateroomtemperaturemechanicalpropertiesofagasturbineblade,materialsscienceandengineering,424(a),330(2006)
|
[3] | 3m.dao,n.chollacoop,k.j.vanvliet,t.a.venkatesh,s.suresh,computationalmodelingoftheforwardandreverseproblemsininstrumentedsharpindentation,actamater.,49,3899(2001)
|
[4] | 4y.p.cao,j.lu,anewmethodtoextracttheplasticpropertiesofmetalmaterialsfromaninstrumentedsphericalindentationloadingcurve,actamaterialia,52,4023(2004)
|
[5] | 5d.tabor,thehardnessofmetals(oxford,universitypress,1951)p.14
|
[6] | 6y.t.cheng,c.m.cheng,whatisindentationhardness,surfaceandcoatingstechnology,133-134,417(2000)
|
[7] | 7a.bolshakov,g.m.pharr,influencesofpile-uponthemeasurementofmechanicalpropertiesbyloadanddepthsensingindentationtechniques,j.mater.res.,13,1049(1998)
|
[8] | 8y.t.cheng,c.m.cheng,scalingapproachtoconialindentationinelastic-plasticsolidswithworkhardening,j.appl.phys.,84,1284(1998)
|
[9] | 9w.c.oliver,g.m.pharr,animprovedtechniquefordetermininghardnessandelasticmodulususingloadanddisplacementindentationexperiments,j.mater.res.,7(6),1564(1992)
|
[10] | 10h.l.lee,j.h.lee,g.m.pharr,anumericalapproachtosphericalindentationtechniquesformaterialpropertyevaluation,journalofthemechanicsandphysicsofsolids,53,2046(2005)
|
[11] | 11n.w.chollacoop,computationalandexperimentalstudyofinstrumentedindentation,phdthesis,massachusettsinstituteoftechnology(2004)
|
[12] | 12j.alcala,a.c.barone,m.anglada,theinfluenceofplastichardeningonsurfacedeformationmodesaroundvickersandsphericalindents,actamater.,48,3451(2000)
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|