全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

类表面织构化镍基复合涂层的摩擦磨损性能

Keywords: 材料失效与保护,镍基复合涂层,真空熔覆,类织构,wc

Full-Text   Cite this paper   Add to My Lib

Abstract:

?在低碳钢表面添加质量分数为20%的wc和6%的石墨颗粒,采用真空熔覆方法制备出具有类织构切面形貌的镍基合金(ni0)复合涂层,研究了复合涂层的显微组织形貌及形成机理、相组成以及干摩擦条件下的摩擦磨损性能,并与镍基合金(ni0)、碳化钨增强镍基合金(ni0+20%wc)、石墨改性镍基合金(ni0+6%石墨)三种涂层进行了比较。结果表明,wc呈不连续的三维网状分布在镍基合金基体中,镍基合金主要由基体相γ-ni,铬化物硬质相crb、cr7c3、cr23c6和共晶相ni3b、ni3si构成;wc和石墨的单独加入都能提高复合涂层的摩擦磨损性能,类织构组织复合熔覆层的摩擦磨损性能优于相同组成的硬质颗粒单独弥散分布的复合熔覆层;在wc和镍基合金基体组成的类织构形貌结构和石墨润滑相的共同影响下,复合涂层比单一镍基合金涂层的耐磨性提高大约9.6倍。

References

[1]  tobarmj,alvarezc,amadojm,morphologyandcharacterizationoflasercladcompositenicrbsi-wccoatingsonstainlesssteel,surfaceandcoatingstechnology,200(22),6313(2006)
[2]  luqi,lijinguo,jintao,zhouyizhou,sunxiaofeng,huzhuangqi,competitivegrowthinbi-crystalofni-basedsuperalloysduringdirectionalsolidification,actametallurgicasinica,46(6),641(2011)(卢崎,李金国,金涛,周亦胄,孙晓峰,胡壮麒,镍基双晶高温合金定向凝固过程中的竞争生长,金属学报,46(6),641(2011))
[3]  przyby?owiczj,kusińskij,structureoflasercladdedtungstencarbidecompositecoatings,journalofmaterialsprocessingtechnology,109(1),154(2001)
[4]  badische,kirchga?nerm,influenceofweldingparametersonmicrostructureandwearbehaviourofatypicalnicrbsihardfacingalloyreinforcedwithtungstencarbide,surfaceandcoatingstechnology,202(24),6016(2008)
[5]  sariny,yilmazm,improvementofwearresistanceofwiredrawingrollswithcr-ni-b-si+wcthermalsprayingpowders,surfaceandcoatingstechnology,202(13),3136(2008)
[6]  murthyjkn,venkataramanb,abrasivewearbehaviourofwc–cocrandcr3c2-20(nicr)depositedbyhvofanddetonationsprayprocesses,surfaceandcoatingstechnology,200(8),2642(2006)
[7]  zhudingyi,guanxiangfeng,duiweizhen,preparationandstructurepropertiesofthenickel-graphitehightemperatureself-lubricatingmaterials,thechinesejournalofnonferrousmetals,14(5),707(2004)(朱定一,关翔锋,兑卫真,镍-石墨高温自润滑材料的熔炼制备及其组织性能,中国有色金属学报,14(5),707(2004))
[8]  wangqingnian,suizhongxiang,developmentofsomeforeignmetal-matrixself-lubricatingcomposites,tribology,17(1),89(1997)(王庆年,隋忠祥,国外某些金属基自润滑复合材料的开发与进展,摩擦学学报,17(1),89(1997))
[9]  liuxb,liuhq,liuyf,effectsoftemperatureandnormalloadontribologicalbehaviorofnickel-basedhightemperatureself-lubricatingwear-resistantcompositecoating,compositespartb:engineering,53,347(2013)
[10]  zhaowenjie,wangliping,xuequnji,developmentandresearchprogressofsurfacetexturingonimprovingtribologicalperformanceofsurface,tribology,31(6),622(2011)(赵文杰,王立平,薛群基,织构化提高表面摩擦学性能的研究进展,摩擦学学报,31(6),622(2011)
[11]  hutianchang,hulitian,dingqi,tribologicalpropertiesoflasertexturedsurfacesof45#steelunderdryfriction,tribology,30(1),46(2010)(胡天昌,胡丽天,丁奇,45#钢表面激光织构化及其干摩擦特性研究,摩擦学学报,30(1),46(2010))
[12]  hutianchang,hulitian,zhangyongsheng,preparationofcompositelubricationstructureanditstribologicalpropertieson45#steelsurface,tribology,32(1),14(2012)(胡天昌,胡丽天,张永胜,45#钢表面复合润滑结构的制备及其摩擦性能研究,摩擦学学报,32(1),14(2012))
[13]  liyanaget,fisherg,gerlichap,influenceofalloychemistryonmicrostructureandpropertiesinnicrbsioverlaycoatingsdepositedbyplasmatransferredarcwelding(ptaw),surfaceandcoatingstechnology,205(3),759(2010)
[14]  songwm,yanggr,haoy,lujj,microstructureandwearbehaviourofni-basedsurfacecoatingoncoppersubstrate,wear,262(7),868(2007)
[15]  j.rodriguez,a.martin,r.fernández,j.e.fernández,anexperimentalstudyofthewearperformanceofnicrbsithermalspraycoatings,wear,255(7),950(2003)
[16]  wangh,xiawm,jinys,astudyonabrasiveresistanceofni-basedcoatingwithawchardphase,wear,195(1),47(1996)
[17]  yangguirong,zhaohu,songwenming,lijian,maying,wearbehaviourofni-basedcompositecoatingwithdirectionalsolidificationstructure,chinesejournalofmaterialsresearch,27(3),279(2013)(杨贵荣,赵虎,宋文明,李健,马颖,定向凝固镍基复合涂层的摩擦磨损性能,材料研究学报,27(3),279(2013))

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133