全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
热力发电  2015 

合成气微型燃气轮机旋流燃烧特性数值模-

, PP. 15-20

Keywords: 微型燃气轮机,合成气,旋流强度,燃烧特性,数值模拟

Full-Text   Cite this paper   Add to My Lib

Abstract:

以某合成气微型燃气轮机为例,通过改变其燃烧室旋流喷嘴的角度增加旋流强度,并采用数值模拟的方法从主燃区旋流强度及值班区旋流强度两方面对比分析了微型燃气轮机的旋流燃烧特性,结果表明:随着主燃区旋流强度的增加,回流区面积明显增大,燃料、空气均匀混合并迅速燃烧;但并非旋流强度越大越好,当主燃区旋流强度增大到一定程度时,回流区已经影响到了燃烧室出口处的气流流动,不利于流场的稳定,因此存在最佳的旋流角度使燃烧达到最佳的效果;值班区旋流强度的改变对燃烧流场影响不大。

References

[1]  张雪梅,胡小坚,李伟奇,等.微型燃气轮机分布式能源系统动态能耗分析与优化应用[j].热力发电,2010,38(1):1-5.zhangxuemei,huxiaonjian,liweiqietal.dynamicenergyconsumptionanalysisandoptimizedoperationofdistributedenergysystembasedonmicro-gas-turbines[j].thermalpowergeneration,2010,38(1):1-5.
[2]  张文普,丰镇平.微型燃气轮机燃烧室性能的数值研究[j].燃气轮机技术,2003,16(2):26-30.zhangwenpu,xinfengping.numericalstudiesofmicrogasturbinecombustorperformance[j].journalofgasturbinetechnology,2003,16(2):26-30.
[3]  gobbatop,masim,toffoloa,etal.numericalsimulationofahydrogenfuelledgasturbinecombustor[j].internationaljournalofhydrogenenergy,2011,36(13):7993-8002.
[4]  崔玉峰,徐纲,聂超群,等.数值模拟在合成气燃气轮机燃烧室设计中的应用[j].中国电机工程学报,2006,26(16):109-116.cuiyufeng,xugang,niechaoqun,etal.applicationofnumericalsimulationinthedesignofgasturbinecombustorforburningsyngas[j].proceedingsofthecsee,2006,26(16):109-116.
[5]  曹常青,付忠广,卢可.合成气微型燃气轮机燃烧室优化设计及数值模拟[j].中国电力,2014,47(2):100-105.caochangqing,fuzhongguang,luke.designandnumericalsimulationofmicrogasturbinecombustorburningsyngas[j].electricpower,2014,47(2):100-105.
[6]  laimk,reynoldsrs,armstrongj.cfd-based,parametric,designtoolforgasturbinecombustorsfromcompressordeswirlexittoturbineinlet[c]//asmeturboexpo2002:powerforland,sea,andair.americansocietyofmechanicalengineers,2002:545-552.
[7]  tangiralave,tolpadiak,danisam,etal.parametricmodelingapproachtogasturbinecombustiondesign[c]//proceedingsofasmeturboexpo2000.munich,germany,2000.
[8]  dudeboutr,reynoldsb,molla-hosseinik.integratedprocessforcfdmodelingandoptimizationofgasturbinecombustors[c]//proceedingsofasmeturboexpo2004:powerforland,seaandair,vienna,austria,2004.
[9]  汪凤山.低nox排放微型燃气轮机燃烧室的数值模拟及实验研究[d].北京:中国科学院,2009.wangfengshan.numericalandexperimentalinvestigationonalownoxemissioncombustorformicrogasturbine[d].beijing:chineseacademyofsciences,2009.
[10]  齐海帆.燃烧室头部设计对燃烧室性能影响研究[d].南京:南京航空航天大学,2012.qihaifan.researchontheinfluenceofcombustordomedesignonthecombustionperformance[d].nanjing:nanjinguniversityofaeronauticsandastronautics,2012.
[11]  ganjihb,ebrahimir.numericalestimationofblowout,flashback,andflamepositioninmitmicrogas-turbinechamber[j].chemicalengineeringscience,2013,104:857-867.
[12]  王福珍,王能,黄帆,等.微型燃气轮机富氧燃烧室数值研究[j].热力发电,2014,43(4):76-81.wangfuzhen,wangneng,huangfan,etal.numericalstudyonoxygen-enrichedcombustionchamberofmicrogasturbines[j].thermalpowergeneration,2014,43(4):76-81.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133