G K Klute,C F Kallfelz,J M Czerniecki.Mechanical properties of prosthetic limbs:Adapting to the patient[J].Journal of Rehabilitation Research & Development,2001,38(8):299-307.
[2]
J Engel,J Chen,C Liu.Development of polyimide exible tactile sensor skin[J].Journal of Micromechanics and Microengineering,2003,13(3):359-362.
[3]
C Domenici,D De Rossi,A Bacci,S Bennati.Shear stress detection in an elastic layer by a piezoelectric polymer tactile sensor[J].IEEE Transactions on,Electrical Insulation,1989,24(6):1077-1081.
[4]
Y Mo,Y Okawa,M Tajima,T Nakai,N Yoshiike,K Natukawa.Micro-machined gas sensor array based on metal lm micro-heater[J].Sen-sors and Actuators B:Chemical,2001,79(2-3):175-181.
[5]
M J Schoning,M Thust,M Muller-Veggian,P Kordos,H Luth.A novel silicon-based sensor array with capacitive eis structures[J].Sensors and Actuators B:Chemical,1998,47(1-3):225-230.
[6]
张国华.电容式压力传感器电路的温度补偿[J].电子学报,1996,24(5):10-12. Zhang G H.Temperature compensation of a capacitive pressure transducer[J].Acta Electronica Sinica,1996,24(5):10-12.(in Chinese)
[7]
C L Ogden,C D Fryar,M D Carroll,K M Flegal.Mean body weight,height,and body mass index,united states 1960-2002[J].Advance Data,2004(347):1-17.
[8]
J Sanders.Interface mechanics in external prosthetics:review of interface stress measurement techniques[J].Medical and Biological Engineering and Computing,1995,(33):509-516.
[9]
J Sanders,C Daly.Measurement of stresses in three orthogonal directions at the residual limb-prosthetic socket interface[J].Rehabilitation Engineering,IEEE Transactions on,1993,1(2):79-85.
[10]
J Sanders,S Zachariah,A Baker,J Greve,C Clinton.Effects of changes in cadence,prosthetic componentry,and time on interface pressures and shear stresses of three trans-tibial amputees[J].Clinical Biomechanics,2000,15(9):684-694.
[11]
G C Lisensky,D J Camphell,K J Beckman.Replication and compression of bulk and surface structures with polydimethylsiloxane elastomer[J].Journal of Chemical Education,1999,75(4):537-541.
[12]
J Greener,W Li,J Ren,D Voicu,V Pakharenko,T Tang,E Ku-macheva.Rapid,cost-efficient fabrication of micro uidic reactors in thermoplastic polymers by combining photolithography and hot embossing[J].Lab Chip,2010,(10):522-524.
[13]
B D Gates,G M Whitesides.Replication of vertical features smaller than 2 nm by soft lithography[J].Journal of the American Chemical Society,2003,125(49):986-987.
[14]
刘志泉.我国肢体残疾人概况[J].中国康复医学杂志,2003,18(8):493-494.
[15]
S Lin,P Tung,N E Huang.Data analysis using a combination of independent component analysis and empirical mode decomposition[J].Physical Review E,2009,79(6):066705.
[16]
J E Sanders,C H Daly.Measurement of stresses in three orthogonal directions at the residual limb-prosthetic socket interface[J].IEEE Trans.On Rehabilitation Engineering,1993,1(2):79-85.
[17]
J E Sanders,S B Mitchell,Y-N Wang,K Wu.An explant model for the investigation of skin adaptation to mechanical stress[J].IEEE Trans Biomed Eng.2002,49(12)1626-1631.
[18]
S C Fawcett,R F Keltie.A dual-channel ber optic displacement probe for structural power ow measurements[J].Sensors and Actuators,1989,19(4):311-325.
[19]
姚素英,曲宏伟,张维新,等.多晶硅双岛压力传感器应力分布的模拟计算[J].电子学报,1999,27(11):68-70. Yao S Y,Qu H W,Zhang W X,Mao G R,Li Y S.The computer simulation for the strain distribution of the twin isles polysilicon pressure sensor[J].Acta Electronica Sinica,1999,27(11):68-70.(in Chinese)
[20]
D G Armstrong,E J Peters,K A Athanasiou,L A Lavery.Is there a critical level of plantar foot pressure to identify patients at risk for neuropathic foot ulceration[J].The Journal of Foot and Ankle Surgery,1998,37(4):303-307.
[21]
G M C Peter R Cavanagh,Jan S Ulbrecht.New developments in the biomechanics of the diabetic foot[J].Diabetes Metabolism Research and Reviews,2000,16(S1):2000.
[22]
M Yavuz,G Botek,B L Davis.Plantar shear stress distributions:Comparing actual and predicted frictional forces at the foot ground interface[J].Journal of Biomechanics,2007,40(13):3045-049.
[23]
J Sanders,S Mitchell,Y-N Wang,K Wu.An explant model for the investigation of skin adaptation to mechanical stress[J].Biomedical Engineering,IEEE Transactions on,2002,49(12):1626-1631.
[24]
J Sanders,D Lam,A J Dralle,R Okumura.Interface pressures and shear stresses at thirteen socket sites on two persons with transtibial amputation[J].Journal of Rehabilitation Research and Development,1997,34(1):19-43.
[25]
Marilyn,Lord.Spatial resolution in plantar pressure measurement[J].Medical Engineering & Amp;Physics,1997,19(2):140-144.
[26]
J S Choi,K Y Cho,J-H Yim.Micro-patterning of vapor-phase polymerized poly(3,4-ethylenedioxythiophene) (pedot) using ink-jet printing soft lithography[J].European Polymer Journal,2010,46(3):389-396.
[27]
F Zhang,T Nyberg,O Ingangs.Conducting polymer nanowires and nanodots made with soft lithography[J].Nano Letters,2002,2(12):1373-1377.
[28]
F Hua,Y Sun,A Gaur,M A Meitl,L Bilhaut,L Rotkina,J Wang,P Geil,M Shim,J A Rogers,A Shim.Polymer imprint lithography with molecular-scale resolution[J].Nano Letters,2004,4(12):2467-2471.
