Marianne Francois,Wei Shyy.Computations of dynamics with the immersed boundary method,part 2:Drop impact and heat transfer[J].Numerical Heat Transfer,2003,44(2):119-143.
[3]
A P Newbery,T Rayment,P S Grant.A particle image velocimetry investigation of in-flight and deposition behavior of steel droplets during electric arc spray forming[J].Materials Science and Engineering,2004,383(A):137-145.
黄春跃,周德检,吴兆华.基于正交试验设计法的塑封球栅阵列器件焊点工艺参数与可靠性关系研究[J].电子学报,2005,33 (5):788-792. Huang Chun-yue,Zhou De-jian,Wu Zhao-hua.Study on the relationships between solder joint process parameters and reliability of plastic ball grid array component based on the orthogonal experiment design[J].Acta Electronica Sinica,2005,33 (5):788-792.(in Chinese)
Lai ZhongMin,Xue SongBai,Han XiangPeng,et al.Study on microstructure and property of brazed joint of AgCuZn-X(Ga,Sn,In,Ni) brazing alloy[J].Rare Metal Materials and Engineering,2010,39(3):0397-0400.
[9]
肖祥慧,彭敏放,黎福海,等.磁头内置DFH控制元件可靠性的有限元分析[J].电子学报,2012,40 (10):2140-2144. Xiao Xiang-hui,Peng Min-fang,Li Fu-hai,et al.The finite element analysis forreliability of built-DFH in magnetic head[J].Acta Electronica Sinica,2012,40(10):2140-2144.(in Chinese)
[10]
Gao Yan-fang,et al.Electrochemical corrosion of Sn-0.75Cu solder joints in NaCl solution[J].Transactions on Nonferrous Met Soc China,2012,22(4):977-982.
[11]
N Nikolopoulos,et al.Normal impingement of a droplet onto a wall film:A numerical investigation[J].International Journal of Heat and Fluid Flow,2005,26(1):119-132.
[12]
Xiao Feng,Liu Lanxiao,et al.Measurement and analysis molten nickel-cobalt alloy surface tension[J].Rare Metal Materials and Engineering,2008,37 (2):255-258.
[13]
Purvis,R-Smith F T.Droplet impact on water layers:Post-impact analysis and computations[J].Philosophical Transactions on Mathematical Physical and Engineering Sciences,2005,363 (1830):1209-1221.
[14]
Yingzhi Chu,Wenlai Ma,et al.Crater forming process by liquid drop impacting liquid multi-layer target[J].Physics and Chemistry of Liquids,2004,42(2):135-146.
[15]
V Roisman,Romain Rioboo,Cameron Tropea,Ilia.Normal impact of a liquid drop on a dry surface:Model for spreading and receding[J].Proceedings of the Royal Society of London -A,2002,458 (2022):1411-1430.
[16]
Heng Xie,Seiichi Koshizuka,Yoshiaki Oka.Simulation of drop deposition process in annular mist flow using three-dimensional particle method[J].Nuclear Engineering and Design,2005,235(16):1687-1697.
[17]
吴敏,刘政军.磁场对Sn-9Zn钎料组织、显微硬度及电化学腐蚀的影响[J].中国有色金属学报,2012,22(2):485-489. Wu Min,Liu Zheng-jun.Effects of magnetic fields on microstructure,microhardness and electrochemical corrosion of Sn-9Zn solder[J].The Chinese Journal of Nonferrous Metals,2012,22(2):485-489.(in Chinese)
[18]
C Weiss.The liquid deposition fraction of sprays impinging vertical walls and flowing films[J].International Journal of Multiphase Flow,2005,31(1):115-140.
[19]
N Nikolopoulos,et al.Normal impingement of a droplet onto a wall film:A numerical investigation[J].International Journal of Heat and Fluid Flow,2005,26(1):119-132.
[20]
Saeid Shakeri,Sanjeev Chandra.Splashing of molten tin dropletson a rough steel surface[J].International Journal of Heat and Mass Transfer,2002,45(23):4561-4575.
[21]
R Ghafouri-Azar,J Mostaghimi,S Chandra.Numerical study of impact and solidification of a droplet over a deposited frozen splat[J].International Journal of Computational Fluid Dynamics,2004,18(2):133-138.
