全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

中生代川东褶皱带的数值模拟:滑脱带深度对地台盖层褶皱型式的影响

, PP. 622-632

Keywords: 数值模拟,褶皱带,褶皱型式,滑脱带,地台盖层

Full-Text   Cite this paper   Add to My Lib

Abstract:

纵弯褶皱作用是中生代川东褶皱带的主导宏观变形机制,造成了区内各褶皱近等间距相间排列,褶皱轴延伸稳定,区域性逆冲断层不发育。本文利用FLAC6.0软件模拟了在不同变形基底厚度的情形下该褶皱带的形成过程。无论变形基底厚度如何变化,盖层浅处(三叠系顶部褶皱面)始终出现隔槽式褶皱,意味着影响褶皱发育的滑脱带在隔档式和隔槽式褶皱区是不一样的,分别处于盖层内和基底内。随着变形基底厚度加大,盖层深处(志留系顶部褶皱面)由隔档式褶皱逐渐转变成隔槽式褶皱,尤其是在变形基底厚度为3~4km的情形下,盖层深部出现的褶皱型式与真实的隔槽式褶皱非常相似。在志留系为滑脱带的情形下,盖层浅部呈现出与真实的隔档式褶皱相似的形态特征。这些认识得到了该区地震反射剖面解释成果的证实。

References

[1]  丁道桂, 刘光祥, 吕俊祥, 潘文蕾. 2007. 扬子板块海相中古生界盆地的递进变形改造. 地质通报, 26(9): 1178-1188.
[2]  丁道桂, 朱樱, 陈风良, 刘斌. 1991. 中、下扬子区古生代盆地基底拆离式改造与油气领域. 石油与天然气地质, 12(4): 376-386.
[3]  冯常茂, 刘进, 宋立军. 2008. 中上扬子地区构造变形带成因机制及有利油气勘探区域预测. 地球学报, 29(2): 199-204.
[4]  胡召齐, 朱光, 刘国生, 张必龙. 2009. 川东“侏罗山式”褶皱带形成时代: 不整合面的证据. 地质论评, 55(1): 32-42.
[5]  李本亮, 孙岩, 朱文斌, 郭继春, 温世红. 2001. 川东地区层滑参数系统研究. 西南石油学院学报, 23(1): 29-34.
[6]  李忠权, 冉隆辉, 陈更生, 路中侃, 段新国. 2002. 川东高陡构造成因地质模式与含气性分析. 成都理工学院学报, 29(6): 605-609.
[7]  林舸, Zhang Y H, 王岳军, 郭锋, 范蔚茗, 阎义. 2004. 华北陆块岩石圈减薄作用: 热薄化与机械拉伸的数值模拟研究. 大地构造与成矿学, 28(1): 8-14.
[8]  刘尚忠. 1995. 川东薄皮构造模式之我见. 四川地质学报, 15(4): 264-267.
[9]  罗志立. 1998. 四川盆地基底结构的新认识. 成都理工学院学报, 25(2): 191-200.
[10]  马力, 陈焕疆, 甘克文, 徐克定, 许效松, 吴根耀, 叶舟, 梁兴, 吴少华, 秋蕴玉, 章平澜. 2004. 中国南方大地构造和海相油气地质. 北京: 地质出版社: 591-592.
[11]  马丽芳. 2002. 中国地质图集. 北京: 地质出版社: 237-291.
[12]  梅廉夫, 刘昭茜, 汤济广, 沈传波, 凡元芳. 2010. 湘鄂西?川东中生代陆内递进扩展变形来自裂变径迹和平衡剖面的证据. 地球科学――中国地质大学学报, 35(2): 161-174.
[13]  彭美丽, 易金, 姚蓉, 吴川, 朱江建, 王岳军, 孙珍, 林舸. 2011. 华南多层推滑构造系的物理模拟实验. 大地构造与成矿学, 35(2): 198-206.
[14]  舒良树. 2012. 华南构造演化的基本特征. 地质通报, 31(7): 1035-1053.
[15]  四川省地质矿产局. 1991. 四川省区域地质志. 北京: 地质出版社: 7-107.
[16]  孙岩, 刘德良, 朱文斌, 郭继春, 李本亮, 郭建, 王锋, 赵忠岩. 2005. 上扬子地壳区域性地层岩石物性力学参数与滑动层位关系研究. 地质科学, 40(4): 532-538.
[17]  万天丰, 赵庆乐. 2012. 中国东部构造?岩浆作用的成因. 中国科学(D辑), 42(2): 155-163.
[18]  王鸿祯. 1985. 中国古地理图集. 北京: 地图出版社: 9-107.
[19]  徐政语, 姚根顺, 林舸, 郭庆新. 2006. 江汉叠合盆地及邻区中生代以来盆山耦合数值模拟研究. 大地构造与成矿学, 30(3): 305-311.
[20]  颜丹平, 金哲龙, 张维宸, 刘少峰. 2008. 川渝湘鄂薄皮构造带多层拆离滑脱系的岩石力学性质及其对构造变形样式的控制. 地质通报, 27(10): 1687-1697.
[21]  Burbidge D R and Braun J. 2002. Numerical models of the evolution of accretionary wedges and fold-and-thrust belts using the distinct-element method. Geophysical Journal International , 148: 542-561.
[22]  Burov E and Toussaint G. 2007. Surface processes and tectonics: Forcing of continental subduction and deep processes. Global and Planetary Change, 58: 141-164.
[23]  Davis G H. 1978. Laramide folding and faulting in southeastern Arizona. American Journal of Science, 279: 543-569.
[24]  Hobbs B E, Zhang Y H, Ord A and Zhao C. 2000. Application of coupled deformation, fluid flow, thermal and chemical modelling to predictive mineral exploration. Journal of Geochemical Exploration, 69/70: 505-509.
[25]  Massoli D, Koyi H A and Barchi M R. 2006. Structural evolution of a fold and thrust belt generated by multiple decollements: Analogue models and natural examples from the Northern Apennines (Italy). Journal of Structural Geology, 28: 185-199.
[26]  Ord A. 1991. Deformation of rock: A pressure-sensitive, dilatant material. Pure and Applied Geophysics, 137: 337-366.
[27]  Strayer L M and Hudleston P J. 1997. Numerical modeling of fold initiation at thrust ramps. Journal of Structural Geology, 19: 551-566.
[28]  Touloukian Y S, Judd W R and Roy R F. 1981. Physical Properties of Rocks and Minerals. McGray-Hill Book Company: 35-109.
[29]  Wang Z X, Zhang J, Li T, Xie G A and Ma Z J. 2010. Structural analysis of the multilayer detachment folding in eastern Sichuan province. Acta Geologica Sinica, 84(3): 497-514.
[30]  Zhang Y H, Lin G, Rober P and Ord A. 2007. Numerical modelling of deformation and fluid flow in the Shuikoushan District, Hunan Province, South China. Ore Geology Reviews, 31: 261-278.
[31]  Zhang Y H, Mancktelow N S, Hobbs B E, Ord A and Mühlhaus H B. 2000. Numerical modelling of single-layer folding: Clarification of an issue regarding the possible effect of computer codes and the influence of initial irregularities. Journal of Structural Geology, 22: 1511-1522.
[32]  丁道桂, 郭彤楼, 翟常博, 吕俊祥. 2005. 鄂西?渝东区膝折构造. 石油实验地质, 27(3): 205-210.
[33]  丁道桂, 刘光祥. 2007. 扬子板内递进变形――南方构造问题之二. 石油实验地质, 29(3): 238-246.
[34]  冯向阳, 孟宪刚, 邵兆刚, 王建平, 朱大岗. 2003. 华南及邻区有序变形及其动力学初探. 地球学报, 24(2): 115-120.
[35]  戈红星, Bruno C V, Martin P A J. 2004. 前陆褶皱冲断带厚皮缩短盐构造运动的物理模拟. 高校地质学报, 10(1): 39-49.
[36]  颜丹平, 汪新文, 刘友元. 2000. 川鄂湘边区褶皱构造样式及其成因机制分析. 现代地质, 14(1): 37-43.
[37]  袁玉松, 孙冬胜, 周雁, 汪新伟, 李双建, 张荣强, 沃玉进. 2010. 中上扬子地区印支期以来抬升剥蚀时限的确定. 地球物理学报, 53(2): 362-369.
[38]  张必龙, 朱光, JIANG Dazhi, 胡召齐, 向必伟, 张力, 陈印. 2009. 川东“侏罗山式”褶皱的数值模拟及成因探讨. 地质论评, 55(5): 701-711.
[39]  张文佑, 钟嘉猷, 李隐, 马福臣. 1977. 断块构造内部与断块边缘力学机制的研究 // 国际交流地质学术论文集(1). 北京: 地质出版社: 243-348.
[40]  Yan D P, Zhang B, Zhou M F, Wei G Q, Song H L and Liu S F. 2009. Constraints on the depth, geometry and kinematics of blind detachment faults provided by fault-propagation folds: An example from the Mesozoic fold belt of South China. Journal of Structural Geology, 31: 150-162.
[41]  Yan D P, Zhou M F, Song H L, Wang X W and John M. 2003. Origin and tectonic significance of a Mesozoic multi-layer over-thrust system within the Yangtze block (South China). Tectonophysics, 361: 239-254.
[42]  Zhou Y, Lin G and Yang L Q. 2008. Numerical simulation of rock deformation during the mineralization of the Xiangshan uranium deposit, Jiangxi province, south China. Journal of China University of Mining & Technology, 18: 342-346.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133