Chidester S K, Green L G, Lee C G.A Frictional Work Predictive Method for the Initiation of Solid High Explosives from Low Pressure Impacts[C]∥10th International Detonation Symposium, Office of Naval Research, Boston MA, 1993: 785-792。
[3]
韩勇, 向永, 韩敦信, 等.Steven试验中模拟材料D-90031力学响应的数值模拟[J].含能材料, 4,2(z2): 545-547.HAN Yong, XIANG Yong, HAN Dun-xin, etal.The numerical modeling of dynamical response of D-90031 in STEVEN test[J].Chinese Journal of Energetic Materials(Hanneng Cailiao)(sup), 4,2(Z2): 545-547.
[4]
代晓淦, 申春迎, 文玉史.模拟跌落撞击下PBX-2炸药的响应[J].含能材料, 1,9(2): 209-212.DAI Xiao-gan, SHEN Chun-ying, WEN Yu-shi.Reaction of PBX-2 explosive under simulated drop impact[J].Chinese Journal of Energetic Materials(Hanneng Cailiao), 1,9(2): 209-211.
[5]
Lawrence livermore national laboratory.LS-DYNA Μser\'s Manual[M].California, University of California, Lawrence Livermore National Laboratory, 2001.
[6]
Tarver C M, Hallquist J O, Erickson L M.Modeling of short pulse duration shock initiation of solid explosive[C]∥Proceedings of 8th Symposium (International) on Detonation, Albuquerque: [s.n.].1985: 951-961.
[7]
Lee E, Breithaupt D, Mcmillan C, et al.The motion of thin metal walls and the equation of state of detonation products, UCRL-91490[R].Albuquerque: [s.n.].1985.
[8]
柯加山.冲击条件下炸药的起爆现象研究[D].北京: 北京理工大学, 2002.
[9]
白金泽.LS-DYNA3D理论基础与实例分析[M].北京: 科学出版社, 2005: 47-49.BAI J Z.LS-DYNA 3D theory foundation and case analysis[M].Beijing: Science press, 2005:47-49.
[10]
陶文栓, 李永堂.热工程学[M].武汉: 武汉理工大学出版社, 2001.TAO W S, LI Y T.Thermal engineering[M].Wuhan: Wuhan University of Technology Press, 2001.
[11]
HU Zhong, ZHU Li-Hua, WANG Bei-yi, et al.Computer simulation of the deep extrusion of a thin-walled cup using the thermo-mechanically coupled elasto-platic FEM[J].Journal of Materials Processing Technology, 0,2(1): 128-137.
