张伟斌,田勇,杨仍才,等.RDX晶体颗粒压制密度分布的μCT试验研究[J].含能材料,2012,20(5): 565-570.ZHANG Wei-bin, TIAN yong, YANG Reng-cai, et al.Study on pressing density distribution of RDX crystals with a cone beam micro focus computed tomography[J].Chinese Journal of Energetic Materials(Hanneng Cailiao), 2012,20(5): 565-570.
[2]
张伟斌, 杨雪海, 杨仍才, 等.单向温模压TATB基高聚物粘结炸药X射线微层析成像[J].含能材料,2014,22(2): 202-205.ZHANG Wei-bin, YANG Xue-hai, YANG Reng-cai, et al.X-ray Micro tomography of TATB based polymer bonded explosives under unidirectional warm die compaction[J].Chinese Journal of Energetic Materials(Hanneng Cailiao),2014,22(2): 202-205.
[3]
兰琼, 戴斌, 杨白凤, 等.PBX裂纹愈合行为探索研究[J].含能材料,2013,21(2): 205-208.LAN Qiong, DAI Bin, YANG Bai-feng, et al.Healing of cracks in PBX by thermal pressure aging treatment[J].Chinese Journal of Energetic Materials(Hanneng Cailiao), 2013,21(2): 205-208.
[4]
田勇, 刘石, 张伟斌, 等.TNT炸药熔铸结晶成型过程μCT试验研究[J].含能材料, 2009,17(2): 173-177.TIAN Yong, LIU Shi, ZHANG Wei-bin, et al.Experimental study on crystallization of casting TNT explosive during solidification molding by high-resolution X-ray computed tomography[J].Chinese Journal of Energetic Materials(Hanneng Cailiao),2009,17(2): 173-177.
[5]
何映平.天然橡胶加工学[M].海南: 海南出版社,2007.HE Ying-ping.Principles of natural rubber processing[M].Hainan: Hainan Press,2007.
[6]
Renlund A M,Miller J C,Trott W M,et al.Characterization of thermally degraded energetic materials[R].DE98003979,1997.
[7]
Rae P J,Goldrein H T,Palmer S J P,et al.Studies of the failure mechanisms of polymer-bonded explosives by high resolution moiré interferometry and environmental scanning electron microscopy[A].Proceedings of 11th Symposium on Detonation[C]∥Snowmass,UT,1998,66-75.
[8]
Baillou F,Dartyge J M,Spyckereelle C,et al.Influence of crystal defects on sensitivity of explosives[C]∥Tenth Symposium (International)on Detonation,Boston,1993: 816-823.
[9]
曹阳, 聂福德, 李越生.TATB基复合材料的微观结构分析[J].火炸药学报, 2004,27(3): 58-61.CAO Yang, NIE Fu-de, LI Yue-sheng.Analysis of microstructure of TATB based PBX[J].Chinese Journal of Explosives & Propellants,2004,27(3): 58-61.
[10]
梁华琼, 韩超, 雍炼, 等.高聚物黏结炸药的压制成型性[J].含能材料,2010,33(4): 44-47.LIANG Hua-qiong, HAN Chao, YONG Lian, et al.Pressing mechanism of polymer-bonded explosive[J].Chinese Journal of Energetic Materials(Hanneng Cailiao), 2010,33(4): 44-47.
[11]
张鹏, 赵峰, 白树林.PBX代用材料动态力学行为和微观结构的实验研究[J].高压物理学报, 2007,21(1): 20-28.ZHANG Peng, ZHAO Feng, BAI Shu-lin.Experimental study on the microstructures and dynamic behavior of a PBX substitute material[J].Chinese Journal of High Pressure Physics, 2007,21(1): 20-28.
[12]
温茂萍, 李明, 庞海燕, 等.炸药件力学性能各项同异性试验研究[J].含能材料,2006,14 (4): 286-289.WEN Mao-ping, LI Ming, PANG Hai-yan, et al.Study on mechanical isotropic of PBX[J].Chinese Journal of Energetic Materials(Hanneng Cailiao),2006,14(4): 286-289.
[13]
温茂萍, 庞海燕.等静压与模压JOB-9003炸药力学性能比较研究[J].含能材料,2004,12(6): 338-341.WEN Mao-ping,PANG Hai-yan.Comparative study on mechanical properties of two kinds of JOB-9003 shaped by is static pressing and mould pressing[J].Chinese Journal of Energetic Materials(Hanneng Cailiao),2004,12(6): 338-341.
[14]
梁华琼, 周旭辉, 唐常良, 等.HMX钢模压制的微观结构演变的研究[J].含能材料,2008(2): 188-190.LIANG Hua-qiong, ZHOU Xu-hui, TANG Chan- liang, et al.Micro-structural evolution of HMX during pressing[J].Chinese Journal of Energetic Materials(Hanneng Cailiao), 2008(2): 188-190.
[15]
陈鹏万,丁雁生.高聚物黏结炸药的力学行为及变形破坏机理[J].含能材料,2000,8(4): 161-164.CHEN Peng-wan, DING Yan-sheng.Mechanical behavior and deformation and failure mechanisms of polymer bonded explosives[J].Chinese Journal of Energetic Materials(Hanneng Cailiao), 2000,8(4): 161-164.
[16]
Baer M R.Modeling heterogeneous energetic materials at the mesoscale[J].Thermochimica Acta,2002,384: 351-367.
[17]
Proud W G,Palmer S J P,Field J E,et al .AFM studies of PBX systems[J].Thermochimica Acta,2002,384: 245-251.
[18]
Antoine E D M,Van der Heijden,Richard H B.Crystallization and characterization of RDX,HMX,and CL-20[J].Crystal Growth & Design,2004,4(5): 999-1007.
[19]
Proud William G,Walley Stephen M,Williamson David M,et al.Recent trends in research on energetic materials at Cambridge[J].Central European Journal of Energetic Materials,2009,6(1): 67-102.
[20]
Peterson P D, Fletcher M A,Roemer R L.Influence of pressing intensity on the microstructure of PBX9501[J].J Energ Mater,2004,21: 247-260.
[21]
Burnside N J,Son S F,Asay B W,et al.Particle characterization of pressed granular HMX[J].Shock Compression of Condensed Matter,1997: 571.
[22]
陈鹏万.高聚物粘结炸药的细观结构和力学性能[R].中科院力学所博士后工作报告,2001.CHEN Peng-wan.The microstructure and mechanical properties of PBX[R].The postdoctoral research reports of institute of mechanics,Chinese Academy of Sciences,2001.
[23]
陈鹏万, 黄风雷.含能材料损伤理论及应用[M].北京: 北京理工大学出版社,2006.CHEN Peng-wan, HUANG Feng-lei.Damage theory and applications of energetic materials[M].Beijing: Beijing Institute of Technology Press,2006.
