王娜,沈瑞琪,叶迎华. 霍普金森杆测量火工品过载情况的研究与数值模拟[J]. 火工品,2004(1): 42-47. WANG Na,SHEN Rui-qi,YE Ying-hua. Study on the measurement of over-loaded initiator by Hopkinson bar and numerical simulation[J]. Initiators & Pyrotechnics,2004(1): 42-47.
[3]
胡时胜. Hopkinson压杆实验技术的应用进展[J]. 实验力学,2005,20(4): 589-594. HU Shi-sheng. The application development of experimental technique of Hopkinson pressure bar[J]. Journal of Experimental Mechanics,2005,20(4): 589-594.
[4]
邓强,吴艳霞,沈瑞琪,等.波形整形器在火工品高过载试验中的应用[J].火工品,2005(5): 12-15. DENG Qiang,WU Yan-xia,SHEN Rui-qi,et al. Application of pulse shaper in over-loading test for initiator[J]. Initiators & Pyrotechnics,2005(5): 12-15.
[5]
杨光强,任炜,商弘藻. 高过载下桥丝电雷管失效模式与机理初步研究[J]. 火工品,2010(2): 39-43. YANG Guang-qiang,REN Wei,SHANG Hong-zao. Study on failure mode and mechanism of detonator under high overload[J]. Initiators & Pyrotechnics,2010(2): 39-43.
[6]
马晓青. 冲击动力学[M]. 北京: 北京理工大学出版社,1992.
[7]
郑连清,孙才新. 火工品压药压力的控制新方法[J]. 机械工程学报,2008,42(6): 219-223. ZHENG Lian-qing,SUN Cai-xin. New method of pressure control for initiating explosive device pressing powder[J]. Chinese Journal of Mechanical Engineering,2008,42(6): 219-223.
[8]
胡焕性. 破甲战斗部精密装药基础及实验研究[J]. 火炸药学报,1999(1): 1-5. HU Huan-xing. Elements of hollow-charge warhead precise-charge and its experiment[J]. Chinese Journal of Explosives & Propellants,1999(1): 1-5.
[9]
张学舜,沈瑞琪.火工品动态着靶模拟仿真技术研究[J].火工品,2003(4): 1-4. ZHANG Xue-shun,SHEN Rui-qi. Study on dynamic touch-target analog simulation technique for initiating explosive devices[J]. Initiators & Pyrotechnics,2003(4): 1-4.
[10]
邓琼,李玉龙,索涛,等. 火工品高过载动态力学性能测试方法研究[J]. 火工品,2007(1): 28-31. DENG Qiong,LI Yu-long,SUO Tao,et al. Test method on dynamic mechanical behavior of initiating explosive device under high acceleration[J]. Initiators & Pyrotechnics,2007(1): 28-31.
[11]
张学舜,沈瑞琪,邓强,等. 雷管抗过载能力的安全性评价[J]. 火工品,2004(2): 4-7. ZHANG Xue-shun,SHEN Rui-qi,DENG Qiang,et al. Test and evaluation of safety of detonator in shock environments[J]. Initiators & Pyrotechnics,2004(2): 4-7.
