全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
含能材料  2013 

双模战斗部结构正交优化设计

DOI: 10.3969/j.issn.1006-9941.2013.01.018

Keywords: 爆炸力学,弧锥结合罩,参数优化,正交设计,数值模拟

Full-Text   Cite this paper   Add to My Lib

Abstract:

应用LS-DYNA仿真软件,结合正交优化设计方法,对弧锥结合形药型罩双模战斗部进行了正交优化设计研究。分析了结构参数(圆弧曲率半径、锥角、药型罩壁厚及装药高度)对双模毁伤元成型性能的影响规律,同时讨论了弧锥结合罩的弧度部分与锥度部分比例的大小对双模成型的影响。数值模拟结果表明:两次优化结果均说明药型罩壁厚是确定头部速度的主要因素,锥角是确定长径比和头尾速度差的主要因素;当第二次优化的各因素水平分别为圆弧曲率半径是0.45倍装药口径,锥角是145°,壁厚是0.04倍装药口径,装药高度是1.0倍装药口径,即弧度部分所占的比例较小时,得到的爆炸成型弹丸(EFP)和聚能杆式侵彻体(JPC)成型效果都较好。

References

[1]  李伟兵,王晓鸣,李文彬,等.药型罩结构参数对多模毁伤元形成的影响[J].弹道学报,9,1(1): 19-23.LI Wei- bing,WANG Xiao-ming,LI Wen-bin,et al.Effect of liner configuration parameter on formation of multimode penetrator[J].Journal of Ballistics,9,1(1): 19-23.
[2]  LI Wei-bing,WANG Xiao-ming,LI Wen-bin.The effect of annular multi-point initiation on the formation and penetration of an explosively formed penetrator[J].International Journal of Impact Engineering,2011: 414-424.
[3]  李成兵,沈兆武,裴明敬.高速杆式弹丸初步研究[J].含能材料,7,5(3): 248-252.LI Cheng-bing,SHEN Zhao-wu,PEI Ming-jing.Preliminary study of high velocity rod-shaped projectile[J].Chinese Journal of Energetic Materials(Hanneng Cailiao),7,5(3): 248-252.
[4]  Livermore.LS-DYNA Keyword User′ Manual[M].California: Livermore Software Technology Corporation,2007.
[5]  袁志发,周静芋.试验设计与分析[M].北京: 高等教育出版社,2000.
[6]  David Bender,Richard Fong,William Ng,et al.Dual mode warhead technology for future smart munitions[C]∥19th International Symposium on Ballistics.Interlaken,Switzerland: Casino Kursaal Congress Center,2001: 679-684.
[7]  蒋建伟,帅俊峰,李娜,等.多模毁伤元形成与侵彻效应的数值模拟[J].北京理工大学学报,8,8(9): 756-8,5.JIANG Jian-wei,SHUAI Jun-feng,LI Na,et al.Numerical simulation of the formation of multimode EFP and its penetration effect to RHA[J].Transactions of Beijing Institute of Technology,8,8(9): 756-8,5.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133